| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...view more BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. view less | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...view more CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. view less | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...view more CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. view less | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...view more CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. view less | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...view more CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. view less | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...view more CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. view less | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...view more CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. view less | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...view more CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. view less | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...view more CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. view less | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less |  |
