| Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) | Asahi Kasei Corp. Bemberg Div. | Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with th...展开 Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with these conventional materials, due to composition, Bemliese™ has excellent features such as low particle and lint, high purity and biodegradability, good liquid absorbency, high heat resistance, etc. It's made from cotton linter, which is a by-product of cotton yield. It is suitable for use in filters, hygienic products, medical and agricultural materials, wipes for high-precision machinery and laboratories, etc. It holds international certification in BIODEGRADABLE, VEGAN, and OEKO-TEX. The Basic type: Fiber diameter is about 12~13μm. These values are just for reference and tested by methods of Asahi Kasei. 收起 | |
| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...展开 Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...展开 Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...展开 Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...展开 Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Eracoat Accelerator | Era Polymers | Eracoat Accelerator is a clear liquid additive for the product Eracoat 45 Gloss coating. It accelerates the curing rate, reduces the tack-free time, and reduces the recoating time as it initiates a faster curing of the coating. It is not suitable for exte...展开 Eracoat Accelerator is a clear liquid additive for the product Eracoat 45 Gloss coating. It accelerates the curing rate, reduces the tack-free time, and reduces the recoating time as it initiates a faster curing of the coating. It is not suitable for exterior or wet coatings and can be used with interior timber flooring, particleboard, and cork flooring. 收起 | |
| Eracoat Flow Additive | Era Polymers | Eracoat Flow Additive is a surface tension modifier in the form of a clear liquid. It is an additive for coatings designed to minimize the rejection problems normally caused by wax, oil, and other common household contaminants. Eracoat Flow Additive is su...展开 Eracoat Flow Additive is a surface tension modifier in the form of a clear liquid. It is an additive for coatings designed to minimize the rejection problems normally caused by wax, oil, and other common household contaminants. Eracoat Flow Additive is suitable for the products Eracoat MDI 45 Gloss, Eracoat 45 Gloss, and Eracoat MDI High Build Sealer. It is not suitable for external or wet applications and can be used for interior flooring, particleboard, and cork flooring. 收起 | |
| Eracoat Wet Edge | Era Polymers | Eracoat Wet Edge is a blend of additives in the form of a clear liquid. It is used to slow down solvent evaporation and increase the working time of Eracoat coatings. Eracoat Wet Edge is not suitable for exterior use and can be used for interior timber fl...展开 Eracoat Wet Edge is a blend of additives in the form of a clear liquid. It is used to slow down solvent evaporation and increase the working time of Eracoat coatings. Eracoat Wet Edge is not suitable for exterior use and can be used for interior timber flooring, particleboard, and cork flooring applications. 收起 | |
| Santicizer 160 | Era Polymers | Santicizer 160 is a plasticiser for polyurethane based materials in the form of a colourless, oily liquid. It provides good processing characteristics due to low viscosity and is suitable for transparent or light coloured polymers or coatings. Santicizer ...展开 Santicizer 160 is a plasticiser for polyurethane based materials in the form of a colourless, oily liquid. It provides good processing characteristics due to low viscosity and is suitable for transparent or light coloured polymers or coatings. Santicizer 160 can be used in many caulks, sealants, and coatings. 收起 |
