| Desmophen® 1300 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1...view more Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1, a viscosity at 23°C of 1,000 ± 200 mPa·s, and an equivalent weight of approx. 530. Desmophen® 1300 BA is especially suitable for the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. view less | |
| Desmophen® 1300 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 m...view more Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 mPa·s. Desmophen® 1300 EA is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. view less | |
| Desmophen® 1300 PR 75 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 PR 75 X is a hydroxyl-bearing polyester. It is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. | |
| Desmophen® 1300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g r...view more Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 75 ± 1. Desmophen® 1300 X is especially suitable for the formulation of fast-drying two-pack systems. These are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. view less | |
| Desmophen® 1380 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...view more Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity at 25°C of 600 ± 50 mPa·s. This product has an OH equivalent weight of approx. 146g, a hydroxyl number of 385 ± 15mg KOH/g, and an acid number of ≤ 0.5mg KOH/g. Desmophen® 1380 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1380 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). view less | |
| Desmophen® 1388 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1388 EA is a fatty acid-modified, saturated polyester resin, used as a coreactant for Desmodur® L 75, IL, HL and N 75 for the formulation of two-component polyurethane coatings. This product has a non-volatile content (2g resin/2ml toluene/1h a...view more Desmophen® 1388 EA is a fatty acid-modified, saturated polyester resin, used as a coreactant for Desmodur® L 75, IL, HL and N 75 for the formulation of two-component polyurethane coatings. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 71.0 ± 1.5, an iodine color value of < 5, and an equivalent weight of approx. 360. When used in combination with Desmodur® IL and L 75, or even better with mixtures thereof, Desmophen® 1388 EA is particularly well suited for use in the formulation of sandable wood primers with good flexibility, adhesion and overcoatability. When used in combination with Desmodur® L 75 or N 75, it can be used for the formulation of topcoats with good properties with respect to leveling, body, color brilliance, polishability and scratch resistance. view less | |
| Desmophen® 1400 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...view more Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity of 370 ± 40 mPa·s. This product has an acid number of max. 0.1mg KOH/g, an OH equivalent weight of approx. 140g, and a hydroxyl number of 400 ± 20mg KOH/g. Desmophen® 1400 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1400 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). view less | |
| Desmophen® 1400 PR 75% MIBK | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding seal...view more Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding sealers and two-component clear and pigmented top coats for wood. It can be also used in coating systems for metal and plastics. This product has an iodine color value (50% solution) of < 5, a flash point of < 3°C, and a viscosity at 23°C of 13.000 ± 2.000 mPa·s. view less | |
| Desmophen® 1652 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C...view more Desmophen® 1652 is a linear hydroxyl-bearing polyester, solvent-free liquid polyol, that is ideally used in the formulation of flexible PU coatings. This product has a pour point of approx. -12°C, a density at 20°C of approx. g/ml, and a viscosity at 23°C of 11,000 ± 2,000 mPa·s. Desmophen® 1652 is used in combination with Desmodur® VL to formulate flexible solvent-free coatings and sealers. If Desmodur® L or HL are used, the formulations will only yield a drying film if they are greatly overcrosslinked. view less | |
| Desmophen® 1700 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent ...view more Desmophen® 1700 is a branched, solvent-free saturated polyester resin normally only used as a plasticizing resin with other polyesters. It is soluble in aromatic hydrocarbons and has no solubility in aliphatic hydrocarbons. This product has an equivalent weight of approx. 1310, a viscosity at 23°C of 17,500 ± 2,500 mPa·s, and a pour point of approx. -5°C. Combinations of Desmophen® 1700 with various polyisocyanates yield highly flexible coatings. For this reason, the product is normally used as the flexibilizing component in combination with other Desmophen® grades. In certain combinations, e.g. with Desmophen® 800, the addition of Desmophen® 1700 increases the toughness and resistance to wear and abrasion of the paint films. Such combinations can be used to coat furniture, floors and parquet. view less | |
| Desmophen® 1800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C,...view more Desmophen® 1800 is a solvent-free, slightly branched saturated polyester polyol resin used in the formulation of flexible polyurethane coatings, in adhesives, and foams. This product has an equivalent weight of approx. 935, a flash point of approx. 240°C, and a density at 20°C of approx. 1.19g/ml. In combination with Desmodur® L, Desmophen® 1800 yields highly flexible coatings for rubber and plastics and high-build flexible finishes. If necessary, it can be combined with other Desmophen® grades. view less | |
| Desmophen® 2060 BD | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1...view more Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1.7 ± 0.05 % by wt., and a viscosity at 25°C of 310 ± 25 mPa·s. Desmophen® 2060 BD is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). view less | |
| Desmophen® 5035 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free...view more Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,600g, a hydroxyl number of 35.0 ± 2.0mg KOH/g, and a viscosity at 25°C of 860 ± 70 mPa·s. Desmophen® 5035 BT is suitable for combination with many Desmodur® products in the formulation of elastic coatings and adhesives. It is suitable as a raw material in the formulation of low-solvent reactive adhesives and coatings. Desmophen® 5035 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). view less | |
| Desmophen® 5168 T | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5168 T is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. This product is a solvent-free, ...view more Desmophen® 5168 T is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. This product is a solvent-free, pale-coored, low-viscosity linear polypropylene ether polyol liquid. Desmophen® 5168 T has a hydroxyl number of 28.0 ± 2.0mg KOH/g, a viscosity at 25°C of 870 ± 70 mPa·s, and an OH equivalent weight of approx. 2,000g. view less | |
| Desmophen® 631 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 631 MPA is a saturated polyester resin. | |
| Desmophen® 650 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. Th...view more Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester is used mainly as a co-reactant with Desmodur® N 75. This combination results in coatings with excellent lightfastness, gloss retention, weather stability, and two-pack polyurethane coatings. They also have very good resistance to chemicals and high abrasion resistance. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 64±2%, a flash point of approx. 46°C, and a hazen color value of ≤ 100. view less | |
| Desmophen® 650A 65 PMA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings. | |
| Desmophen® 651 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very g...view more Desmophen® 651 MPA is a branched hydroxyl-bearing polyester s mainly used as a co-reactant with Desmodur® N 75. This combination yields coatings with excellent lightfastness, gloss retention, weather stability, and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 65±1%, a flash point of approx. 40°C, and a hazen color value of ≤ 100. view less | |
| Desmophen® 651 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemical...view more Desmophen® 651 MPA/X is a branched hydroxyl-bearing polyester that is used as a co-reactant, usually for Desmodur N 75, in the formulation of lightfast, gloss retention, weather-stable and two-pack coatings. They also have very good resistance to chemicals and abrasion. This product has a non-volatile content (1g resin/1ml TCP*/1h at 125°C, convection oven) of 67±1%, a flash point of approx. 32°C, and an acid value of ≤ 3mg KOH/g. view less | |
| Desmophen® 670 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics an...view more Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 can be used as a flexibilizer in other DD coating systems. This product has a viscosity at 23°C (80% in butyl acetate) of 2,200 ± 400 mPa·s, a pour point of approx. + 8°C, and an acid value of 2 ± 1mg KOH/g. view less | |
| Desmophen® 670 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are ma...view more Desmophen® 670 BA is a slightly branched hydroxyl-bearing polyester that is used as a co-reactant primarily with Desmodur® N 75 and N 3390, which yields films with very good weather stability and excellent low temperature flexibility. Such coatings are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 BA can also be added to other two-component polyurethane systems to improve their flexibility. This product has a flash point of approx. 32°C, an acid value of 1.8±1mg KOH/g, and a non-volatile content (1g resin/1h 125°C, convection oven) of 80±1%. view less | |
| Desmophen® 680 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be use...view more Desmophen® 680 BA is a branched hydroxyl-bearing polyester that is ideally used as a co-reactant for Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying two-component coatings. This product as a viscosity at 23°C of 3,000 ± 500 mPa·s, a non-volatile content (2g resin/2ml toluene/1h 125°C, convection oven) of 70±1%, and a flash point of approx. 32°C. Desmophen® 680 BA is a hard co-reactant for use with Desmodur® N. The drying properties of this combination are comparable with those of the acrylic Desmophen® resin/Desmodur® N systems developed specially for automotive repair paints. It is therefore particularly suitable for the formulation of air-drying automotive and industrial coatings. Coatings crosslinked with Desmodur® L and HL are particularly fast-drying, making them suitable for applications such as paper finishing. view less | |
| Desmophen® 680 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in comb...view more Desmophen® 680 X is a hydroxyl-bearing polyester, and is ideally used as a co-reactant with Desmodur® N in the formulation of two-component polyurethane coatings with good gloss retention, lightfastness and chalking resistance. It can also be used in combination with Desmodur® L and HL in the formulation of fast-drying, two-component coatings. Desmophen® 680 X is a hard co-reactant for Desmodur® N grades. The drying of such combinations is comparable with that of the acrylic resin/Desmodur® N systems developed specially for vehicle repair. They are therefore particularly suitable for use in the formulation of air-drying automotive and industrial coatings. Crosslinking with Desmodur® L and HL results in very fast-drying coatings which can be used in, for example, paper finishing. view less | |
| Desmophen® 690 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value o...view more Desmophen® 690 MPA is a branched hydroxyl-bearing polyester is mainly used as a co-reactant with Desmodur® N to formulate relatively fast-drying, colourfast, weather-stable coatings and two-component polyurethane coatings. This product has an acid value of ≤ 6%, a hydroxyl content of 1.4 ± 0.2%, and a non-volatile content (1g resin/1h 125°C, convection oven) 70 ± 2%. view less | |
| Desmophen® 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropyla...view more Desmophen® 800 is a solvent-free, highly branched polyester bearing hydroxyl resin of high viscosity, and is used in the formulation of two-component PU coatings. This product has a pour point of approx. +11°C, a viscosity at 23°C (70% in 1-methoxypropylacetate-2) of 850 ± 150 mPa·s, and an equivalent weight of approx. 200. With Desmodur® L as the reaction partner, Desmophen® 800 yields hard films with good chemical resistance. These coatings are also characterized by high impact resistance, toughness and abrasion resistance. As a combination polyol with Desmophen® 1100, Desmophen® 800 can be used to formulate floor coatings with high abrasion resistance. view less | |
| Desmophen® 800 80% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatil...view more Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 80 ± 1%. When combined with Desmodur® L, Desmophen® 800 80 % BA yields hard and chemically resistant films. The coatings are also caracterised by their high impact strength, toughness and resistance to abrasion. When combined with Desmophen® 1100, it yields floor coatings with high resistance to abrasion. view less | |
| Desmophen® 800 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60...view more Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60°C, a flash point of approx. -4°C, an equivalent weight of approx. 320, and hazen color value of ≤ 250. view less | |
| Desmophen® 800 MPA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When c...view more Desmophen® 800 MPA is a highly branched, hydroxyl-bearing polyester used in the formulation of two-pack polyurethane coatings. This product has an acid value of < 4mg KOH/g, an equivalent weight of approx. 225, and a pour point of approx. -11°C. When combined with Desmodur® L, Desmophen® 800 MPA yields hard and chemically resistant films. The coatings are also characterised by their high impact strength, toughness and resistance to abrasion. A combination with Desmophen® 1100 yields floor coatings with high resistance to abrasion. view less | |
| Desmophen® 850 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coat...view more Desmophen® 850 is a linear polyester bearing hydroxyl group used in combination with other Desmophen® grades in the formulation of two-component PU coatings. Desmophen® 850 can be combined with other suitable Desmophen® grades to formulate laminating coatings. This product has a pour point of approx. +10°C, a hazen color value (70% in 1-methoxypropylacetate-2) of ≤ 200, and a viscosity at 75°C of 410 ± 50 mPa·s. view less | |
| Desmophen® C 1100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of...view more Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of approx. 0.1mg KOH/g, and a viscosity at 23°C of 3,200 ± 1,300 mPa·s. In combination with polyisocyanates as a high-grade building block for the formulation of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. view less | |
| Desmophen® C 1200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability,...view more Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. This product has a viscosity at 23°C of 16,500 ± 2,500 mPa·s, a hazen color value of < 150, and a hydroxyl content of 1.7 ± 0.2%. view less | |
| Desmophen® C 2100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good...view more Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. It has a hydroxyl content of 3.3 ± 0.3%, viscosity at 75°C of 410 ± 110 mPa·s, and an equivalent weight of approx. 500. view less | |
| Desmophen® C 2200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very...view more Desmophen® C 2200 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approximately 2000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a viscosity at 75°C 2,300 ± 750 mPa·s, a density at 20°C of approx. 1.14g/cm^3. view less | |
| Desmophen® C XP 2716 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very goo...view more Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a hydroxyl content of approx. 5.2%, an acid number of approx. 0.1mg KOH/g, and a water content of approx. 0.05%. view less | |
| Desmophen® NH 1220 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1220 is a solvent-free, low-viscosity, aminofunctional co-reactant resin for polyisocyanate developed for use in the formulation of tough but flexible, lightfast and highly reactive two-component polyurethane/polyurea spray coatings. This pr...view more Desmophen® NH 1220 is a solvent-free, low-viscosity, aminofunctional co-reactant resin for polyisocyanate developed for use in the formulation of tough but flexible, lightfast and highly reactive two-component polyurethane/polyurea spray coatings. This product has an amine value of 240-248mg KOH/g, a flash point of > 97°C, and a density at 20°C of approx. 1.066g/ml. view less | |
| Desmophen® NH 1420 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1420 is a solvent-free, low-viscosity, amine-functional co-reactant resin developed for use in the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has an amine value of 199-203...view more Desmophen® NH 1420 is a solvent-free, low-viscosity, amine-functional co-reactant resin developed for use in the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has an amine value of 199-203mg KOH/g, a viscosity at 25°C of 900-2,000 mPa·s, and an equivalent weight of approx. 276. view less | |
| Desmophen® NH 1520 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a ...view more Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a flash point of approx. 74°C, and an amine value of 189-193mg KOH/g. view less | |
| Desmophen® NH 1521 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1521 is an amino-functional co-reactant for polyisocyanates, and is used for the manufacture of high-solids, two-component polyurethane coating formulations. This product has an amine number of 168-176mg KOH/g, a solvent content (GC method) ...view more Desmophen® NH 1521 is an amino-functional co-reactant for polyisocyanates, and is used for the manufacture of high-solids, two-component polyurethane coating formulations. This product has an amine number of 168-176mg KOH/g, a solvent content (GC method) of 9-11%, and an equivalent weight of approx. 326. Desmophen® NH 1521 is a reactive thinner which is suitable, either alone or in combination with suitable OH-functional polyacrylates and cured with e. g. Desmodur® N 3600 or N 3390, for the formulation of high-solids primer fillers and topcoats for automotive refinishing applications. view less | |
| Desmophen® PL 300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ c...view more Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ convection oven) of 60 ± 1, an iodine color value, 50 % resin of max. 5, and a viscosity at 23°C of 5,350 ± 150 mPa·s. Desmophen® PL 300 is highly reactive and yields good transparency, level-ling and gloss. It can also be used to formulate primers with a higher solids content than those based on highly condensed resins. In such coatings, the product yields good overcoatability and early sand-ability. view less | |
| Desmophen® PL 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This prod...view more Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of approx. 70%, a hydroxyl content (supply form) of approx. 2.5%, and an iodine color value (50% resin) of max. 2. Desmophen® PL 800 is characterised by excellent pigment wetting and gloss. It is therefore especially suitable for the formulation of high-gloss pigmented polyurethane finishes. Coatings formulated with Desmophen® PL 800 have low application viscosity and a long pot life, good yellowing resistance, excellent elasticity and high body. Generally speaking, the product has good compatibility. However, this should be tested in each individual case. view less | |
| Desmophen® PL 817 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of...view more Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of 10,000 ± 2,000 mPa·s, a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 75 ± 1, and an acid value (supply form) of 3.3 ± 0.2%. Desmophen® PL 817 is suitable for combination with highly condensed resins in the formulation of primers with a high solids content. No significant deterioration in reactivity, sandability or chemical resistance is observed compared with formulations based solely on this type of binder. In top coat formulations, Desmophen® PL 817 yields films with good surface hardness and matting. Generally speaking, Desmophen® PL 817 has good compatibility with a large number of physically drying binders (e.g. nitrocellulose). However, compatibility tests should be carried out in each individual case. view less | |
| Desmophen® T 1665 SN/IB | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings a...view more Desmophen® T 1665 SN/IB is an oil-free, hydroxyl-bearing, saturated polyester that is used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings and general industrial coatings with very good weather stability. This product has a density at 20°C (solvent-free) of approx. 1.17g/ml, a hydroxyl content (theoretical) of approx. 1.17%, and an OH equivalent weight (supply form) of approx. 1,000. view less | |
| Desmophen® T 1775 SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for...view more Desmophen T 1775 SN is an oil free, hydroxyl-bearing polyester that is used in the formulation of lightfast one-component polyurethane baking coatings with blocked aliphatic polyisocyanates. It is binder certified for use in food-contact applications for the formulation of can coatings for food packaging. This product has a non-volatile content (2g resin/2ml toluene/1h 125°C/convection oven) of 75 ± 2%, a density at 20°C of approx. 1.08g/ml, and a viscosity at 23°C of 3,700 ± 600 mPa·s. Desmophen T 1775 SN was developed specially as a co-reactant for blocked polyisocyanates in coil coating applications. When combined with preferably Desmodur BL 4265, it yields one-component polyurethane coil coatings with a balanced hardness/flexibility ratio, good resistance to scratching and abrasion as well as excellent QUV/B stability. Dibutyltin dilaurate has proved suitable as the catalyst. The addition should be 0.1–1 %, calculated on the solid binder. The product can be combined with other blocked isocyanates and HMMM-type amino resins. However, such formulations do not generally achieve the same high surface hardness as is achieved with Desmodur BL 4265. view less | |
| Desmophen® VP LS 2249/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an...view more Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an acid value of approx. 2mg KOH/g, a flash point of approx. 130°C, a hydroxyl content of 15.5 ± 1%, and a viscosity at 23°C of 1,900 ± 200 mPa·s. Desmophen® VP LS 2249/1 is used as the hardener component in weather-stable polyurethane systems. The preferred polyol combinations are mixtures with, for example, Desmophen® 1150 or Desmophen® C 1100. Desmophen® VP LS 2249/1 is used in the formulation of hard coatings, sealing compounds and mortars for decorative gravel. The aforementioned Desmodur® grades are among the suitable co-reactants. view less | |
| Desmophen® VP LS 2328 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ±...view more Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ± 0.35%, an acid value of < 0.5mg KOH/g, and a vscosity at 23°C of 800 ± 50 mPa·s. Desmophen® VP LS 2328 is used as the flexibilising component in two-component polyurethane coatings. Preferred polyol combinations are mixtures with e.g. Desmophen® VP LS 2249/1 as the hard component to achieve the desired flexibility. Desmophen® VP LS 2328 is suitable for the formulation of highly flexible polyurethane coatings. Combination with Desmophen® VP LS 2249/1 yields systems of medium flexibility. view less | |
| Desmophen® VP LS 2388 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor wea...view more Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications. This product has a non-volatile content (1g,1h,125°C) of 80 ± 2%, a viscosity at 23°C of 3,000 ± 500 mPa·s, an equivalent weight of approx. 450. Desmophen® VP LS 2388 is used primarily in combination with Desmodur® N 75 and Desmodur® N 3390 in the formulation of fast-drying, high-solids, two-component polyurethane coatings characterised by good lightfastness and weather stability, high film elasticity and good tar resistance. Of particular note is the better QUV performance and tar resistance compared with a Desmodur® N / Desmophen® 670 combination. The film elasticity values are comparable with those yielded by Desmophen® 670. view less | |
| Dispercoll® C 84 | Covestro (formerly Bayer MaterialScience) 科思创 | Dispercoll® C 84 is an aqueous colloidal dispersion of a 2-chlorobutadiene polymer with a high rate of crystallization. It is suitable for the formulation of aqueous adhesives for use in the footwear, construction, furniture, mattress and automotive indus...view more Dispercoll® C 84 is an aqueous colloidal dispersion of a 2-chlorobutadiene polymer with a high rate of crystallization. It is suitable for the formulation of aqueous adhesives for use in the footwear, construction, furniture, mattress and automotive industries. This product has a minimum film-forming temperature of approx. 5°C, an apparent viscosity by the Brookfield Test method (LV / Sp2 / 60 rpm/ 25°C) of approx. 100 mPa·s, and a density of approx. 1.12g/cm^3. view less | |
| Dispercoll® U 58 | Covestro (formerly Bayer MaterialScience) 科思创 | Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make ...view more Dispercoll® U 58 is a waterborne dispersion of an anionically modified polyurethane. It is an adhesives raw material for the formulation of adhesives for use in e.g. the shoe, furniture or automotive industries. Its characteristic polymer properties make Dispercoll® U 58 particularly well suited for heat activated bonding applications with high tack and good initial heat resistance. view less | |
| Eunox AO-1098 | Eutec Chemical Co., Ltd. | Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for ...view more Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for polymers such as adhesives, elastomers and other other organic substrates. view less | |
| Eunox AO-1222 | Eutec Chemical Co., Ltd. | Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-...view more Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-oxidative degradation. view less | |
| Eunox AO-129 | Eutec Chemical Co., Ltd. | Eunox AO-129 is a white crystalline powder and a primary antioxidant for organic polymers during processing–reducing viscosity change and gel formation. This product provides long-term heat stability in products including adhesives. | |
| Eunox AO-136 | Eutec Chemical Co., Ltd. | Eunox AO-136 is a white powder with a melting point between 130-135℃. This product is used as an antioxidant in several polymers including elastomers and adhesives. | |
| Eunox AO-1425 | Eutec Chemical Co., Ltd. | Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against th...view more Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against thermo-oxidative degradation while retaining strong color retention. view less | |
| Eunox AO-1425 (HQ) | Eutec Chemical Co., Ltd. | Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesiv...view more Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives. It protects against thermo-oxidative degradation and has strong color retention and compatibility. view less | |
| Eunox AO-1726 | Eutec Chemical Co., Ltd. | Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU seal...view more Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU sealants. view less | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and an effective non-discoloring aromatic amine type antioxidant. It can be used as a thermal stabilizer in many applications including hot melt adhesives. | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and a non-toxic, tasteless and light colored antioxidant. This product can be applied to adhesives and provides resistance to heat, light and aging. | |
| Eunox AO-565 | Eutec Chemical Co., Ltd. | Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining d...view more Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining due to its low volatility, has a low melting point for easy dispersion and contains durability for processing, drying and storage. view less | |
| Eunox AO-616 | Eutec Chemical Co., Ltd. | Eunox AO-616 is a cream to amber colored powder and a non-discoloring, non-staining antioxidant, containing high activity and low volatility. This product can be used in tackifiers, adhesives and sealants | |
| Eunox AO-626 | Eutec Chemical Co., Ltd. | Eunox AO-626 is a white crystalline powder with a minimum melting point of 160℃ and a 1% acid value. This product can be used processing stabilizer for elastomers and adhesives. For best effect, it is used with hindered phenolic antioxidants. | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...view more Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. view less | |
| Eusorb UV-571 | Eutec Chemical Co., Ltd. | Eusorb UV-571 is yellow and clear liquid used as an efficient UV-absorber that can be applied to coatings and adhesives. It is commonly applied to non-staining formulations for polyamide fibers and spin finished for polyamides, PET, PUR and PP fibers. | |
| Eusorb UV-694 | Eutec Chemical Co., Ltd. | Eusorb UV-694 is a light yellow to off-white powder used as an efficient, colorless UV absorber for various polymers including coatings and adhesives. This product contains strong absorptivity in the sensitive UV region while retaining minimal physical lo...view more Eusorb UV-694 is a light yellow to off-white powder used as an efficient, colorless UV absorber for various polymers including coatings and adhesives. This product contains strong absorptivity in the sensitive UV region while retaining minimal physical losses and compatibility. view less | |
| Eusorb UV-9 (BP-3) | Eutec Chemical Co., Ltd. | Eusorb UV-9 (BP-3) is a pale yellow crystalline powder with a minimum melting point of 62℃. This product is used as a UV-absorber in a variety of products including adhesives. | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eustab HS-700 | Eutec Chemical Co., Ltd. | Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system...view more Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system adhesives. view less | |
| Eustab LS-292 | Eutec Chemical Co., Ltd. | Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its...view more Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its solubility in polyols and demonstrates reduced interaction with co-additives such as pigments and other stabilizers. view less | |
| Eustab LS-3853 | Eutec Chemical Co., Ltd. | Eustab LS-3853 is a waxy solid and an efficient liquid hindered amine light stabilizer. It is for use in polypropylene, polyethylene, styrenics, unsaturated polyesters, acrylics, vinyl polymers including adhesives, sealants and coatings. | |
| Impranil® 43031 Lösung | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® 43031 Lösung is a one-component polyester urethane based on an aliphatic diisocyanate. It has a viscosity at 23°C of 7,000-15,000 mPa·s, and a non-volatile content (0.9–1.1g/1h/125°C, convection oven) of 25 ± 1°C. Impranil® 43031 solution is use...view more Impranil® 43031 Lösung is a one-component polyester urethane based on an aliphatic diisocyanate. It has a viscosity at 23°C of 7,000-15,000 mPa·s, and a non-volatile content (0.9–1.1g/1h/125°C, convection oven) of 25 ± 1°C. Impranil® 43031 solution is used as a topcoat and finish for PVC coatings requiring high surface smoothness and reduced migration of PVC plasticizers. It is also suitable for use as a topcoat for lining materials, especially for shoe linings with an adhesive polyurethane coating and for polyurethane, PVC and polyacrylate foams used on suitable non-wovens, wovens, knitted fabrics and coagulated substrates. Impranil® 43031 solution is also used as the harder component in blends with other aliphatic Impranil® and Desmoderm® Finish products. view less | |
| Impranil® C | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® C is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. It has a viscosity at 23°C (30% in Ethylacetat gelöst) of 27,000-53,000 mPa·s. This product is suitable for for...view more Impranil® C is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. It has a viscosity at 23°C (30% in Ethylacetat gelöst) of 27,000-53,000 mPa·s. This product is suitable for formulating coatings with medium-hard handle for use in many different textile applications such as, protective clothing, sportswear, tarpaulins, awnings, fire hoses and sleeping bad undersides. This product has good adhesion, good resistance to hydrolysis, good weather stability, high abrasion resistance and resistance to dry cleaning. view less | |
| Impranil® C Solution | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® C Solution is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. This product has a viscosity at 23°C of 27,000-53,000 mPa·s, and a non-volatile content (0.9-1.1g / 1h...view more Impranil® C Solution is a polyester urethane adduct based on toluene diisocyanate that must be crosslinked by the addition of polyisocyanate before use. This product has a viscosity at 23°C of 27,000-53,000 mPa·s, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 30 ± 1%. It is suitable for formulating coatings with medium-hard handle for use in many different textil applications such as, covers for containers, light conveyer belts, camping articles and ironing board covers. This product offers good adhesions, resistance to dry cleaning, high abrasion resistant, good weather stability, and good resistance to hydrolysis. view less | |
| IMPRANIL® DAH | Covestro (formerly Bayer MaterialScience) 科思创 | An anionic, aromatic polyether-polyurethane dispersion used as a flexible tie coat applied by the transfer coating process in the manufacture of materials for outerwear, bags/luggage, shoes and athletic shoes. | |
| Impranil® DL 1380 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special propert...view more Impranil® DL 1380 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, bags/luggage, fashion she uppers, and shoe lining materials. Special properties include high flexibility, good lightfastness, high solid content, soft handle and is suitable for mechanical foaming. This product has a flow time at 23°C (4mmcup) < 90s, a pH values of 6-8, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) 57-61%. view less | |
| Impranil® DL 1537 | Covestro (formerly Bayer MaterialScience) 科思创 | Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include ve...view more Anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in different applications, such as outerwear, adhesion coats, technical articles, bags/luggage and flocked articles. Special properties include very good resistance to hydrolysis, good adhesion, high solid content, good stirring stability, soft handle and is suitable for mechanical foaming. This product has a pH values of 7 ± 1, a flow time at 23°C (4mmcup) of 15-60, and a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 57-61. view less | |
| Impranil® DLC-F | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLC-F is an ionic/anionic polycarbonate ester polyurethane dispersion, and is suitable for the formulation of textile coatings for use as finish and top coat in numerous applications, such as outerwear, upholstery, technical articles, fashion sh...view more Impranil® DLC-F is an ionic/anionic polycarbonate ester polyurethane dispersion, and is suitable for the formulation of textile coatings for use as finish and top coat in numerous applications, such as outerwear, upholstery, technical articles, fashion she uppers, and bags/luggage. This product has a very good resistance to hydrolysis, a good resistance to aging, high scratch resistance, high lightfastness, and high flexresistance. Impranil® DLC-F has a flow time at 23°C (4mmDINcup) of 30 ± 20s, a pH values of 7.5 ± 1.0, a non-volatile content (0.9-1.1g/ 1h / 125°C) of 40 ± 1%, and a density at 23°C of approx. 1.1g/cm^3. view less | |
| Impranil® DLH | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLH is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings and also for coating and finishing various technical articles. It is ideally used for outerwear, bags/luggage, fashion she lea...view more Impranil® DLH is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings and also for coating and finishing various technical articles. It is ideally used for outerwear, bags/luggage, fashion she leather uppers, belts and conveyer belts, hoses, glass fabrics, and fabrics made from synthetic fibers. This product is free from organic solvents and emulsifiers, has a high flexibility, is suitable for mechanical foaming, has high lightfastness, and high adhesion. Impranil® DLH has a non-volatile content (0.9–1.1g/1h/125°C) of 40 ± 1%, a pH value of 6.5 ± 1, and a flow time at 23°C (4mm DIN cup) of 27 ± 13%. view less | |
| Impranil® DLN W 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage....view more Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage. With a white low-viscosity dispersion in water and a solids content of approx. 50%, Impranil® DLN W 50 is suitable for the formulation of textile coatings for use in numerous applications. It has a high solids content, good lightfast, is suitable for mechanical foaming, and high flexibility. Impranil® DLN W 50 has a density at 23°C of 1.1g/cm^3, a pH value of 6.5 ± 1, a flow time at 23°C (4mm DIN cup) of ≤ 70s, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 50 ± 1%. view less | |
| Impranil® DLN-SD | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for m...view more Impranil® DLN-SD is an anionic aliphatic polyester-polyurethane dispersion that is suitable for the formulation of textile coatings for use in the numerous applications. Special properties include high flexibility, good lightfastness and is suitable for mechanical foaming. This product is ideally used for shoe lining materials, outerwear, bags/luggage, and fashion shoe uppers. Impranil® DLN-SD has a pH value of 6.5 ± 1.5, a flow time at 23°C (4mm DIN cup) of ≤ 70s, a density at 23°C of 1.1 g/cm^3, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 40 ± 1%. view less | |
| Impranil® DLP | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLP is an anionic aliphatic polyester-polyurethane dispersion that has a density at 23°C of 1.1g/cm^3, a flow time at 23°C (4mm DIN cup) of 35 ± 15s, a pH value of 7 ± 1, and a non-volatile content (0.9-1.1g/1h/125°C) of 50 ± 2%. It is suitable ...view more Impranil® DLP is an anionic aliphatic polyester-polyurethane dispersion that has a density at 23°C of 1.1g/cm^3, a flow time at 23°C (4mm DIN cup) of 35 ± 15s, a pH value of 7 ± 1, and a non-volatile content (0.9-1.1g/1h/125°C) of 50 ± 2%. It is suitable for the formulation of textile coatings for use in numerous applications, such as technical articles, flocked articles, bags/luggage, and outerwear. This product has very good resistance to hydrolysis, good adhesion, a high solids content, is suitable for mechanical foaming, has good lighfastness and a soft handle. view less | |
| Pergut® B 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® B 10 is a fine powder that can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. | |
| Pergut® B 20 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® B 20 is a fine powder that can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. It can also be used in abrasion-resistant concrete floor coatings and roadmarking paints. | |
| Pergut® S 10 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 10 is a chlorinated rubber used as the binder for anti-corrosion coatings. This product can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. | |
| Pergut® S 130 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 130 is a chlorinated rubber used as a binder for, among other things, adhesives. On account of its high polarity, Pergut® S 130 is especially suitable for the formulation of primers and key coats for rubber/metal bonds. | |
| Pergut® S 170 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 170 is a chlorinated rubber used as a binder for, among other things, adhesives. On account of its high polarity, Pergut® S 170 is especially suitable for the formulation of primers and key coats for rubber/metal bonds. | |
| Pergut® S 20 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 20 is a chlorinated rubber binder for, among other things, anticorrosion, concrete floor coatings and roadmaking paints. This product can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water...view more Pergut® S 20 is a chlorinated rubber binder for, among other things, anticorrosion, concrete floor coatings and roadmaking paints. This product can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. It can also be used in abrasion-resistant concrete floor coatings and roadmarking paints. view less | |
| Pergut® S 40 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 40 is a chlorinated rubber binder for anti-corrosion coatings. This product can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. Used as a combination binder, Pergut® S 40...view more Pergut® S 40 is a chlorinated rubber binder for anti-corrosion coatings. This product can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. Used as a combination binder, Pergut® S 40 improves drying properties and resistance to inorganic acids. view less | |
| Pergut® S 5 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 5 is a chlorinated rubber binder for anti-corrosion coatings and combination binder for e.g. alkyd resins, acrylates and ketone resins. This fine powder can be used to formulate fast-drying anticorrosion coatings with good weather stability and ...view more Pergut® S 5 is a chlorinated rubber binder for anti-corrosion coatings and combination binder for e.g. alkyd resins, acrylates and ketone resins. This fine powder can be used to formulate fast-drying anticorrosion coatings with good weather stability and resistance to water and chemicals. Used as a combination binder, Pergut® S 5 improves the initial adhesion and water repellency of the system. view less | |
| Pergut® S 90 | Covestro (formerly Bayer MaterialScience) 科思创 | Pergut® S 90 is a fully chlorinated olefinic polymer used as a binder for swimming pool and concrete coatings. It can be used to formulate fast-drying swimming pool and concrete coatings with good weather stability and resistance to water and chemicals. G...view more Pergut® S 90 is a fully chlorinated olefinic polymer used as a binder for swimming pool and concrete coatings. It can be used to formulate fast-drying swimming pool and concrete coatings with good weather stability and resistance to water and chemicals. Generally speaking, Pergut® S 90 has good compatibility with many solvents, plasticizers and binders. view less | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...view more Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. view less | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...view more Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. view less |
