| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...view more STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. view less | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...view more STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. view less | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...view more STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. view less | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...view more STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. view less | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. view less | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. view less | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. view less | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. view less | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. view less | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...view more STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. view less | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. view less | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...view more STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. view less | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...view more STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. view less | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...view more STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. view less | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...view more STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...view more STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. view less | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...view more STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...view more STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...view more STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...view more STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...view more STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...view more STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...view more STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...view more STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. view less | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...view more STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. view less | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...view more STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) view less | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...view more STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...view more STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. view less | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...view more STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...view more STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...view more STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. view less | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...view more STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...view more STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. view less | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...view more STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...view more STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. view less | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...view more STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. view less | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...view more STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...view more STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. view less | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...view more STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. view less | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...view more STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. view less | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...view more STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...view more STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. view less | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...view more STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...view more STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. view less | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. view less | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...view more STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. view less | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...view more STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...view more STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...view more STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...view more STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...view more STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. view less | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...view more STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver 3891 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property....view more STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property. STANLUX® Silver 3891 has an average particle size of 11 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R2970 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Sil...view more STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Silver R2970 has an average particle size of 32 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3270 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an av...view more STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an average particle size of 25 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3370 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an ave...view more STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an ave...view more STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3670 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an ave...view more STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 ha...view more STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R3870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has ...view more STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4100 has an average particle size of 64 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4112 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4112 has an average particle size of 45 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4114 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metal...view more STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4114 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4200 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4400 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4400 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4400 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® SIlver R4500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...view more STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4500 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...view more STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4700 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...view more STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4800 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R4850 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metalli...view more STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4850 has an average particle size of 15 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R6200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an...view more STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R6300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver...view more STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6300 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver R6400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for...view more STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6400 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...view more STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7100 has an average particle size of 34 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...view more STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7200 has an average particle size of 33 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...view more STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7300 has an average particle size of 30 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7450 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...view more STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7450 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...view more STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7500 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® Silver SD7700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance sys...view more STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7700 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. view less | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...view more STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. view less | |
| TRONOX® 8300 | Tronox | TRONOX® 8300 is a titanium dioxide pigment for white rigid PVC applications. It increases throughput, reduces the frequency of screen changes, lower lubricant levels, and reduces the need for toners and brighteners. With a bright white color, high tint st...view more TRONOX® 8300 is a titanium dioxide pigment for white rigid PVC applications. It increases throughput, reduces the frequency of screen changes, lower lubricant levels, and reduces the need for toners and brighteners. With a bright white color, high tint strength and a cool blue undertone, TRONOX® 8300 offers unparalleled visual appeal to consumers. Improved flow, superior dispersibility and true compatibility with most stabilizer systems are just some of the many exeptional attributes of this product. view less | |
| TRONOX® 8400 | Tronox | TRONOX® 8400 is a titanium dioxide pigment for polyolefin applications. It offers improved performance under hotter, thinner and faster process conditions and offers unrivaled efficiency improvements. This enhanced performance has been demonstrated on a c...view more TRONOX® 8400 is a titanium dioxide pigment for polyolefin applications. It offers improved performance under hotter, thinner and faster process conditions and offers unrivaled efficiency improvements. This enhanced performance has been demonstrated on a commercial basis, and TRONOX® 8400 now is available for customers who want to gain a competitive advantage through processing improvements. view less | |
| TRONOX® 8810 | Tronox | TRONOX® 8810 is a titanium dioxide pigment for polyolefin applications. It provides many distinct advantages to the polymer processor, including superb dry flow characteristics and low dusting. Excellent pigment dispersion, outstanding thermal stability, ...view more TRONOX® 8810 is a titanium dioxide pigment for polyolefin applications. It provides many distinct advantages to the polymer processor, including superb dry flow characteristics and low dusting. Excellent pigment dispersion, outstanding thermal stability, and superior optical properties are other assets of TRONOX® 8810. This product is recommended for polyolefin color concentrates and thin film applications, as well as rigid and flexible PVC products. view less | |
| TRONOX® 8870 | Tronox | TRONOX® 8870 is a titanium dioxide pigment for engineering plastics applications. It provides many distinct advantages to processors of Engineering Thermoplastics, including superb dry flow characteristics and excellent wet out properties. Resistance to h...view more TRONOX® 8870 is a titanium dioxide pigment for engineering plastics applications. It provides many distinct advantages to processors of Engineering Thermoplastics, including superb dry flow characteristics and excellent wet out properties. Resistance to hydrolysis, outstanding thermal stability, and superior optical performance are other assets of TRONOX® 8870. This product maintains a crisp, clean blue undertone to provide the expected aesthetics. view less | |
| TRONOX® CR-470 | Tronox | TRONOX® CR-470 is a titanium dioxide pigment for ABS applications, where improved performance under a wide spectrum of conditions is necessary to maintain mechanical integrity, color stability, and aesthetic appearance in the final ABS product. TRONOX® CR...view more TRONOX® CR-470 is a titanium dioxide pigment for ABS applications, where improved performance under a wide spectrum of conditions is necessary to maintain mechanical integrity, color stability, and aesthetic appearance in the final ABS product. TRONOX® CR-470 meets these needs and offers unrivalled improvements in optical properties and thermal stability in ABS applications. view less | |
| TRONOX® CR-813 | Tronox | TRONOX® CR-813 offers outstanding brightness, high tinting strength, and opacity in both water and solvent based flat finishes. Applications include flat architectural coatings, solvent and water based coatings and low gloss flexographic inks. | |
| TRONOX® CR-813S | Tronox | TRONOX® CR-813S is the water-based slurry version of CR-813. CR-813S offers outstanding brightness, high tint strength, and high opacity in flat water-based architectural coatings. It is recommended for flat interior water-based architectural coatings. | |
| TRONOX® CR-822 | Tronox | TRONOX® CR-822 combines high durability, gloss retention, and chalk resistance in exterior applications with excellent optical properties. The blue tint tone and high durability of CR-822 make it an excellent choice for coatings and plastic applications. ...view more TRONOX® CR-822 combines high durability, gloss retention, and chalk resistance in exterior applications with excellent optical properties. The blue tint tone and high durability of CR-822 make it an excellent choice for coatings and plastic applications. Other ideal applications include interior and exterior industrial coatings, powder coatings, coil finishes, marine finishes, composite decking, etc. view less | |
| TRONOX® CR-826 | Tronox | TRONOX® CR-826 is a universal product which combines very high durability, gloss retention and chalk resistance in exterior applications with excellent optical performance. The combination of high tint strength and outstanding durability makes this produc...view more TRONOX® CR-826 is a universal product which combines very high durability, gloss retention and chalk resistance in exterior applications with excellent optical performance. The combination of high tint strength and outstanding durability makes this product an excellent choice for both coatings and plastic applications. view less | |
| TRONOX® CR-826S | Tronox | TRONOX® CR-826S is the water-based slurry version of CR-826 that combines very high durability, gloss retention and chalk resistance in exterior applications with excellent optical properties. The combination of high tint strength and durability makes thi...view more TRONOX® CR-826S is the water-based slurry version of CR-826 that combines very high durability, gloss retention and chalk resistance in exterior applications with excellent optical properties. The combination of high tint strength and durability makes this product an excellent choice for both interior and exterior water-based architectural coatings. view less |
