BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | |
BENATHIX® | Elementis | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...voir plus BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. voir moins | |
BENGEL® 434 | Elementis | BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems. | |
BENGEL® 818 | Elementis | BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...voir plus BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. voir moins | |
BENGEL® 828 | Elementis | BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol. | |
BENGEL® 958 | Elementis | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...voir plus BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. voir moins | |
BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
BENTONE® 30 | Elementis | BENTONE® 30 is an organic derivative of bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems. | |
BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | |
BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | |
BENTONE® 52 | Elementis | BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coa...voir plus BENTONE® 52 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic systems. This highly efficient rheology modifier and cost effective rheology modifier is suitable for various solventborne paint and coatings systems. voir moins | |
BENTONE® 54 | Elementis | BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct m...voir plus BENTONE® 54 rheological additive is a modified bentonite organoclay for low to medium polarity aliphatic and aromatic solventborne paint and coating systems. This rheology modifier is easier to disperse than normal organoclays and is designed for direct mill-base incorporation. voir moins | |
BENTONE® 54K | Elementis | BENTONE® 54K is an organic derivative of bentonite clay. This rheological additive is designed for low to intermediate-polarity organic systems. | |
BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | |
BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...voir plus BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. voir moins | |
BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | |
BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | |
BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | |
BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | |
BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | |
BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | |
BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...voir plus BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. voir moins | |
BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...voir plus BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. voir moins | |
BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...voir plus BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. voir moins | |
Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
DAPRO® BIO 9910 | Elementis | DAPRO® BIO 9910 is a liquid vegetable oil-based defoamer, for universal waterborne applications. The product shows excellent compatibility, fast defoaming performance, and very good long-term efficiency. | |
DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...voir plus DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. voir moins | |
DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...voir plus DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. voir moins | |
DAPRO® DF 31 | Elementis | DAPRO® DF 31 is a VOC-free, water-dispersible defoamer with excellent application properties. It is effective in high-quality quality waterborne inks, adhesives, and industrial coatings and is particularly useful for low-sheen paints and coatings. | |
DAPRO® DF 503 | Elementis | DAPRO® DF 503 is a water-dispersible defoamer that is excellent in aqueous media. It is particularly effective in flexo, gravure, and screen printing inks, adhesives, and water-based industrial coatings as it exhibits fast knockdown even at low use levels...voir plus DAPRO® DF 503 is a water-dispersible defoamer that is excellent in aqueous media. It is particularly effective in flexo, gravure, and screen printing inks, adhesives, and water-based industrial coatings as it exhibits fast knockdown even at low use levels. It is excellent in suppressing foam in effluent systems. voir moins | |
DAPRO® DF 52 | Elementis | DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unaccept...voir plus DAPRO® DF 52 is VOC-, mineral oil- and silicone - free and has excellent defoaming properties, particularly in waterborne flexo-inks, wood clear coats and adhesives.. DAPRO® DF 52 is particularly suitable in aqueous systems where mineral oils are unacceptable in the chemical waste water. voir moins | |
DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | |
DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | |
DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | |
DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | |
DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | |
DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...voir plus DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | |
DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | |
DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | |
DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
DUMACIL® 402 FGK | Elementis | DUMACIL® 402 FGK is a micro-fine silica treated with an organic silicone compound. | |
DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. |