| Emulsogen® COL 100 | Clariant International Ltd. | Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as...voir plus Emulsogen® COL 100 is an ether carboxylic with excellent emulsification and dispersing properties. It is used as a co-emulsifier in a broad variety of emulsifiable metal working fluids. In combination with other suitable nonionic or anionic components, as little as 2-3 % Emulsogen COL 100 in the mineral oil concentrate are sufficient for improved emulsion stability and dispersity. Emulsogen® COL 100 shows also outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate (K-value: approx. 33 according to DIN 53903). voir moins | |
| Emulsogen® MTP 030 | Clariant International Ltd. | Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able t...voir plus Emulsogen® MTP 030 is a multifunctional label-free nonionic emulsifier for metal working fluids with outstanding low foaming properties. It also exhibits very good lime soap dispersing properties (K-value approx. 20 g according to DIN 53903) and is able to disperse large quantities of calcium oleate or tallate. When applied as a nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 030 is highly compatible with anionic and other nonionic formulation components. Because of its excellent solubility in almost all kinds of mineral oils, this product can be used as an anti-wear additive to improve lubricity. It also performs as a better lubricant than mineral oil and TMP-trioleate. voir moins | |
| Emulsogen® MTP 070 | Clariant International Ltd. | Emulsogen® MTP 070 is an excellent emulsifier for mineral oils and vegetable oil. Already 5% of Emulsogen® MTP 070, calculated on the amount of mineral oil to be emulsified is sufficient for stable emulsions. For rape seed oil approx. 15-20% Emulsogen® MT...voir plus Emulsogen® MTP 070 is an excellent emulsifier for mineral oils and vegetable oil. Already 5% of Emulsogen® MTP 070, calculated on the amount of mineral oil to be emulsified is sufficient for stable emulsions. For rape seed oil approx. 15-20% Emulsogen® MTP 070 is necessary; the emulsions are stable for more then 14 days. Emulsogen® MTP 070 shows also outstanding lime soap dispersing power and is able to disperse large quantities of calcium oleate or tallate (K-value: approx. 20 - 25 g according to DIN 53903). When applied as nonionic emulsifier component in emulsifiable metal working fluids, Emulsogen® MTP 070 is highly compatible with anionic and other nonionic formulation components. voir moins | |
| Genamin® 3920 | Clariant International Ltd. | Genamin® 3920 can be used as neutralizing agent in emulsifiable metal working fluids, having good oil solubility and a base strength comparable to triethanolamine (TEA). Due to the high boiling point, Genamin® 3920 is an almost nonvolatile component, whic...voir plus Genamin® 3920 can be used as neutralizing agent in emulsifiable metal working fluids, having good oil solubility and a base strength comparable to triethanolamine (TEA). Due to the high boiling point, Genamin® 3920 is an almost nonvolatile component, which can be used for high temperature operations, e.g. heavy chip removal operations and emulsion cleaners applied at 80°C or higher. Genamin® 3920 is surface active and shows good emulsifying properties and improves the dispersibility and stability of emulsions. Occasionally Genamin® 3920 can improve spontaneity and shorten the emulsifying time considerably. Due to the foam properties Genamin® 3920 is not recommended for the use in fully synthetic fluids. voir moins | |
| Genamin® CH 020 | Clariant International Ltd. | Genamin® CH 020 can be used as a neutralizing agent in emulsifiable and fully synthetic metal working fluids, as well as in metal cleaners. Genamin® CH 020 is water soluble, easy to formulate and has a base strength in between Diethanolamine (DEA) and Tri...voir plus Genamin® CH 020 can be used as a neutralizing agent in emulsifiable and fully synthetic metal working fluids, as well as in metal cleaners. Genamin® CH 020 is water soluble, easy to formulate and has a base strength in between Diethanolamine (DEA) and Triethanolamine (TEA). Due to the high boiling point, Genamin® CH 020 is an almost nonvolatile component, which can be used for high temperature operations, e.g. heavy chip removal operations and emulsion cleaners applied at 80°C or higher. Genamin® CH 020 is multifunctional additive which has a very low tendency to leach copper and cobalt, a very low foaming tendency - ideal for high pressure operations, and also acts as a hydrotrope in fully synthetic and metalworking fluids and cleaners. voir moins | |
| Genapol® PN 30 | Clariant International Ltd. | Genapol® PN 30 is a low-foaming, nonionic lubrication and wetting agent. In combination with corrosion inhibitors like Hostacor® IT, Hostacor® BIT or Hostacor® BI, clear water soluble metal working fluids with good corrosion protecting and lubricating pro...voir plus Genapol® PN 30 is a low-foaming, nonionic lubrication and wetting agent. In combination with corrosion inhibitors like Hostacor® IT, Hostacor® BIT or Hostacor® BI, clear water soluble metal working fluids with good corrosion protecting and lubricating properties are obtained. voir moins | |
| Genapol® PS | Clariant International Ltd. | Genapol® PS is a water soluble mineral oil free and almost inflammable lubricant. Genapol PS is designed for the use in fully synthetic metal working fluids such asgrinding fluids and fire resistant hydraulic fluids (HFA S-types). The “reverse solubility”...voir plus Genapol® PS is a water soluble mineral oil free and almost inflammable lubricant. Genapol PS is designed for the use in fully synthetic metal working fluids such asgrinding fluids and fire resistant hydraulic fluids (HFA S-types). The “reverse solubility” reduces foam generation and foam stability. voir moins | |
| Hostacor® ITD | Clariant International Ltd. | Hostacor® ITD is used as a lubricity and extreme pressure anti wear additive in industrial lubricants. It provides excellent corrosion inhibition for aluminum alloys and ferrous metals. | |
| Hostagliss® L4 | Clariant International Ltd. | Hostagliss® L4 is an emulsifiable, chlorine free lubricant additive. It is a polar polymer containing in addition an acid function which can be neutralised. The multiple functional groups of the polymer are exhibiting a high affinity to metal surfaces. | |
| Hostagliss® PA 135 | Clariant International Ltd. | Hostagliss® PA 135 is an oil soluble additive for lubricants. It has good lubricity and anti wear properties. Therefore it is used as a component of non water miscible metal working fluids such as cutting oils or deep drawing oils. Other applications are ...voir plus Hostagliss® PA 135 is an oil soluble additive for lubricants. It has good lubricity and anti wear properties. Therefore it is used as a component of non water miscible metal working fluids such as cutting oils or deep drawing oils. Other applications are gear/engine oils and greases. Hostagliss® PA 135 can be also used as an additive for emulsifiable metal working fluids to improve anti wear properties. Because of its outstanding solubility in all kinds of mineral oils, this product is easy to formulate. Compatability with other formulating components commonly used for emulsifiable metal working fluids is excellent. Hostagliss® PA 135 shows also a quite good hydrolytic stability. voir moins | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...voir plus ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. voir moins |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...voir plus FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. voir moins |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...voir plus High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. voir moins |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...voir plus Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. voir moins |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...voir plus MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. voir moins |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...voir plus RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. voir moins |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...voir plus Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. voir moins |  |
| RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...voir plus RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. voir moins |  |
| SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER | Anton Paar Viscosity & Rheology | The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...voir plus The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. voir moins |  |
