| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...view more Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. view less | |
| Dynasylan® 1505 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification...view more Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the modification of polymers. view less | |
| Dynasylan® 2201 EQ | Evonik Operations GmbH, BL Silanes | Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g....view more Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.The dual nature of its reactivity allows Dynasylan® 2201 EQ to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic olymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 2201 EQ is a 50% solution of silane in methanol, is a colorless liquid with an alcohol-like odor and is soluble in alcohols, ketones, esters or aromatic hydrocarbons. Due to novel patented process, Dynasylan® 2201 EQ is the first ureidofunctional silane, which contains no carcinogenic by-products, e.g. ethylcarbamate. Dynasylan® 2201 EQ is therefore not classified as "carcinogenic, class 2". view less | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...view more Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. view less | |
| Dynasylan® 4144 | Evonik Operations GmbH, BL Silanes | Dynasylan ® 4144 helps to control rheological properties and to reduce viscosity in highly filled polymer systems, like aluminum trihydroxide filled polyesters or SMC pastes. Contrary to most other organofunctional silanes, Dynasylan® 4144 features che...view more Dynasylan ® 4144 helps to control rheological properties and to reduce viscosity in highly filled polymer systems, like aluminum trihydroxide filled polyesters or SMC pastes. Contrary to most other organofunctional silanes, Dynasylan® 4144 features chemical polarity yet remaining chemically not reactive. A of such the product is used as a hydrophilic compatibilizer rather than a covalent adhesion promoter. Dynasylan® 4144 permits workable viscosities at well over 250 phr aluminum trihydroxide loading in unsaturated polyester resins. Further more, Dynasylan® 4144 can be used as anti-settling agent for corrosion inhibitors in glycol based cooling agents. As a non-coupling silane Dynasylan® 4144 can also be used as a slipping agent to simply modify a surface. view less | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...view more Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. view less | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...view more Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Dynasylan® 6498 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. k...view more Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colourless, nearly odorless low viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6498, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is significantly reduced compared to monomeric vinyl silanes. view less | |
| Dynasylan® 6598 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. It is a colourless, nearly odorless low viscosity liquid. This product is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organi...view more Dynasylan® 6598 is an oligomeric siloxane containing vinyl, propyl and ethoxy groups. It is a colourless, nearly odorless low viscosity liquid. This product is an excellent silane compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (EPDM, EVA, PE). The application of Dynasylan® 6598 in mineral filled and peroxide crosslinked cable systems results in improved mechanical and electrical properties, especially upon exposure to moisture. The high boiling start of Dynasylan® 6598, together with its high flash point, gives it several advantages over monomeric silanes with respect to safety, handling and processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis ethanol (VOC) is considerably less than for monomeric silanes. view less | |
| Dynasylan® 9116 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane, that can be used as a surface modifier to generate strong hydrophobicity and lipophilicity on inorganic fillers and pigments. The long-chain alkyl functionality results in unique compound p...view more Dynasylan® 9116 is a monomeric long-chain alkylfunctional silane, that can be used as a surface modifier to generate strong hydrophobicity and lipophilicity on inorganic fillers and pigments. The long-chain alkyl functionality results in unique compound properties (better dispersion, high filler loadings, reduced water uptake) when Dynasylan® 9116 treated fillers or pigments are incorporated into non-polar polymers, waxes or oils. view less | |
| Dynasylan® 9165 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9165 is a phenylfunctional silane that exhibits excellent thermal stability and brings flexibility to sol-gel coating systems. | |
| Dynasylan® 9265 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9265 is a phenylfunctional silane that exhibits excellent thermal stability and brings flexibility to sol-gel coating systems. | |
| Dynasylan® 9896 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9896 is an oligomeric short-chain alkylfunctional silane. It is soluble in common organic solvents. | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...view more Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. view less | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic ca...view more Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. view less | |
| DYNASYLAN® F 8261 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8261 is a bifunctional silane possessing hydrolyzable inorganic ethoxysilyl groups and a fluoroalkyl chain, that imparts simultaneously excellent lipophobicity and outstanding hydrophobicity. Dynasylan® F 8261 acts as a surface modifier on mo...view more Dynasylan® F 8261 is a bifunctional silane possessing hydrolyzable inorganic ethoxysilyl groups and a fluoroalkyl chain, that imparts simultaneously excellent lipophobicity and outstanding hydrophobicity. Dynasylan® F 8261 acts as a surface modifier on mostly hydroxyfunctional substrates (e.g. inorganic fillers and pigments). view less | |
| Dynasylan® F 8263 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8263 acts as an oleophobic agent to modify carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). | |
| Dynasylan® F 8815 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as an oleophobic surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic or natural fibers like cotton or leather. | |
| Dynasylan® HMDS | Evonik Operations GmbH, BL Silanes | Dynasylan® HMDS is a hydrophobizing agent for surface modification. It can also be used to modify polymers. | |
| Dynasylan® HYDROSIL 1151 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL ...view more Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water. view less | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...view more Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. view less | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® HYDROSIL 2775 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2775 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2776 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2776 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| DYNASYLAN® HYDROSIL 2926 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2926 is a water-borne inorganic binder for high temperature inorganic coatings. | |
| Dynasylan® M | Evonik Operations GmbH, BL Silanes | Dynasylan® M, the methyl ester of orthosilicic acid, is frequently also referred to under the name of TMOS (tetramethoxysilane). Dynasylan® M is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® MKS | Evonik Operations GmbH, BL Silanes | Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence o...view more Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence of moisture. Dynasylan® MKS is a binder with superior anti-settling properties. Paints formulated with Dynasylan® MKS can easily be stirred-up even after longer storage times. After processing, the coating will cure in the presence of atmospheric moisture. Overcoating with conventional topcoat systems is facile. Zinc dust paints based on Dynasylan® MKS provide effective protection of steel against corrosion in aggressive industrial and coastal environments at elevated temperatures (up to 420 °C) in the presence of chemicals. view less | |
| Dynasylan® MTES | Evonik Operations GmbH, BL Silanes | Dynasylan® MTES is a monomeric alkylfunctional silane, possessing hydrolyzable inorganic ethoxysilyl groups and an alkyl group, that imparts hydrophobicity by the surface treatment of fillers and/or pigments. Acid or alkaline hydrolysis leads to the form...view more Dynasylan® MTES is a monomeric alkylfunctional silane, possessing hydrolyzable inorganic ethoxysilyl groups and an alkyl group, that imparts hydrophobicity by the surface treatment of fillers and/or pigments. Acid or alkaline hydrolysis leads to the formation of silanol groups which, in a subsequent condensation reaction, can both react with the active hydroxy-groups present on the surface of an inorganic filler or pigment and can also condensate with other silanol groups to form very stable siloxane bonds (-Si-O-Si-). view less | |
| Dynasylan® MTMS | Evonik Operations GmbH, BL Silanes | Dynasylan® MTMS, an alkyltrialkoxysilane, is an important monomer for use in sol-gel systems. | |
| Dynasylan® OCTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® OCTMO is commonly used as a hydrophobic surface modifier for fillers and pigments. | |
| Dynasylan® PTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTEO, an alkyltrialkoxysilane, is an important monomer for use in sol-gel systems. | |
| Dynasylan® PTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTMO, an alkyltrialkoxysilane, is an important monomer for use in sol-gel systems. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...view more Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. view less | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...view more Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. view less | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...view more Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. view less | |
| Dynasylan® SILBOND® Condensed | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder fo...view more Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. view less | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...view more Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. view less | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...view more Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. view less | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...view more Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. view less | |
| Dynasylan® SILBOND® PURE | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol...view more Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. view less | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| Dynasylan® SIVO 111 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 111 resembles an alkaline neutralization agent which is suitable for adjusting the pH of Dynasylan® SIVO 110. | |
| Dynasylan® SIVO 112 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 112 is a hydro- and oleophobic additive for Dynasylan® SIVO 110. | |
| Dynasylan® SIVO 113 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 113 is a hydrophobizing additive for Dynasylan® SIVO 110. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Dynasylan® SIVO 140 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations bas...view more Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations based on Dynasylan® SIVO 140 cure at room temperature. view less | |
| Dynasylan® SIVO 160 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major b...view more Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major breakthrough for water-borne sol-gel systems. view less | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...view more Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® SIVO 214 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 214 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). | |
| Dynasylan® SIVO CLEAR EC | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO CLEAR EC is an one-component user-friendly coating system for easy-to-clean coatings on smooth surfaces such as glass and glazed ceramic. | |
| Dynasylan® SIVO CLEAR SET K1 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO CLEAR K1 is a user-friendly 2-component coating system for easy-to clean coatings on smooth surfaces such as glass. | |
| Dynasylan® SIVO CLEAR SET K2 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO CLEAR K2 is a user-friendly 2-component coating system for easy-to clean coatings on smooth surfaces such as glass. | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...view more Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). view less | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon 45/75 AET 2K-PU saturated polyester | Galstaff Multiresine S.p.A. | Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening. | |
| Ftalon TAC | Galstaff Multiresine S.p.A. | Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...view more Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. view less | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...view more Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. view less | |
| HC-Poloral P 100/S | Galstaff Multiresine S.p.A. | HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...view more HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. view less | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...view more Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). view less | |
| Italester 218 SND | Galstaff Multiresine S.p.A. | Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...view more Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). view less | |
| Italester H27 | Galstaff Multiresine S.p.A. | Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...view more Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. view less | |
| Italester MX 353 | Galstaff Multiresine S.p.A. | Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...view more Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. view less | |
| Italkid 268 | Galstaff Multiresine S.p.A. | Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...view more Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. view less | |
| Italkid 312 F | Galstaff Multiresine S.p.A. | Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...view more Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). view less | |
| Italkid F 51 P | Galstaff Multiresine S.p.A. | Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability. | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...view more Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. view less | |
| Italkid MR 950 | Galstaff Multiresine S.p.A. | Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...view more Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. view less | |
| Itamin BG 142 | Galstaff Multiresine S.p.A. | Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...view more Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. view less | |
| Itamin M 172 | Galstaff Multiresine S.p.A. | Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...view more Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. view less | |
| Itamin U 34 | Galstaff Multiresine S.p.A. | Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...view more Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. view less | |
| Itamin URP 91 | Galstaff Multiresine S.p.A. | Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...view more Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. view less | |
| Poloral G 650 | Galstaff Multiresine S.p.A. | Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...view more Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. view less | |
| Poloral K 128 | Galstaff Multiresine S.p.A. | Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...view more Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. view less | |
| Poloral UV 92/85 ABT | Galstaff Multiresine S.p.A. | Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...view more Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. view less | |
| Sintal A 213 | Galstaff Multiresine S.p.A. | Sintal A 213 is an alkyd resin used for the formulation of high solid stoving enamels thanks to it's easy thinning. It can be used in combination with Sintal R 254 to have better flexibility and can also be used for clear or pigmented nitro systems. | |
| Sintal G 63/70 RM | Galstaff Multiresine S.p.A. | Sintal G 63/70 RM is largely used to prepare white enamels for buildings. This product shows an excellent yellowing resistance. For indoor use, it is often mixed with Sintal S50/50 RM to improve dust-free (30'-40') and hardening speed. | |
| Sintal L45/60 X | Galstaff Multiresine S.p.A. | Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for w...view more Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for white or light color. view less | |
| Sintal R 05/60X | Galstaff Multiresine S.p.A. | Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good...view more Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good solvents resistance. clear nitro sanding sealers for wood, colorants and inks for wood. view less | |
| Sintal S 380/60 T | Galstaff Multiresine S.p.A. | Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for st...view more Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for stoving materials in combination with urea or melamine resins. view less | |
| Syncryl 104 | Galstaff Multiresine S.p.A. | Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combinatio...view more Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combination with other UV resins or acrylic monomers. view less | |
| Syncryl DPGDA | Galstaff Multiresine S.p.A. | Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electro...view more Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electronics, photopolymers, inks and paints. Syncryl DPGDA provides low volatility, flexibility, adhesion, hardness and weatherability, water abrasion chemical and weather resistance. view less | |
| Syncryl GPTA | Galstaff Multiresine S.p.A. | Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast ...view more Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast surface curing, low shrinkage, flexibility, adhesion, weatherability, water, chemical and abrasion resistance. view less | |
| Syncryl TMPEOTA | Galstaff Multiresine S.p.A. | Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating system...view more Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating systems. view less | |
| Synteven 052 | Galstaff Multiresine S.p.A. | Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated po...view more Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated polyesters to formulate two pack polyurethane coatings with very high flexibility for wood ,metal and plastics support. Is necessary in combination with isocynate, to have a good dry film, greatly overcrosslinked. view less | |
| Synteven 713 R | Galstaff Multiresine S.p.A. | Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non highe...view more Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non higher then 10%,to avoid the presece of the micro bubbles in the film. Synteven 713 R is used to formulate high solids, clear and pigmented, coatings for wood and furniture monomer free, cured by conventional Hydroperoxide/Co. The films have very good air-releasing. view less | |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...view more Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. view less | |
| Synteven 9013 XA | Galstaff Multiresine S.p.A. | Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life...view more Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life also in combination with aromatic polyisocianate. Synteven 9013 XA is used in the formulation of air drying two-pack coatings. view less | |
| Synteven P3 GA-707 | Galstaff Multiresine S.p.A. | Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films...view more Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films are hard and resistant to scratching, chemicals and very good sandability. This product is used in the formulation of clear or pigmented coats for wood and furniture. The coating can be cured by conventional methods or U.V radiation. view less | |
| Uronal B 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also ...view more Uronal B 55/50 ABT is a low viscosity aromatic isocyanurate suitable for PU wood coatings with long pot-life, flexibility, reactivity and hardness. It can be used alone or with Ftalon resins or mixed with other Uronal products. Uronal B 55/50 ABT is also suitable for matt finishes with excellent flowing and good matting agents compatibility. view less | |
| Uronal RA 55/50 ABT | Galstaff Multiresine S.p.A. | Uronal RA 55/50 ABT is an aromatic isocianurate for PU coatings with high reactivity and more flexible than Uronal RA 50/50 ABT. It is suitable for fast drying PU coatings for wood in combination with the polyols (Ftalon). |
