| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. view less | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...view more DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...view more DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...view more DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. view less | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. view less | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...view more DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. view less | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...view more DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. view less | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...view more DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. view less | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...view more DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. view less | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...view more DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. view less | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...view more DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. view less | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...view more DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. view less | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...view more DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. view less | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...view more DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. view less | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...view more DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. view less | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...view more DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...view more DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...view more DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...view more DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. view less | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....view more DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...view more DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. view less | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...view more DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. view less | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...view more DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. view less | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...view more DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...view more DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). view less | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...view more DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. view less | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...view more DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. view less | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...view more DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. view less | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...view more DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). view less | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...view more DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. view less | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| DERCOLYTE A 115 | DRT | A tackifying resin especially recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE A 125 | DRT | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE S 115 | DRT | A tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE S 125 | DRT | DERCOLYTE S 125 is a tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE TS 105 | DRT | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| DERMULSENE 222 | DRT | An aqueous, solvent free resin based on terpene and stabilized rosin ester. It is designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE DEG | DRT | It is an aqueous, solvent free resin based on diethyleneglycol resin. | |
| DERMULSENE HBR 509 | DRT | DERMULSENE HBR 509 is an aqueous, solvent free resin, manufactured at 53% solid. based on a hybrid rosin ester / hydrocarbon resin. | |
| DERMULSENE HBR 70 | DRT | An aqueous, solvent free resin based on a hybrid rosin/hydrocarbon resin. It is designed specifically to tackify and wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE RE 802 | DRT | An aqueous, solvent free resin based on a stabilized rosin ester. It is designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE TR 602 | DRT | An aqueous resin dispersion based on a terpene phenolic resin. It is specifically designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERTOLINE G2L | DRT | A tall oil resin esterified with glycerol. It is a tackifying resin particularly recommended for hot melt adhesives based on EVA or block copolymers. | |
| DERTOLINE P2L | DRT | A tall oil resin esterified with pentaerythritol. It is a tackifying resin mainly recommended for hot melt adhesives based on EVA copolymers. | |
| DERTOLINE PLS | DRT | A highly stabilized tall oil rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or block copolymers. | |
| DERTOPHENE H 150 | DRT | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
| DERTOPHENE T | DRT | A terpene phenolic resin compatible with various elastomers, resins and waxes. It is used to improve the properties of hot melt or solvent based adhesives. | |
| DERTOPHENE T 105 | DRT | A terpene phenolic resin compatible with various elastomers, resins and waxes. It improves the properties of hot melt or solvent adhesives. | |
| DERTOPHENE T 115 | DRT | A terpene phenolic resin compatible with various elastomers. It is suitable for use in solvent based and hot melt based adhesives. | |
| Desmodur® 2460 M | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 2460 M is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related...view more Desmodur® 2460 M is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® 2460 M is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. This product has a 2,2'-MDI of max. 0.8%, a 2,4'-MD of 55.0 ± 5.0%, and a 4,4' MDI of minimum 39.2. view less | |
| Desmodur® 44 M Flakes | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation o...view more Desmodur® 44 M Flakes monomeric diphenylmethane-4,4'-diisocyanate. It is a monomeric diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll ®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins. This product has a 4,4'-MDI of minimum 98.2%, a 2,4'-MDI of maximum 2.8, and a hydrolysable chlorine content of maximum 50mg/kg. view less | |
| Desmodur® 44 M Fused | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur 44 M Fused is a monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is used in the formulation of adhesives and polyurethane coating resins. It s solid at room temperature and liquid above around 40°C. This product has a 4,4'-MDI of min. 98.2%...view more Desmodur 44 M Fused is a monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is used in the formulation of adhesives and polyurethane coating resins. It s solid at room temperature and liquid above around 40°C. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, and a hydrolysable chlorine of maximum 50mg/kg. view less | |
| Desmodur® 44 M Liquid | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 M Liquid is a monomeric diphyylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40°C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyureth...view more Desmodur® 44 M Liquid is a monomeric diphyylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40°C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesives and polyurethane coating resins. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, a hydrolysable chlorine of maximum 50mg/kg, and a dimer of maximum 0.1%. view less | |
| Desmodur® 44 MC Flakes | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Flakes is a monomeric diphenylmethane-4,4'-diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesive and polyurethane...view more Desmodur® 44 MC Flakes is a monomeric diphenylmethane-4,4'-diisocyanate that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll®, Desmophen® and Acclaim® in the formulation of adhesive and polyurethane coating resins. This product has a 4,4'-MDI of min. 98.2%, a 2,4'-MDI of maximum 1.8%, and a hydrolysable chlorine of maximum 50 ± 10mg/kg. view less | |
| Desmodur® 44 MC Fused | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Fused is a monomeric diphenylmethane-4,4'-diisocyanate used in the formulation of adhesives and polyurethane coating resins, and suitable for combination with Baycoll®, Desmophen® and Acclaim®. It is solid at room temperature and liquid ab...view more Desmodur® 44 MC Fused is a monomeric diphenylmethane-4,4'-diisocyanate used in the formulation of adhesives and polyurethane coating resins, and suitable for combination with Baycoll®, Desmophen® and Acclaim®. It is solid at room temperature and liquid above around 40°C. This product has a freezing point of minimum 38.4°C, an MCO content (theoretical) of 33.6% by wt., and a phenyl isocyanate content of maximum 10ppm. view less | |
| Desmodur® 44 MC Liquid | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® 44 MC Liquid is a monomeric diphenylmethane-4,4'-diisocyanate that is used in the formulation of adhesives and polyurethane coating resins. It is a solvent-free, colorless to pale yellow liquid of low viscosity that crystallizes at temperatures ...view more Desmodur® 44 MC Liquid is a monomeric diphenylmethane-4,4'-diisocyanate that is used in the formulation of adhesives and polyurethane coating resins. It is a solvent-free, colorless to pale yellow liquid of low viscosity that crystallizes at temperatures below 38.4°C. This product has dimer of maximum 0.1%, a density at 40°C of approximately 1.19g/cm^3, and a viscosity at 40°C of 4.1mPa·s. view less | |
| Desmodur® BL 1100/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product ...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI and is solvent-free. It can be used in combination with cycloaliphatic diamines such as Laromin® C 260 (BASF) to formulate highly flexible, one-component stoving coatings. This product has a color value (hazen) of ≤ 150, a viscosity at 23°C of 43,000 ± 10,000 mPa·s, and a free NCO content of < 0.2% view less | |
| Desmodur® BL 3272 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3272 MPA is an aliphatic crosslinking stoving urethane resin used in combination with Desmophen® and Alkynol® grades to formulate lightfast, one-pack stoving polyurethane coatings; as an additive in conventional stoving systems to improve the...view more Desmodur® BL 3272 MPA is an aliphatic crosslinking stoving urethane resin used in combination with Desmophen® and Alkynol® grades to formulate lightfast, one-pack stoving polyurethane coatings; as an additive in conventional stoving systems to improve the flexibility and adhesion. This product has a non-volatile content (0.2 g/60 min/80°C) of 72 ± 2%, a viscosity at 23°C of 2,700 ± 750 mPa·s, and a color value (hazen) of ≤ 60. view less | |
| Desmodur® BL 3475 BA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improv...view more Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion. This product has a viscosity at 23°C of 1,000 ± 300 mPa·s, a color value (Iod) of ≤ 4, and a flash point of approximately 41°C. view less | |
| Desmodur® BL 3575/1 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3575/1 MPA/SN is a blocked aliphatic polyisocyanate based on HDI, that can be used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings. This product has a non-volatile content (0.2g/60 min...view more Desmodur® BL 3575/1 MPA/SN is a blocked aliphatic polyisocyanate based on HDI, that can be used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings. This product has a non-volatile content (0.2g/60 min/80°C) of 75 ± 2%, a viscosity at 23°C of 3,600 ± 1,000 mPa·s, and a color value (hazen) of ≤ 100. view less | |
| Desmodur® BL 5375 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 5375 is a blocked aliphatic polyisocyanate based on H12MDI. It can be used in combination with hydroxyl-bearing polyols, especially Desmophen® grades, to formulate lightfast one-component polyurethane stoving coatings; as an additive in conve...view more Desmodur® BL 5375 is a blocked aliphatic polyisocyanate based on H12MDI. It can be used in combination with hydroxyl-bearing polyols, especially Desmophen® grades, to formulate lightfast one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve adhesion and flexibility. This product has a non-volatile content (0.5g/60 min/60°C) of 75 ± 2%, a viscosity of 4000 ± 1500 mPa·s, and a color value (hazen) of ≤ 150. view less | |
| Desmodur® CD-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because...view more Desmodur® CD-L is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because the composition of the product is consistent with guideline EC 2002/72 and conforms to FDA 175 105. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, and a hydrolysable chlorine content of maximum 50mg/kg. view less | |
| Desmodur® CD-S | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and ...view more Desmodur® CD-S is a modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It is a solvent-free liquid, slightly yellowish and of low viscosity at room temperature and crystallizes at lower temperatures. This product has an NCO content of 29.0 - 30.0%, a viscosity (25°C) of 20-50 mPa·s, a hydrolysable chlorine content of maximum 50mg/kg, and a density (20°C) of 1.21kg/l. view less | |
| Desmodur® DA-L | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused b...view more Desmodur® DA-L is a ydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate. Desmodur® DA-L is a solvent-free liquid polyisocyanate, emulsifiable in aqueous polymer dispersions. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids. These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as a crosslinking agent for largely pH-neutral aqueous polymer dispersions, such as polyurethane, polyvinylacetate, polyacrylate and synthetic rubber dispersions. Crosslinking raises the resistance of the bonds to heat, water, plasticizers and numerous solvents. This product has an NCO content of 20.0 ± 1%, a viscosity at 23°C of 3,000 ± 600 mPa·s, and a monomeric HDI of ≤ 0.25%. view less | |
| Desmodur® DN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These h...view more Desmodur® DN is an aliphatic polyisocyanate of low volatility. Desmodur® DN is a solvent-free liquid polyisocyanate that is emulsifiable in water. Any occasional turbidity or precipitation visible is caused by very small amounts of processing aids These have no adverse effect on the processing and final properties of the cured adhesives. It can be used as the crosslinker for largely pH-neutral aqueous polymer dispersions including polyurethane, polyvinyl acetate, polyacrylate and synthetic rubber dispersions. Crosslinking increases the resistance of the bonds to heat, water, plasticisers and many solvents. Compared with Desmodur® DA, Desmodur® DN is characterised by its much lower viscosity and is not prone to turbidity at low storage temperatures. This product has an NCO content of 21.8 ± 0.5%, a viscosity at 23°C (rotation) of 1,250 ± 300 mPa·s, and an HDI monomer content of ≤ 0.25%. view less | |
| Desmodur® E 1160 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity...view more Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity (23°C) of 550 ± 200, and a color (Iodine) of ≤ 3. Desmodur® E 1160 MPA/X is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and mechanical damage. view less | |
| Desmodur® E 1361 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1361 BA is an aromatic polyisocyanate prepolymer based on toluylene diisocyanate. It is used in the formulation of moisture-curing one-pack polyurethane coatings. It has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a vis...view more Desmodur® E 1361 BA is an aromatic polyisocyanate prepolymer based on toluylene diisocyanate. It is used in the formulation of moisture-curing one-pack polyurethane coatings. It has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a viscosity (23°C) of 250 ± 150 mPa·s, and a color (Iodine) of ≤ 3. Desmodur® E 1361 BA is suitable for use in formulating wood coatings, e.g. for parquet flooring and for wall and ceiling paneling, anti-corrosion coatings and impregnating systems for mineral building materials. Formulations based on Desmodur® E 1361 BA protect surfaces against moisture, oil, fuels and aggressive chemicals. view less | |
| Desmodur® E 1361 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1361 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing one-pack polyurethane coatings. This product has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a...view more Desmodur® E 1361 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing one-pack polyurethane coatings. This product has an NCO content of 6.8 ± 0.3%, a non-volatile matter of 61.0 ± 2.0%, a viscosity (23°C) of 500 ± 250 mPa·s, a color (Iodine) of ≤ 3, and a monomer content of ≤ 0.4%. Desmodur® E 1361 MPA/X is suitable for use in formulating transparent wood coatings, e.g. for parquet flooring and for wall and ceiling paneling, anti-corrosion coatings, primers and intermediate coatings. Clear impregnating systems based on Desmodur® E 1361 MPA/X provide surfaces with long-term protection against moisture, oil, fuels and aggressive chemicals. view less | |
| Desmodur® E 14 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 14 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate and is used in the formulation of highly flexible coatings, sealers, and two-pack PU sealing compounds. This product has an NCO content of 3.3 ± 0.2%, a viscosity at 23°...view more Desmodur® E 14 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate and is used in the formulation of highly flexible coatings, sealers, and two-pack PU sealing compounds. This product has an NCO content of 3.3 ± 0.2%, a viscosity at 23°C of 6,800 ± 1,200 mPa·s, and a monomeric TDI of < 0.5%. Desmodur® E 14 can be combined with Hardener® DT to formulate highly flexible sealers. It is used in one-component PU formulations, Desmodur® E 14 will improve flexibility. view less | |
| Desmodur® E 15 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate that is used in the formulation of flexible coatings and sealing compounds. This product has an NCO content of 4.4 ± 0.2%, a viscosity at 23°C of 7,000 ± 1,000 mPa·s, an...view more Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate that is used in the formulation of flexible coatings and sealing compounds. This product has an NCO content of 4.4 ± 0.2%, a viscosity at 23°C of 7,000 ± 1,000 mPa·s, and a monomeric TDI of < 0.5%. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-component systems which yield highly flexible highbuild coatings, e. g. for use as crackbridging coatings on concrete surfaces. Combination with Hardener ® VP LS 2959 produces highly flexible one-component systems, e.g. for coating flat roofs. view less | |
| Desmodur® E 1660 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1660 is an aromatic polyisocynate prepolymer based on toluene diisocyanate. It can be used in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. This ...view more Desmodur® E 1660 is an aromatic polyisocynate prepolymer based on toluene diisocyanate. It can be used in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. This product has an NCO content of 5.3 ± 0.3%, a viscosity at 23°C of 1,600 ± 800 mPa·s, and a monomeric TDI of < 0.5%, and a non-volatile content of 60.0 ± 2.0%. Desmodur® E 1660 is suitable for the formulation of one-component transparent wood finishes, e.g. for parquet, furniture and wall and ceiling paneling. It can also be used as the hardener for two-component coatings. Films based on Desmodur® E 1660 may tear under tough service conditions. Combination with e.g. Desmodur® E 14 or Desmodur® E 1361 is therefore recommended. The ratios must be determined empirically. view less | |
| Desmodur® E 1750 PR | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1750 PR polyisocyanate prepolymer based on toluene diisocyanate 50% solution in methoxypropylacetate/xylene. It is supplied in the formulation of moisture-curing one-component polyurethane coatings. It has an NCO content (supply form) of 5.0 -...view more Desmodur® E 1750 PR polyisocyanate prepolymer based on toluene diisocyanate 50% solution in methoxypropylacetate/xylene. It is supplied in the formulation of moisture-curing one-component polyurethane coatings. It has an NCO content (supply form) of 5.0 - 5.7%, a viscosity at 23°C of 300-450 mPa·s, a solids content of 49-51%, an iodine color value (supply form) of maximum 2, and a monomeric TDI (supply form) of maximum 0.5%.Desmodur® E 1750 PR is suitable for the formulation of wood coatings, e.g. for parquet, panelling for walls and ceilings, boats and furniture and of impregnating agents for mineral construction materials, etc. Clear coatings based on Desmodur® E 1750 PR provide surfaces with durable protection against moisture, oil fuel, aggressive chemicals and mechanical impact. view less | |
| Desmodur® E 20100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 20100 is a modified polyisocyanate prepolymer based on diphenylmethane diisocyanate. It is used as an injection resin for sealing water-conveying cracks in structures above and below ground. This product has an NCO content of 15.7 ± 0.5%, a vi...view more Desmodur® E 20100 is a modified polyisocyanate prepolymer based on diphenylmethane diisocyanate. It is used as an injection resin for sealing water-conveying cracks in structures above and below ground. This product has an NCO content of 15.7 ± 0.5%, a viscosity at 23°C of 1,100 ± 400 mPa·s, a flash point of > 200°C, and a density at 20°C of approximately 1.12g/cm^3. Desmodur® E 20100 is an injection resin used primarily to seal water breakthroughs in underground structures and to displace water from water-conveying cracks and voids. It is applied by a high- or low-pressure process using suitable injection packers view less | |
| Desmodur® E 21 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is used as a raw material in the formulation of solvent-borne one-pack polyurethane coatings which cure by reaction with atmospheric moisture. This pr...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is used as a raw material in the formulation of solvent-borne one-pack polyurethane coatings which cure by reaction with atmospheric moisture. This product is also a binder for the formulation of moisture-curing, one-component coatings and adhesives; and a hardener for hydroxyl-bearing co-reactants. Desmodur® E 21 has an NCO content of 16.0 ± 0.7%, a viscosity 25°C of 5,400 ± 1,300 mPa·s, and an equivalent weight of 251-274. view less | |
| Desmodur® E 2190 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 2190 X is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. This produ...view more Desmodur® E 2190 X is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). As a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. This product has an NCO content of 14.3 ± 0.5, a viscosity at 25°C of 1,100 ± 400 mPa·s, a flash point of approx. 25°C, a density at 20°C of approx. 1.11g/ml. Desmodur® E 2190 X is ideal for the formulation of moisture-curing, one-component primers and sealers to protect porous substrates against moisture, oil, fuels and other chemicals. A further use is as a binder for highperformance anti-corrosion coatings for steel in hydraulic and civil engineering engineering applications. view less | |
| Desmodur® E 22 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible a...view more Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, roof and concrete sealers and rubber granules. This product has an NCO content of 8.6 ± 0.3%, a viscosity at 23°C of 2,800 ± 400 mPa·s, and an equivalent weight of 472-506. Desmodur® E 22 is suitable for the flexibilization of Desmodur® E 21/E 23 or similar products and as a binder for rubber granules. Desmodur® E 22 is also suitable for use in the formulation of solvent-free moisture-curing one-component adhesives or in combination with Baycoll to formulate two-component adhesives. These can be used to bond many materials, e.g. wood, metal and plastic. view less | |
| Desmodur® E 2200/76 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 2200/76 is a prepolymer based on diphenylmethane-diisocyanate (MDI) with isomers. It is a solvent-free, colorless to yellowish liquid that is viscous at room temperature. This product has an NCO content of 9.85 ± 0.25%, a density 20°C of appro...view more Desmodur® E 2200/76 is a prepolymer based on diphenylmethane-diisocyanate (MDI) with isomers. It is a solvent-free, colorless to yellowish liquid that is viscous at room temperature. This product has an NCO content of 9.85 ± 0.25%, a density 20°C of approx. 1.09g/cm^3, and a flash point of ≥ 200°C. Desmodur® E 2200/76 can be used as a raw material for the formulation of solvent-free, moisture-curing, one-component adhesives or in combination with Baycoll® for the formulation of two-component adhesives. Such adhesives can be used to bond a wide variety of materials such as wood, metal and plastic. view less | |
| Desmodur® E 23 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 23 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Used as a binder for moisture-curing, one-pack coatings and as a hardener for binders bearing OH-groups. This product has an NCO content of 15.4 ± 0.4%, an equ...view more Desmodur® E 23 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Used as a binder for moisture-curing, one-pack coatings and as a hardener for binders bearing OH-groups. This product has an NCO content of 15.4 ± 0.4%, an equivalent weight of 266-280, and a flash point of > 193°C. Desmodur® E 23 is suitable for use in the formulation of moisture-curing one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less | |
| Desmodur® E 3265 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile...view more Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile content of 65.0 ± 2.0%, a color value (Iod) of ≤ 4, and a monomeric HDI of < 0.5%. Desmodur® E 3265 MPA/SN is suitable for use in the formulation of weather-stable and colorfast outdoor coatings with very good resistance to solvents, abrasion and chemicals. view less | |
| Desmodur® E 3370 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 3370 is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate, that can be used in the formulation of moisture-curing one-pack polyurethane coatings with good weather stability. It is suitable for the formulation of weathe...view more Desmodur® E 3370 is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate, that can be used in the formulation of moisture-curing one-pack polyurethane coatings with good weather stability. It is suitable for the formulation of weather-stable and colourfast coatings with very good resistance to solvents, abrasion and chemicals for use in exterior applications. This product has an isocyanate content of 10.0 ± 0.5%, a non-volatile content of 70.0 ± 1.0%, and a monomeric HDI (supply form) of < 0.5%. view less | |
| Desmodur® E XP 2723 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. Thi...view more Desmodur® E XP 2723 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI) that is a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. This product has an NCO content of approx. 15.4%, a flash point of approx. 223°C, and a density at 20°C of approx. 1.12 g/ml. Desmodur® E XP 2723 is suitable for use in the formulation of moisture-curing one-component systems which, when thinned with a suitable solvent, can be used as a primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. In combination with suitable Desmophen® polyols, Desmodur® E XP 2723 yields tough but flexible, wear-resistant coatings and sealers. view less | |
| Desmodur® E XP 2727 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E XP 2727 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate that is used for one- and two-component polyurethane and polyurea coatings, adhesives and sealants. This product has a NCO content of 15.25 ± 0.25%, a visco...view more Desmodur® E XP 2727 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate that is used for one- and two-component polyurethane and polyurea coatings, adhesives and sealants. This product has a NCO content of 15.25 ± 0.25%, a viscosity at 23°C of 800 ± 200 mPa·s, and an equivalent weight of approx. 275. Desmodur® E XP 2727 is suitable for the formulation of moisture-curing polyurethane coatings, adhesives and sealants. Desmodur® E XP 2727 is also suitable as a hardener for two-component polyurethane and polyurea coatings, possibly in combinationn with other polyisocyanates. view less | |
| Desmodur® H | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® H is a monomeric aliphatic diisocyanate that can be used in the manufacture of polyisocyanates, e.g. polyurethane coating raw materials. It has an assay (CG) of ≥ 99.5%, a hydrolyzable chlorides of ≤ 100mg/kg, a total chlorides amount of ≤ 800mg...view more Desmodur® H is a monomeric aliphatic diisocyanate that can be used in the manufacture of polyisocyanates, e.g. polyurethane coating raw materials. It has an assay (CG) of ≥ 99.5%, a hydrolyzable chlorides of ≤ 100mg/kg, a total chlorides amount of ≤ 800mg/kg, and a viscosity at 25°C of approx. 3mPa·s. view less | |
| Desmodur® HL BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® HL BA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It can be used with Desmophen® grades or other substances containing hydroxyl groups to make clear or pigmented, two-pack polyurethane coa...view more Desmodur® HL BA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It can be used with Desmophen® grades or other substances containing hydroxyl groups to make clear or pigmented, two-pack polyurethane coatings with rapid drying and good lightfastness. The rapid initial drying and early sandability are of particular advantage when formulating wood coatings. With just a few coats, high-bodied clear or pigmented finishes can be easily achieved. This product has a viscosity at 23°C of 2,200 ± 1,000 mPa·s, a flash point of +28°C, and a density at 20°C of approximately 1.13g/ml. view less | |
| Desmodur® HL EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® HL EA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It has a viscosity at 23°C of 1,100 ± 600 mPa·s, a flash point of -2°C, and a density at 20°C of approx. 1.12g/ml. This product can be use...view more Desmodur® HL EA is an aromatic/aliphatic polyisocyanate based on toluylene diisocyanate/ hexamethylene diisocyanate. It has a viscosity at 23°C of 1,100 ± 600 mPa·s, a flash point of -2°C, and a density at 20°C of approx. 1.12g/ml. This product can be used in combination with various Desmophen® grades or other suitable substances containing hydroxyl groups to formulate clear or pigmented, two-component polyurethane coatings characterized by rapid drying and good lightfastness. The rapid initial drying and early sandability are of particular advantage when formulating wood coatings. With just a few coats, high-bodied clear or pigmented finishes can be easily achieved. Desmodur® HL EA can also be used to formulate high-quality coatings for paper and foils. view less | |
| Desmodur® I | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® I is a monomeric cycloaliphatic diisocyanate that is used in the manufacture of polyisocyanates and polyurethanes. It has a viscosity at 23°C of approx. 10 mPa·s, a flash point of approx. 155°C, a density at 20°C of approx. 1.06g/ml, and a total...view more Desmodur® I is a monomeric cycloaliphatic diisocyanate that is used in the manufacture of polyisocyanates and polyurethanes. It has a viscosity at 23°C of approx. 10 mPa·s, a flash point of approx. 155°C, a density at 20°C of approx. 1.06g/ml, and a total chlorides amount of ≤ 200mg/kg. view less | |
| Desmodur® IL 1351 51% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. It has an isocyanate content of 8.0 ± 0.3%, a viscosity at 23°C of 1,300 ± 450 mPa·s, and a flash point of approx. 26°C. This product is a hardener component for fast dr...view more Desmodur® IL 1351 51% BA is an aromatic polyisocyanate based on toluene diisocyanate. It has an isocyanate content of 8.0 ± 0.3%, a viscosity at 23°C of 1,300 ± 450 mPa·s, and a flash point of approx. 26°C. This product is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 51% BA can be used in combination with e.g. Desmophen® 1300 for the formulation of very fast drying systems. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. view less | |
| Desmodur® IL 1351 51% EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1351 51% EA is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 EA can be used in combination with e.g. Desmophen® 1300 for the formul...view more Desmodur® IL 1351 51% EA is an aromatic polyisocyanate based on toluene diisocyanate. It is a hardener component for fast drying, two-component polyurethane coatings. Desmodur® IL 1351 EA can be used in combination with e.g. Desmophen® 1300 for the formulation of very fast drying systems. Such systems are used in the furniture industry, among others, where very short drying times and early sandability are required. This product has a viscosity at 23°C of 350 ± 50 mPa·s, a flash point of approx. -6°C, and a density at 20°C of approx. 1,12g/ml. view less | |
| Desmodur® IL 1451 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene disocyanate, used as the hardener component for fast-drying two-pack polyurethane coatings. Two-component polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid in...view more Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene disocyanate, used as the hardener component for fast-drying two-pack polyurethane coatings. Two-component polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is of use above all in industrial wood and furniture finishing. This product has a viscosity at 23°C of 250 ± 75 mPa·s, a flash point of approx. 26°C, and a density at 20°C of approx. 1,07 g/ml. view less |
