| 12-Hydroxy Stearic Acid (12-HSA) | Castor International BV | 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting...voir plus 12-Hydroxy Stearic Acid (12-HSA) is a saturated hydroxyl fatty acid that is a hard, waxy, cream colored product in the form of flakes or powder, and is nearly tasteless and odorless. 12-HSA reacts with acrylic esters to produce durable, hard thermosetting polymers used as a coating in metal decorative finishes, industrial appliance, and high quality automotive, and is a useful component in hot-melt adhesives, inks, and polishes. voir moins | |
| 2-Ethylhexyl Acetate | Chemoxy International Ltd | 2-Ethylhexyl Acetate is a clear, polar solvent with low volatility, suitable as a carrier solvent for nitrocellulose production and many other natural and synthetic resins used in a wide range of industrial applications. It is hydrophobic and has a coales...voir plus 2-Ethylhexyl Acetate is a clear, polar solvent with low volatility, suitable as a carrier solvent for nitrocellulose production and many other natural and synthetic resins used in a wide range of industrial applications. It is hydrophobic and has a coalescing action in emulsion paints where VOC is not a driving issue. 2-Ethylhexyl Acetate is used in some lacquers, NC lacquer emulsions, screen inks, and some enamels to improve flow and film formation. voir moins | |
| Blown Castor Oil (BCO) | Castor International BV | Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There...voir plus Blown Castor Oil (BCO) (also known as: oxidized castor oil, polymerized castor oil, caster stand oil) is a golden yellow to honey colored viscous liquid. Blown Castor Oil (BCO) has an acid value of 3 to 25 mg KOH/g and a viscosity of 15 to 17 Poise. There are numerous applications in various industrial segments, such as adhesives (hot-melt and solution): plasticizer and coupling solvent for resins and modifiers; inks: resin and binder plasticizer, medium for dispersion of pigments and dyes; sealants and caulks: flexibility, penetration, adhesion. voir moins | |
| Coasol™ | Chemoxy International Ltd | Coasol™ is a mixture of Di-Isobutyl Succinate, Di-Isobutyl Glutarate and Di-Isobutyl Adipate. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number...voir plus Coasol™ is a mixture of Di-Isobutyl Succinate, Di-Isobutyl Glutarate and Di-Isobutyl Adipate. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has excellent water resistance, improved film hardness without cracking, and improved color development and minimal impact on gloss. Coasol™ is used in printing paint cleaners, paint removal formulations, and floor wax removal formulations. voir moins | |
| Coasol™ 290 Plus | Chemoxy International Ltd | Coasol™ 290 Plus is a mixture of di-esters. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has reduced solvent loading to allow...voir plus Coasol™ 290 Plus is a mixture of di-esters. It is a very high performance coalescing system, which gives the formulator flexibility to achieve low VOC targets whilst improving paint performance in a number of areas. It has reduced solvent loading to allow incorporation of open time extenders and freeze/thaw protection systems. It also has improved paint rheology and pigment wetting. Coasol™ 290 Plus is used in printing paint cleaners, paint removal formulations, and floor wax removal formulations. voir moins | |
| Dehydrated Castor Oil (DCO), Commercial Grade | Castor International BV | Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal...voir plus Dehydrated Castor Oil (DCO), Commercial Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Commercial Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 6 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil (DCO), Pale Grade | Castor International BV | Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxide...voir plus Dehydrated Castor Oil (DCO), Pale Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Pale Grade has a characteristic odor and is a yellow oily liquid. It has a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil (DCO), Special Grade | Castor International BV | Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal ox...voir plus Dehydrated Castor Oil (DCO), Special Grade, is created when approximately 5% of the chemically combined water has been removed. Its drying properties are similar to those of Tung oil. Heating the oil in the presence of catalysts such as clays and metal oxides, phosphoric acid, and sulfuric acid, is where dehydration is carried out. Dehydrated Castor Oil (DCO), Special Grade has a characteristic odor and is a yellow oily liquid. It has an acid value of 4 mg KOH/g max and a Poise viscosity (25°C) of 1.6 to 2.8. Dehydrated castor oil is a unique drying oil, which imparts fine gloss, toughness, good flexibility, adhesion, and chemical and water resistance to the dry paint film with non-yellowing properties. DCO is a very suitable for Linseed oil. Using DCO with paints offer superior finish and are super white. Applications are as a primary binder for enamels, house paints, sealants, caulks, and inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spe...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectr...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spe...voir plus Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. voir moins | |
| Ethylene Glycol Diacetate | Chemoxy International Ltd | Ethylene Glycol Diacetate is a colourless, low odor solvent. It has a very slow evaporation profile that finds major applications in foundry core-binding and in thermoplastic acrylic coatings. Ethylene Glycol Diacetate has a low evaporation rate, such as ...voir plus Ethylene Glycol Diacetate is a colourless, low odor solvent. It has a very slow evaporation profile that finds major applications in foundry core-binding and in thermoplastic acrylic coatings. Ethylene Glycol Diacetate has a low evaporation rate, such as low MIR, non-HAP, non-Sara, and is biodegradable. Ethylene Glycol Diacetate is used in baking lacquers, enamels, a solvent for cellulosic coatings, and can be used in some ink systems such as screen inks. voir moins | |
| Glutaric Anhydride | Chemoxy International Ltd | Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, part...voir plus Glutaric Anhydride is a white crystalline powder and a carboxylic acid anhydride. It is more reactive than its corresponding acid and ester and thus commonly used as an intermediate. Glutaric Anhydride is used dyes, and in the production of polymers, particularly modified unsaturated linear (epoxy) polyesters with interesting effects on cure speed and reactivity. voir moins | |
| Hydrogenated Castor Oil (HCO) | Castor International BV | Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applicat...voir plus Hydrogenated Castor Oil (HCO) is a compound attained by the hydrogenation of refined castor oil. It is a hard, waxy, white to cream colored product with a high melting point of 83 to 87 C°, and is nearly tasteless and odorless. There are numerous applications in various industrial segments, such as a slip additive in paints, plastics (PE), and inks and as a dispersing agent in carbon papers, inks, and plastic color master batches and as a dispersing additive and flow control in sealants, hot-melt adhesives, powder coatings, and more. voir moins | |
| Isoamyl Acetate | Chemoxy International Ltd | Isoamyl Acetate is used as a low toxicity solvent. It was extensively used in the aircraft industry for stiffening fabric flying surfaces as the carrier for the nitrocellulose and retains this application in model aircraft only. Isoamyl Acetate is used in...voir plus Isoamyl Acetate is used as a low toxicity solvent. It was extensively used in the aircraft industry for stiffening fabric flying surfaces as the carrier for the nitrocellulose and retains this application in model aircraft only. Isoamyl Acetate is used in varnishes and nitrocellulose lacquers. voir moins | |
| Isoamyl Alcohol | Chemoxy International Ltd | Isoamyl Alcohol is a diluent in some printing inks, lacquers, paints, and gums. It is also called Isoamyl Alcohol 99%. Isoamyl Alcohol is used in printing inks, paints, and lacquers. | |
| Ricinoleic Acid (RA) | Castor International BV | Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal ...voir plus Ricinoleic Acid (RA), prepared from castor oil, is an unsaturated fatty acid viscous liquid that has a clear, yellowish appearance and an acid value of 175 mg KOH/g min. There are numerous applications in various industrial segments, such as soaps: metal working fluids, cutting oils, emulsifiers, and industrial lubricants; Surface coating: used as a pigment/dye dispersants in plastics, inks, coatings, etc.; Textiles: providing surface wetting and lubricity, and polarity. voir moins | |
| Sulphonated Castor Oil (SCO) | Castor International BV | Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling ag...voir plus Sulphonated Castor Oil (SCO), an anionic surfactant, has a purity of 75% with a non-volatile content of 70 to 85% and free fatty acid of 30 % max. It has many applications where it functions as a dispersing agent, detergent, wetting agent, and leveling agent. Sulphonated Castor Oil (SCO) is used as a dispersion and pigment wetting application in the paint industry, and as leveling and dye dispersion in the inks industry, among others. voir moins |
