| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...view more BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. view less | Request Sample |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...view more BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) view less | Request Sample |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | Request Sample |
| Benester 2580 | Benasedo | Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. so...view more Benester 2580 is used in high-yield coil-coating enamels with very good characteristics and adhesion on metals without primer. This product is a high aliphatic content with a blend of solvents. It contains 70% solids, a viscosity [G.H.] of Y-Z, an A.V. solids amount of 5-10, a colour [G.H.] maximum of 2, and an OH solids content of 0.9-1,1%. view less | Request Sample |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | Request Sample |
| Benester 46 | Benasedo | Benester 46 is a linear, saturated, slightly branched non yellowing Polyester resin. It is suggested for increasing the polyester systems flexibility. It is also suggested for baking primers and topcoats used in can and coil - coating fields. | Request Sample |
| BENESTER 5327 | Benasedo | BENESTER 5327 is a high – solids, slightly branched, saturated Polyester Resin. It is particularly suggested to increase flexibility of the polyesters resins in can and coil systems, crosslinked with amino-resins or blocked aliphatic polyisocyanates. | Request Sample |
| BENESTER 5918 | Benasedo | BENESTER 5918 is a slightly branched hydroxylated saturated polyester, endowed with very good adhesion and high–yield characteristics. It is suitable for concentraded pigment pastes due to its good wetting power. | Request Sample |
| Benester 602 | Benasedo | Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...view more Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. view less | Request Sample |
| Benester 694 | Benasedo | Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisoci...view more Benester 694 is a linear polyester with low hydroxyl value and high reactivity, endowed with good characteristics of adhesion and flexibility. It is employed in baking anticorrosive primers, crosslinked with amino-resins and/or blocked aliphatic polyisocianates, suitable for the coil-coating industry, where good mechanical performances are required. Benester 694 is also recommended for anticorrosive primers used in the Automotive industry. view less | Request Sample |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | Request Sample |
| Benester 839 | Benasedo | Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...view more Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less | Request Sample |
| Benester 896 | Benasedo | Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...view more Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less | Request Sample |
| Benester 910 | Benasedo | Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked ...view more Benester 910 is a saturated polyester, slightly branched, with high aliphatic content and low hydroxyl value. It is suitable for baking application, especially for the coil coating industry. It has to be to be crosslinked with amino-resins and/or blocked aliphatic polyisocyanates so to guarantee good adhesion on alluminium and glavanized steel, for high-gloss and flexible exterior top-coats. view less | Request Sample |
| BENESTER G22 | Benasedo | BENESTER G22 is a styrene free unsaturated polyester resins crosslinkable through “ Redox “ systems or UV lamps. It allows to obtain paints with very high gloss levels, hardness and similar pot life to the conventional ones diluted with Styrene. | Request Sample |
| Benester L 83 | Benasedo | Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [...view more Benester L 83 is used in coil-coating enamels for interior/exterior that are endowed with high flexibility, gloss, and colour retention. This product is slightly branched, an H.B. Naphta/ Butylglycol/ M.P.A., and a 60% solids content. It has a viscosity [G.H.] of Z-Z1, an A.V. solids amount of 2-6, and a color [G.H.] maximum of 3, and an OH solids amount of 1.0-1.2. view less | Request Sample |
| Benester LD 75 R in Isobutyl Acetate | Benasedo | Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate ve...view more Benester LD 75 R in Isobutyl Acetate is used in clear and pigmented sealers for wood. It provides clear finishes endowed with good brightness and high hardness. It can also be used in curing by U.V. or Redox and in tinting-pastes using isobutyl acetate version. This product has an 80% solids content, a viscosity [G.H.] of Z1-Z3, a colour [G.H.] maximum of 3, and an A.V. solids amount of 24-36. view less | Request Sample |
| Benester LD 75 R in Styrene | Benasedo | Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This ...view more Benester LD 75 R in Styrene is used in clear and pigmented sealers for wood that is easy-sanding and endowed with good brightness and high hardness. It is also used in curing by U.V. or Redox and in tinting-pastes using the isobutyl acetate version. This product has a viscosity [G.H.] of X-Y, an A.V. solids content of 24-36, a 75% solids amount, and a color [G.H.] maximum of 3. view less | Request Sample |
| Benester PZ 300 | Benasedo | Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component...view more Benester PZ 300 is an aliphatic linear, with 100% solids and 8-18 A.V. solids content. This product has a viscosity [G.H.] of V-X, a color [G.H.] maximum of 5, and an OH solids of 2.0-2.2%. Benester PZ 300 is used in plasticizer polymers for two-component polyurethane systems for metals, flexibilizing vehicles for can and coil-coating systems, and tinting pastes for plastics. view less | Request Sample |
| BENESTER T 76 | Benasedo | BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphat...view more BENESTER T 76 s a slightly branched saturated polyester, with good characteristics of hardness, flexibility, adhesion, brightness and colour retention. It is suitable for baking primers and enamels when crosslinked with amino-resins and/or blocked aliphatic polyisocyanates, used in can and coilcoating industry where post-formability is required. view less | Request Sample |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dispex® Ultra PX 4575 | BASF SE, Intermediates Division | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...view more Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. view less | |
| Epoben CO 74 | Benasedo | Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a vis...view more Epoben CO 74 is used in non-yellowing clear or pigmented baking finishes in combination with amino-resins. It has excellent adhesion, post-formability and chemical resistance. It is a 12-Hydroxy-stearic acid, with a 35% oil content. This product has a viscosity [G.H.] of X-Z, an A.V. solids amount of 0.5-1.5, and a colour [G.H.] maximum of 5. It has nitro applications. view less | Request Sample |
| Epoben R 403 in Solvesso 100 | Benasedo | Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers...view more Epoben R 403 in Solvesso 100 contains 60% solids, has a viscosity [G.H.] of Z3-Z5, an A.V. solids content of 0.5-1.5, and a colour [G.H.] maximum of 6. It has air and bake applications. Epoben R 403 in Solvesso 100 is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. view less | Request Sample |
| Epoben R 403 in Xylene | Benasedo | Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% soli...view more Epoben R 403 in Xylene is used in air-drying and baking primers and enamels for industrial applications with excellent adhesion, alkali and solvent-resistant properties. It can also be used in zinc-rich rust-inhibitive primers. This product has a 50% solids content, a viscosity [ G.H.] of T-V, an A.V. solids amount of 0.5-1.5, a color [G.H.] maximum of 6. It has bake and air applications. view less | Request Sample |
| EPOFEN 2319 | Benasedo | EPOFEN 2319 is typically used in packaging coating applications where a pre-formulated coating system is desired or in wash coat applications. | Request Sample |
| Epofen 254 | Benasedo | Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300...view more Epofen 254 is a clear binder, suggested for interior and exterior can coating AND paints endowed with excellent flexibility and very good chemical and solvent resistance. It is suitable for contact with food paints in compliance with U.S.A / F.D.A 175.300 and allows the formulators to produce pasteurization resistant varnishes. view less | Request Sample |
| EPOFEN W 1205 | Benasedo | EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food c...view more EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food contact paints only when the applied film is completely cross-linked and free of solvents, so that the content of extractable monomers becomes lower than the maximum allowed. view less | Request Sample |
| EPOSOL 7 | Benasedo | EPOSOL 7 is suitable for can coating and drum paints when properly combined with Phenolic and/or melamine binders. | Request Sample |
| EPOSOL 9 | Benasedo | EPOSOL 9 is endowed with very good flexibility hardness and chemical resistance properties. It should be in combination with Phenolic, Melamine or Polyamide binders. | Request Sample |
| EPOSOL AP 100 | Benasedo | EPOSOL AP 100 is a special additive improving the adhesion and the elasticity in baking enamel for metal substrates. It is stable in colour and doesn’t have any influence on weather resistance properties of the paints. | Request Sample |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hartben 405 | Benasedo | Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...view more Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. view less | Request Sample |
| Hartben 75 PS-T | Benasedo | Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75...view more Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75 P/ST allows to produce sealers and finishes for furniture, floors and metals, when a good yellowing resistance is not particularly requested. view less | Request Sample |
| Hartben A 75 | Benasedo | Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This pro...view more Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This product has a viscosity of D-I, a free monomer of < 0.5%, and NCO of 14.5-16.5, and a colour [G.H.] maximum of 1. view less | Request Sample |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...view more Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. view less | Request Sample |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...view more Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. view less | Request Sample |
| Hartben MC 53 | Benasedo | Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....view more Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. view less | Request Sample |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...view more Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. view less | Request Sample |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...view more Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating view less | |
| Idroben 130 | Benasedo | Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...view more Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. view less | Request Sample |
| Idroben 178 | Benasedo | Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 3...view more Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. view less | Request Sample |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...view more Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. view less | Request Sample |
| Idroben 201 | Benasedo | Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains ...view more Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH level of 7.0=8.0. This product has bake and air applications. view less | Request Sample |
| Idroben 202 | Benasedo | Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% sol...view more Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH level of 7.0-8.0. view less | Request Sample |
| IDROBEN 2026 | Benasedo | IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle f...view more IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle for primers and top-coats, when high mechanical properties are required, like the in can-coating field. view less | Request Sample |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...view more Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. view less | Request Sample |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | Request Sample |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...view more IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. view less | Request Sample |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...view more Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. view less | Request Sample |
| Idroben 4913 | Benasedo | Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This produ...view more Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH level of 8,0-8.5, a viscosity [Brookf.] m Pa.s of < 250, and an MFT of 0℃. view less | Request Sample |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...view more Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. view less | Request Sample |
| Idroben 828 | Benasedo | Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...view more Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. view less | Request Sample |
| Idroben 878 | Benasedo | Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (6...view more Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (60%) BG, a colour [G.H.] maximum, and an A.V. solids amount of 45-55. This product has bake applications. view less | Request Sample |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | Request Sample |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...view more Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. view less | Request Sample |
| IDROBEN PD 7051 | Benasedo | IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulat...view more IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulations. view less | Request Sample |
| IDROBEN PD 717 | Benasedo | IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plas...view more IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plastics (ABS.Polystyrene etc.), glass and metals, endowed with very good hardness, good resistance to organic solvents like gasoline and ethanol. view less | Request Sample |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...view more IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. view less | Request Sample |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...view more IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. view less | Request Sample |
| IDROBEN UV 737G | Benasedo | IDROBEN UV 737G shows good reactivity, balanced hardness and flexibility, matched with very good chemical and scratch resistance properties. The resin is characterized by very high gloss and body. It can be used in dual curing systems. | Request Sample |
| Idroben UV 747 | Benasedo | Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on w...view more Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on wood and MDF substartes and, in particolar cases, could be also used for metal. view less | Request Sample |
| Idroben UV 76 | Benasedo | Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be ...view more Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be cured under UV lamps. It also shows a very good yellowing resistance, so that it’s really suitable for white pigmented paints. Idroben UV 76 shows very good chemical resistances and could be also used for clear matte paints. view less | Request Sample |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...view more Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| ISOBEN 10 | Benasedo | ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss ...view more ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss and build up. view less | Request Sample |
| ISOBEN 11 | Benasedo | ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce...view more ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce wood coatings for frames or parquets. view less | Request Sample |
| ISOBEN 15 | Benasedo | ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended f...view more ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended for car refinishing, industrial and wood paints also for marine outdoor applications, combined with aliphatic isocyanates. view less | Request Sample |
| ISOBEN 168 | Benasedo | ISOBEN 168 is a high–solids non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. It is suggested for polyurethane lacquers for marine automotive industry, enamels for wood and metals with outdoor resistance. | Request Sample |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...view more ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . view less | Request Sample |
| ISOBEN 6 | Benasedo | ISOBEN 6 is a non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. In combination with aliphatic polyisocianates, provides films having very good gloss and colour retention. | Request Sample |
| ISOBEN 87 | Benasedo | ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain ...view more ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain high–quality enamels for metals, suitable both for interior and exterior applications. view less | Request Sample |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...view more N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. view less | |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...view more N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Ethylpyrrolidone, NEP | BASF SE, Intermediates Division | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| N-Methylethanolamine | BASF SE, Intermediates Division | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| N-Methylpyrrolidone, NMP | BASF SE, Intermediates Division | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less | |
| N-Vinyl-Caprolactam, NVC | BASF SE, Intermediates Division | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...view more N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. view less | |
| N-Vinyl-caprolactam (NVC) | BASF SE, Intermediates Division | N-Vinyl-caprolactam (NVC) is reactive diluent (monomer) for radiation curing. N-Vinyl-caprolactam is highly reactive for radical polymerization and offers excellent wetting and adhesion. | |
| N-Vinylpyrrolidone, NVP | BASF SE, Intermediates Division | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...view more N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. view less | |
| Neopentane diamine | BASF SE, Intermediates Division | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF SE, Intermediates Division | N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equ...view more N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equivalent weight, N,N'-Bis-(3-aminopropyl)-ethylene diamine enables high cross linking density. view less |
