| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...展开 Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. 收起 | |
| DOWSIL™ RSN-0217 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | 作为粉末或液体涂料的主体树脂或与有机树脂一起作为联合树脂，用来提高热稳定性和耐侯性。 | |
| DOWSIL™ RSN-0220 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | 100%羟基官能硅树脂，用于粉末和液体涂料的主体树脂。 | |
| DOWSIL™ RSN-0233 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | 100%羟基官能硅树脂，用于粉末和液体涂料的主体树脂。 | |
| DOWSIL™ RSN-0249 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® RSN-0249 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0255 Flake Resin | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® RSN-0255 Flake Resin is a 100% silicone, silanol-functional resin for use as a binder for powder and liquid coatings. It offers excellent heat stability and good weatherability. | |
| DOWSIL™ RSN-0409 HS Resin | Dow Performance Silicones Paints, Inks and Coatings | 80%固含量，羟基官能硅树脂，用于液体涂料。 | |
| DOWSIL™ RSN-0431 HS Resin | Dow Performance Silicones Paints, Inks and Coatings | 80%固含量，羟基官能硅树脂，用于液体涂料。 | |
| DOWSIL™ RSN-0804 Resin | Dow Performance Silicones Paints, Inks and Coatings | 硅烷醇官能性树脂，以溶液形式供货，具有出色的悬浮性、抗溶剂性、光泽保持力和高温防护作用。 | |
| DOWSIL™ RSN-0805 Resin | Dow Performance Silicones Paints, Inks and Coatings | 硅烷醇官能性树脂，用于保养漆、着色烘干瓷漆和装饰面漆。 | |
| DOWSIL™ RSN-0806 Resin | Dow Performance Silicones Paints, Inks and Coatings | 用于空气加热器、烘干炉等的有色烘干瓷漆。单独使用或与Dow Corning® 805树脂混合使用，提高中间体硬度。 | |
| DOWSIL™ RSN-0808 Resin | Dow Performance Silicones Paints, Inks and Coatings | 推荐用于空气加热器、焚化装置、干衣机、烘干炉等的装饰表面涂层，满足温度高达540℃时的出色的色彩和光泽保持力的要求。 | |
| DOWSIL™ RSN-0840 Resin | Dow Performance Silicones Paints, Inks and Coatings | 溶于甲苯的硅树脂,具有出色的悬浮特性、光泽保持力和高温防护性。 | |
| DOWSIL™ RSN-6018 Resin Intermediate | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins mo...展开 Dow Corning® RSN-6018 Resin Intermediate is a silicone intermediate for colored and high-temperature finishes. It is a silanol-functional, low-molecular-weight silicone intermediate that reacts with a wide variety of organic resins and monomers. Resins modified with this product show improved heat stability and weatherability over unmodified resins. 收起 | |
| DOWSIL™ US-CF 2403 Resin | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® US-CF 2403 Resin is a methyl-methoxy functional, solvent-less and low molecular weight liquid siloxane. It can be used as a sole binder or in combination with organic resins, in both clear and pigmented formulations. | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | 提高溶剂型涂料的附着力，提供颜料处理。 | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | 附着力促进剂可作为添加剂或底层涂料用于水性体系，用来提高有机主体树脂和无机基材之间的结合力。 | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起 | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| LYNDCOAT 15 RTU | Elkem Silicones | LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...展开 LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. 收起 | |
| LYNDCOAT BR 1100 RTU | Elkem Silicones | LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...展开 LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1102 | Elkem Silicones | LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...展开 LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. 收起 | |
| LYNDCOAT BR 1103 RTU | Elkem Silicones | LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...展开 LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1110 RTU | Elkem Silicones | LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...展开 LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. 收起 | |
| LYNDCOAT BR 1211 | Elkem Silicones | LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...展开 LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1214 | Elkem Silicones | LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green...展开 LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...展开 LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. 收起 | |
| LYNDCOAT BR 1812 | Elkem Silicones | LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replace...展开 LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR 1812 RTU does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR 1812 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2100 RTU | Elkem Silicones | LYNDCOAT BR 2100 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures durable performance. | |
| LYNDCOAT BR 2104 | Elkem Silicones | LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to...展开 LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2201 | Elkem Silicones | LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces t...展开 LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR 2201 does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed, or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. LYNDCOAT® BR 2201 is of high viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2204 A1 | Elkem Silicones | LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build...展开 LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2204 E4 | Elkem Silicones | LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce b...展开 LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2511 RTU | Elkem Silicones | LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performan...展开 LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 2512 | Elkem Silicones | LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performanc...展开 LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 601 RTU | Elkem Silicones | LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU rep...展开 LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-601 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-601 RTU is of medium viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 790 RTU | Elkem Silicones | LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU rep...展开 LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-790 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-790 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT MR 5100 RTU | Elkem Silicones | LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessin...展开 LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessing excellent release and lubrication properties towards rubber. LYNDCOAT MR 5100 RTU helps keep moulds and vents clean, which reduces defects and downtime. LYNDCOAT MR 5100 RTU is durable through multiple production cycles. The need for reapplication is dependent on factors such as: the rubber compound, tread design, curing time, curing temperature, application technique and press type. LYNDCOAT MR 5100 RTU is designed for processes requiring low viscosity mould lubricants. 收起 | |
| MODIPER® A1100 | NOF Corporation | MODIPER® A1100 is a polyethylene-based polystyrene modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment an...展开 MODIPER® A1100 is a polyethylene-based polystyrene modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A1401 | NOF Corporation | MODIPER® A1401 is a polyethylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic...展开 MODIPER® A1401 is a polyethylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A3400 | NOF Corporation | MODIPER® A3400 is a polypropylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorgani...展开 MODIPER® A3400 is a polypropylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4100 | NOF Corporation | MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pi...展开 MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4300 | NOF Corporation | MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a di...展开 MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4400 | NOF Corporation | MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5300 | NOF Corporation | MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of...展开 MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5400 | NOF Corporation | MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L130D | NOF Corporation | MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fille...展开 MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L430-G | NOF Corporation | MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility...展开 MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® F606 | NOF Corporation | MODIPER® F606 is a fluorinated copolymer formulated as a water and oil repellent. It works in acrylic coating materials and resins and is used in various types of paints, pigments, adhesives, and films. | |
| MODIPER® FS700 | NOF Corporation | MODIPER® FS700 is a silicone copolymer formulated for adhesion control with low migration of silicon-related substances to the adhesive surface. This product is used in various types of paints, pigments, adhesives, and films. | |
| NONPOL® PMA-50W | NOF Corporation | NONPOL® PMA-50W is a water-based solvent containing polymaleic acid. This product is used with water treatment chemicals, anti-corrosion agents, and other applications. | |
| NT-552 | Changzhou Niutang Chemical Plant | NT-552 is a white powdered curing agent. It is widely used for its stabilizing, adhesive and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 416 | Elkem Silicones | SILCOLAPSE 416 is a compound based on polydimethyl siloxane oil and silica. It has the characteristic of being easy to disperse in most foaming mediums. | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE 7611 | Elkem Silicones | SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst). | |
| SILCOLEASE ADD 107 | Elkem Silicones | SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the relea...展开 SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the release system on PET film both when laminated against adhesives and reeled as coated film. 收起 | |
| SILCOLEASE ADD 382 | Elkem Silicones | SILCOLEASE ADD 382 is a silicone based additive used with a reactive solventless silicone polymer system for POLYESTER (PET) FILM RELEASE COATING applications. | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE CATA 11091 M | Elkem Silicones | SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 12070 | Elkem Silicones | SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. |
