| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| BYD-1318 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is...展开 BYD-1318, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a complex adhesive for paper and aluminum coatings, as well as a transfer adhesive. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 收起 | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...展开 BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. 收起 | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| HE100 | Tianyi Chemical Engineering Material Co., Ltd. | HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...展开 HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 收起 | |
| HE105 | Tianyi Chemical Engineering Material Co., Ltd. | HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...展开 HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 收起 | |
| HE85 | Tianyi Chemical Engineering Material Co., Ltd. | HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...展开 HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 收起 | |
| HE90 | Tianyi Chemical Engineering Material Co., Ltd. | HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...展开 HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 收起 | |
| HE95 | Tianyi Chemical Engineering Material Co., Ltd. | HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...展开 HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. 收起 | |
| HS2255 | Tianyi Chemical Engineering Material Co., Ltd. | HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It conta...展开 HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It contains less than .7% easily saponified chlorine. 收起 | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...展开 HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. 收起 | |
| HS9705 | Tianyi Chemical Engineering Material Co., Ltd. | HS9705, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing inks, screen printing inks, and adhesives. This product is resistant to boiling water and exhibits low shrinkage properties. | |
| HS971 | Tianyi Chemical Engineering Material Co., Ltd. | HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS971, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起 | |
| HS973 | Tianyi Chemical Engineering Material Co., Ltd. | HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS973, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起 | |
| HS975 | Tianyi Chemical Engineering Material Co., Ltd. | HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between ...展开 HS975, in the form of an amorphous white powder, is a hydrophilic fumed silica that can be used in coatings, adhesives, and oil inks. This product is a rheology modifier for adhesives and sealants. The pH value of the product in a suspension is between 3.7 and 4.5. 收起 | |
| HT100 | Tianyi Chemical Engineering Material Co., Ltd. | HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...展开 HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 | |
| HT105 | Tianyi Chemical Engineering Material Co., Ltd. | HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...展开 HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 | |
| HT115 | Tianyi Chemical Engineering Material Co., Ltd. | HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...展开 HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 | |
| HT85 | Tianyi Chemical Engineering Material Co., Ltd. | HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...展开 HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 | |
| HT90 | Tianyi Chemical Engineering Material Co., Ltd. | HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...展开 HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 | |
| HT95 | Tianyi Chemical Engineering Material Co., Ltd. | HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...展开 HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. 收起 |
