| CV4-2500 | NuSil Silicone Technology 1 | CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be u...展开 CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be used as an embedding or potting compound for electronic assemblies that need to be protected from extremes in radiation, humidity, mechanical and thermal stress. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...展开 CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. 收起 | |
| EPM-2420 | NuSil Silicone Technology 1 | EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and ...展开 EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and other hazards. It is also ideal for applications where a low viscosity and clarity are important. 收起 | |
| EPM-2461 | NuSil Silicone Technology 1 | EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any appl...展开 EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any applications where grooves and other configurations require a non-flowing material. 收起 | |
| EPM-2462 | NuSil Silicone Technology 1 | EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place ...展开 EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place conductive gaskets, and for applications that require a material with low volatility. 收起 | |
| EPM-2490 | NuSil Silicone Technology 1 | EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal int...展开 EPM-2490 is a two-part, white, thermally conductive, electrically insulating silicone system that is non-corrosive. It can be used in applications that require a a broad operating temperature range. It is ideal to be used when a form-in-place, thermal interface material (TIM) is needed for use as a sealing, caulking, adhesive or potting material in electronics applications that require little volatility to prevent contamination in sensitive devices. This TIM is designed to provide heat transfer between electrical/electronic components and their heat sinks for a variety of component level packaging. 收起 | |
| EPM-2495 | NuSil Silicone Technology 1 | EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, ba...展开 EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable material. It is also ideal for applications that would require a low volatility under extreme operating conditions. 收起 | |
| EPM-2890 | NuSil Silicone Technology 1 | EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product ...展开 EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product can also function as a caulking, sealing, potting or adhesive material in electronics applications that require minimal outgassing to prevent condensation from building in sensitive devices. 收起 | |
| EPM1-2493 | NuSil Silicone Technology 1 | EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that requir...展开 EPM1-2493 is a white, thermally conductive silicone elastomer that has low viscosity and cures with the addition of heat. It can be used to adhere integrated circuit substrates, heat sinks, base plates or where grooves or other configurations that require a material with limited flow. This product is ideal for applications that require a low volatility, conformal, thermally conductive silicone that can transfer heat between electrical components and and their heat sinks. 收起 | |
| FS-3502-1 | NuSil Silicone Technology 1 | FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as wel...展开 FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as well as applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can be used for components exposed to JP-8, aviation fuels and solvents. 收起 | |
| FS-3730 | NuSil Silicone Technology 1 | FS-3730 is a white, one-part, fluorosilicone adhesive/sealant that can be cured at room temperture and has 100 mole % fluorosilicone. This can provide sufficient protection or bonding of components that are exposed to aviation fuels or gasoline. It can al...展开 FS-3730 is a white, one-part, fluorosilicone adhesive/sealant that can be cured at room temperture and has 100 mole % fluorosilicone. This can provide sufficient protection or bonding of components that are exposed to aviation fuels or gasoline. It can also be used for sealing and bonding applications that require solvent and/or fuel resistance, and it bonds aggressively to most surfaces. 收起 | |
| FS-3730-11 | NuSil Silicone Technology 1 | FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is als...展开 FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is also able to provide protection or can bond hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| FS-3730-2 | NuSil Silicone Technology 1 | FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sea...展开 FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sealing or bonding applications requiring fuel and/or solvent resistance. Another strong property is that it bonds aggressively to most surfaces. 收起 | |
| FS-3775 | NuSil Silicone Technology 1 | FS-3775 is a fluorosilicone polymer based RTV silicone that is translucent and bonds aggressively to most surfaces. It is an ideal product for bonding and sealing applications that require solvent and/or fuel resistance. It can also provide protection or ...展开 FS-3775 is a fluorosilicone polymer based RTV silicone that is translucent and bonds aggressively to most surfaces. It is an ideal product for bonding and sealing applications that require solvent and/or fuel resistance. It can also provide protection or bonding for hardware components that have been exposed to gasoline or aviation fuels. It is best utilized for applications that require an operating temperature range of -65°C to 240°C (-85°F to 465°F). 收起 | |
| FS-3781 | NuSil Silicone Technology 1 | FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for tran...展开 FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for transfer and compression molding parts such as gasket, stoppers, seals and o-rings. 收起 | |
| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...展开 FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. 收起 | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...展开 FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. 收起 | |
| Fumaric Acid | Changzhou Yabang Chemical Co., Ltd. | Fumaric Acid, in the form of a white crystal, takes the function of antioxidants in many applications.This product has uses in polyester resins, plasticizers, and coatings. It has a melting point of 287-302°C and a moisture content of ≤ 0.25 %. | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...展开 GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. 收起 | |
| GEL-8170 | NuSil Silicone Technology 1 | GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics ...展开 GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics applications including HBLED's, photo detectors, flat panel displays and tacking/staking sensitive joints. This gel is ideal for applications that require an operating temperature range of -65°C to 200°C (-85°F to 392°F). 收起 | |
| GEL-8250 | NuSil Silicone Technology 1 | GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in appl...展开 GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in applications that involve extreme temperatures with an operating temperature range of -115°C to 265°C (-178°F to 500°F). 收起 | |
| GEL1-8155 | NuSil Silicone Technology 1 | GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be use...展开 GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be used for backfilling, potting, dampening, and encapsulating applications that require a firm gel with optical clarity. 收起 | |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
| JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
| JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
| JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
| JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| LS-6140 | NuSil Silicone Technology 1 | LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics ...展开 LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics applications that require a low outgassing and minimal volatile condensables to protect sensitive devices from condensation. 收起 | |
| LS-6143 | NuSil Silicone Technology 1 | LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It...展开 LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It can also be used for bonding, casting or injection molding of permormance optical components. It is best for applications requiring an operating temperature range of -115°C to 260°C (-178°F to 500°F). 收起 | |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...展开 LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). 收起 | |
| LS-6943 | NuSil Silicone Technology 1 | LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for ...展开 LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for the casting, injecting or bonding molding of high performance optical components. It is ideal to be used applications with an opertaing temperature range of -115 to 260°C (–175 to 500°F). 收起 | |
| LS-6946 | NuSil Silicone Technology 1 | LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product ...展开 LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product is physically strong and operates on a wide temperature range. It is ideal for the bonding, casting or injecting molding of high performance optical components. 收起 | |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...展开 LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. 收起 | |
| LS1-6140 | NuSil Silicone Technology 1 | LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...展开 LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. 收起 | |
| LS1-6941 | NuSil Silicone Technology 1 | LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components....展开 LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components. It will cure in contact with most materials common to biomedical assemblies. 收起 | |
| LS2-6140 | NuSil Silicone Technology 1 | LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazar...展开 LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazards. It has exceptional thermal stability and is designed to work in optically harsh environments where high power led and uv led packages are a factor. 收起 | |
| LS2-6941 | NuSil Silicone Technology 1 | LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detec...展开 LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detectors, lasers, HBLEDs, discrete optics and flat panel displays that require a 1.41 refractive index. It can also provide protection for electronic components from vibration, shock, dust, moisture and other environmental hazards by potting or encapsulating. 收起 | |
| Maleic Anhydride | Changzhou Yabang Chemical Co., Ltd. | Maleic Anhydride, in the form of white flakes, is soluble in ethanol, ether, and acetone. This product has uses in polyester resins, and has a crystal point of ≥52.4°C and an iron content of ≤ 5ppm. | |
| ML 189 Linseed Oil | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| ML 189-70 Linseed Oil | ADM | ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paint...展开 ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paints. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. |
