| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...voir plus D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. voir moins | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...voir plus D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...voir plus D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. voir moins | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...voir plus D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...voir plus D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...voir plus D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...voir plus LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. voir moins | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...voir plus LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. voir moins | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...voir plus LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. voir moins | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...voir plus LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. voir moins | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...voir plus LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. voir moins | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...voir plus Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...voir plus Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. voir moins | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...voir plus TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. voir moins | |
| ZNO Grade 400 | Zinc Oxide LLC | ZNO Grade 400 is manufactured by French (Indirect) Process with medium surface area, high assay and moderate impurities. This grade is widely used in the tire and rubber, paint and coatings, and all applications requiring an FDA approved substance. | |
| ZNO Grade 500 | Zinc Oxide LLC | ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Dir...voir plus ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. voir moins | |
| ZNO Grade 800L | Zinc Oxide LLC | ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less ...voir plus ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics. voir moins | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...voir plus A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. voir moins |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...voir plus Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. voir moins |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...voir plus We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. voir moins |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...voir plus The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. voir moins |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...voir plus This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. voir moins |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...voir plus Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. voir moins |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...voir plus Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. voir moins |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...voir plus When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. voir moins |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...voir plus Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. voir moins |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...voir plus Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. voir moins |  |
