| Eastman Advantis™ 510W | Eastman Chemical B.V. | Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blen...Vea Mas Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blend-in resin in waterborne primers and waterborne basecoats for automotive bumper applications. Eastman Advantis™ 510W can also be used as a wash primer and is suitable as an adhesion promoter for applications beyond automotive. Eastman Advantis™ 510W provides excellent adhesion on non-flame treated EPDM rubber modified polypropylene substrates. Vea Menos | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-381-0.1) | Eastman Chemical B.V. | A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will...Vea Mas A cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder. Vea Menos | |
| Eastman™ Cellulose Acetate Butyrate (CAB-531-1) | Eastman Chemical B.V. | Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resi...Vea Mas Eastman™ Cellulose Acetate Butyrate (CAB-531-1) is a cellulose ester. This product has tough films with good resistance to marring. Weathering is possible with this product through combinations of cellulose acetate butyrate with thermoplastic acrylic resins. Eastman™ CAB-531-1 esters are soluble in a wide range of solvents. It is a flexible resin requiring lower plasticizer modification. Eastman™ CAB-531-1 is used for food contact applications, nail care, and coatings for automotive plastics. Vea Menos | |
| EASTMAN CELLULOSE ACETATE BUTYRATE (CAB-553-0.4) | Eastman Chemical B.V. | Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is rea...Vea Mas Soluble in low molecular weight alcohols (methanol, ethanol, isopropanol, and n-propanol) as well as other common organic solvents. It has a high hydroxyl content (4.8 wt. %, average), which contributes to its alcohol solubility. The hydroxyl group is reactive and may be crosslinked with ureaformaldehydes, melamines, and polyisocyantes. Films of CAB-553-0.4 are colorless and have good ultraviolet stability, maintaining their low color over long periods of time. Vea Menos | |
| EASTMAN CELLULOSE ACETATE (CA-398-3) | Eastman Chemical B.V. | One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solv...Vea Mas One of the lower viscosity solution grades of cellulose acetate. The average ASTM viscosity of CA-398-3 is 3 seconds. Eastman Cellulose Acetate (CA-398-3) is supplied in the form of a fine, dry, free-flowing powder. It may be blended with appropriate solvents, plasticizers, and other modifying resins to formulate coatings for paper, glass, plastic, wire screen, and electrical wiring. Vea Menos | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-482-0.5) | Eastman Chemical B.V. | A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed ...Vea Mas A low-odor, free-flowing powder. It is especially adaptable for use in printing inks and clear overprint varnishes because of its wide solubility in ink solvents, compatibility with other resins used in printing inks, and high melting point. Films formed from Eastman CAP-482-0.5 have fast solvent release, excellent antiblocking properties, and grease resistance superior to that of other film-formers. Vea Menos | |
| EASTMAN CELLULOSE ACETATE PROPIONATE (CAP-504-0.2) | Eastman Chemical B.V. | A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV li...Vea Mas A free-flowing powder having low odor, low color, and high hydroxyl content. It is fast dissolving, has good water tolerance and resistance to souring, and is compatible with many ink resins and solvents. It has good resistance to discoloration from UV light and has good adhesion to plastics. It has a low viscosity (0.2 seconds) and has an approximate propionyl content of 42.5 wt%. Vea Menos | |
| Eastman Solus™ 2100 | Eastman Chemical B.V. | Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sandi...Vea Mas Eastman Solus™ 2100 is a dry, free-flowing powder convenient to handle. It is soluble in a wide range of solvents and compatible in most high solids coatings systems. Eastman Solus™ 2100 is used in automotive refinishing. This product offers ease of sanding, excellent anti-sag behavior, faster dry to touch time, improved gloss, and wider window of polishability. Vea Menos | |
| Eastman Texanol™ Ester Alcohol | Eastman Chemical B.V. | Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film inte...Vea Mas Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film integrity at low levels of coalescent, enhancing the performance properties of the paint including low temperature coalescence, touch-up, scrub resistance, washability, color development, thermal flexibility, and resistance to mudcracking. Eastman Texanol™ ester alcohol also enhances thickening efficiency when used with associative thickeners. Vea Menos | |
| Geocrystal® 110 004 x 004 x 001 | Geotech International B.V. | Geocrystal® 110 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact t...Vea Mas Geocrystal® 110 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been coated. Every single glitter has an edge of exposed coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting the coating may react with the exposed edges and may cause bleeding of the colourant when applicable. Vea Menos | |
| Geocrystal® B/G 006 X 006 x 001 | Geotech International B.V. | Geocrystal® B/G 006 X 006 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact t...Vea Mas Geocrystal® B/G 006 X 006 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been coated. Every single glitter has an edge of exposed coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting the coating may react with the exposed edges and may cause bleeding of the colourant when applicable. Vea Menos | |
| Geocrystal® Multi 015 HEX x 001 | Geotech International B.V. | Geocrystal® Multi 015 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact t...Vea Mas Geocrystal® Multi 015 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geocrystal® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been coated. Every single glitter has an edge of exposed coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting the coating may react with the exposed edges and may cause bleeding of the colourant when applicable. Vea Menos | |
| Geodiamond® Fuchsia L | Geotech International B.V. | Geodiamond® Fuchsia L is an off-white free flowing powder with a fuchsia reflection. It consists of platelets of glass coated with titanium dioxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without g...Vea Mas Geodiamond® Fuchsia L is an off-white free flowing powder with a fuchsia reflection. It consists of platelets of glass coated with titanium dioxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geodiamond® Red L | Geotech International B.V. | Geodiamond® Red L is an off-white free flowing powder with a red reflection. It consists of platelets of glass coated with titanium dioxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding....Vea Mas Geodiamond® Red L is an off-white free flowing powder with a red reflection. It consists of platelets of glass coated with titanium dioxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geodiamond® Silver Ag S | Geotech International B.V. | Geodiamond® Silver Ag S is silver coated glass flakes, coated with silver. It is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding. They can be added to the powder system while stirring after millin...Vea Mas Geodiamond® Silver Ag S is silver coated glass flakes, coated with silver. It is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geodiamond® Super Red Gold L | Geotech International B.V. | Geodiamond® Super Red Gold L is a red gold free flowing powder. It consists of platelets of glass coated with titanium dioxide and iron oxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grindin...Vea Mas Geodiamond® Super Red Gold L is a red gold free flowing powder. It consists of platelets of glass coated with titanium dioxide and iron oxide, and is ideal for use in industrial applications. Geodiamond® borosilicate pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geoglit® Navy 008 HEX | Geotech International B.V. | Geoglit® Navy 008 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut a...Vea Mas Geoglit® Navy 008 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoglit® Purple 004 HEX | Geotech International B.V. | Geoglit® Purple 004 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut...Vea Mas Geoglit® Purple 004 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoglit® Silver 004 HEX x 0005 | Geotech International B.V. | Geoglit® Silver 004 HEX x 0005 is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film...Vea Mas Geoglit® Silver 004 HEX x 0005 is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoglit® Silver 025 HEX | Geotech International B.V. | Geoglit® Silver 025 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut...Vea Mas Geoglit® Silver 025 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoglit® Silver 062 HEX | Geotech International B.V. | Geoglit® Silver 062 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut...Vea Mas Geoglit® Silver 062 HEX is made of precision cut polyester flakes and is ideal for industrial applications. Geoglit® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geopearl® Blue I WR | Geotech International B.V. | Geopearl® Blue I WR is an off-white free flowing powder with a blue reflection. It consists of platelets of mica coated with titanium dioxide and cerium oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well...Vea Mas Geopearl® Blue I WR is an off-white free flowing powder with a blue reflection. It consists of platelets of mica coated with titanium dioxide and cerium oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® Bright Bronze I | Geotech International B.V. | Geopearl® Bright Bronze I is a yellowish brown free flowing powder of platelets of mica coated with iron oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powd...Vea Mas Geopearl® Bright Bronze I is a yellowish brown free flowing powder of platelets of mica coated with iron oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® Bright Gold I | Geotech International B.V. | Geopearl® Bright Gold I is an off-white free flowing powder with a gold reflection. It consists of platelets of mica coated with titanium dioxide and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grind...Vea Mas Geopearl® Bright Gold I is an off-white free flowing powder with a gold reflection. It consists of platelets of mica coated with titanium dioxide and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® Crystal Bright Violet | Geotech International B.V. | Geopearl® Crystal Bright Violet is an off-white free flowing powder with a violet reflection. It consists of platelets of synthetic mica coated with titanium dioxide and is ideal for use in industrial applications. Geopearl® Crystal pearlescent pigments d...Vea Mas Geopearl® Crystal Bright Violet is an off-white free flowing powder with a violet reflection. It consists of platelets of synthetic mica coated with titanium dioxide and is ideal for use in industrial applications. Geopearl® Crystal pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® Crystal Glittering Icy White | Geotech International B.V. | Geopearl® Crystal Glittering Icy White is an off-white free flowing powder with a pearly reflection. It consists of platelets of synthetic mica coated with silica and titanium dioxide and is ideal for use in industrial applications. Geopearl® Crystal pear...Vea Mas Geopearl® Crystal Glittering Icy White is an off-white free flowing powder with a pearly reflection. It consists of platelets of synthetic mica coated with silica and titanium dioxide and is ideal for use in industrial applications. Geopearl® Crystal pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® Crystal Silver | Geotech International B.V. | Geopearl® Crystal Silver is an off-white free flowing powder with a pearly reflection. It consists of platelets of synthetic mica coated with titanium dioxide, and is ideal for use in industrial applications. Geopearl® Crystal pearlescent pigments dispers...Vea Mas Geopearl® Crystal Silver is an off-white free flowing powder with a pearly reflection. It consists of platelets of synthetic mica coated with titanium dioxide, and is ideal for use in industrial applications. Geopearl® Crystal pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geopearl® CT Red to Gold | Geotech International B.V. | Geopearl® CT Red to Gold is a free flowing powder of platelets of mica coated with silica and iron oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powder sys...Vea Mas Geopearl® CT Red to Gold is a free flowing powder of platelets of mica coated with silica and iron oxide, and is ideal for use in industrial applications. Geopearl® I pearlescent pigments disperse well without grinding. They can be added to the powder system while stirring after milling of the organic/inorganic pigments and before the binder is added. Vea Menos | |
| Geoshine® Apple Red 004 x 004 x 001 | Geotech International B.V. | Geoshine® Apple Red 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact...Vea Mas Geoshine® Apple Red 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoshine® Aquamarine 015 HEX x 001 | Geotech International B.V. | Geoshine® Aquamarine 015 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact ...Vea Mas Geoshine® Aquamarine 015 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoshine® Bright Silver 002 x 002 x 0005 | Geotech International B.V. | Geoshine® Bright Silver 002 x 002 x 0005 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the...Vea Mas Geoshine® Bright Silver 002 x 002 x 0005 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geoshine® Silver AG 004 HEX x 001 | Geotech International B.V. | Geoshine® Silver AG 004 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact t...Vea Mas Geoshine® Silver AG 004 HEX x 001 is made of precision cut polyester flakes, and is ideal for use in industrial applications. Geoshine® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geospectra® Copper 008 HEX x 002 | Geotech International B.V. | Geospectra® Copper 008 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact th...Vea Mas Geospectra® Copper 008 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geospectra® Lavender 004 x 004 x 001 | Geotech International B.V. | Geospectra® Lavender 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fac...Vea Mas Geospectra® Lavender 004 x 004 x 001 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geospectra® Ocean Spray 040 HEX x 002 | Geotech International B.V. | Geospectra® Ocean Spray 040 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fa...Vea Mas Geospectra® Ocean Spray 040 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geospectra® Stratosphere 006 x 006 x 002 | Geotech International B.V. | Geospectra® Stratosphere 006 x 006 x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the...Vea Mas Geospectra® Stratosphere 006 x 006 x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Geospectra® Stratosphere 040 HEX x 002 | Geotech International B.V. | Geospectra® Stratosphere 040 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the f...Vea Mas Geospectra® Stratosphere 040 HEX x 002 is made of precision cut polyester flakes, and is ideal for use in industry applications. Geospectra® industrial glitter products are made of coated polyester glitter flakes. Glitter is an ‘open’ product due to the fact that the film is cut after it has been aluminized and coated. Every single glitter has an edge of exposed aluminium and coating which is created when the particles are cut from the film. For this reason caustics and all chemicals normally affecting pure aluminium and/or coating may react with the exposed edges. Vea Menos | |
| Metalloy® L2 | Geotech International B.V. | Metalloy® L2 is a leafing aluminium paste for the coatings industry. Metalloy® effect pigments for industrial use are aluminium based pigments offering metallic effects. The range of Metalloy® products can be divided into non-leafing and leafing products....Vea Mas Metalloy® L2 is a leafing aluminium paste for the coatings industry. Metalloy® effect pigments for industrial use are aluminium based pigments offering metallic effects. The range of Metalloy® products can be divided into non-leafing and leafing products. Leafing aluminium flakes float and align at, or near the surface of the film, creating an opaque coating with silver or chrome effect. Leafing pigments form Metalloy® pigments can be combined with other effect pigments and colorants such as pearlescents and organic pigments. Vea Menos | |
| Metalloy® NL2 | Geotech International B.V. | Metalloy® NL2 is a non-leafing aluminium paste for the coatings industry. Metalloy® effect pigments for industrial use are aluminium based pigments offering metallic effects. The range of Metalloy® products can be divided into non-leafing and leafing prod...Vea Mas Metalloy® NL2 is a non-leafing aluminium paste for the coatings industry. Metalloy® effect pigments for industrial use are aluminium based pigments offering metallic effects. The range of Metalloy® products can be divided into non-leafing and leafing products. Non-leafing aluminium flakes are evenly distributed throughout the coating film. This structure allows the light to be reflected by the flakes and emitted out. Vea Menos |
