| Bensub 2908 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2908 is a white powder and a degassing agent that has a density of 0.93. This product can reduce particulates on cured film, and is commonly used for interior and exterior powder coatings. | |
| Bensub 2999 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Bensub 2999 is a white powder and a high-performance degassing agent that has a softening point of 95-115°C. This product has good discoloration resistance and is commonly used for interior and exterior powder coatings. | |
| MatteX-3 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good...展开 MatteX-3 is a white or light yellow powder that is a reactive matting agent derived from carboxyl-function acrylic resin for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good matting performance, and good color stability. 收起 | |
| MatteX-8 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | MatteX-8 is a white or light yellow powder that is a novel matting agent for use in polyester/epoxy hybrid powder coatings. This product has a softening point of 100-125°C, good mechanical properties, and good color stability. | |
| Melafine® | OCI MELAMINE | Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...展开 Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. 收起 | |
| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...展开 MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...展开 MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. 收起 | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...展开 MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 收起 | |
| Mild-Matte A9 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | Mild-Matte A9 is a white or light yellow powder that is an effective matting agent for use in polyester/TGIC powder coatings. This product has a softening point of 100-125°C and good weather resistance. | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...展开 ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...展开 ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. 收起 | |
| PriMat A5 | Guangzhou ZEHM Functional Materials R&D Co.,Ltd. | PriMat A5 is a white or light yellow powder that is a novel matting agent for use in polyester/β-hydroxyalkylamide (HAA) based powder coatings. This product has a softening point of 95-120°C, and good mechanical and chemical resistance. | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. 收起 | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. 收起 | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. 收起 | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. 收起 | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. 收起 | |
| Verdcol® Blue 60 HG | Verdcol Ltd | Verdcol® Blue 60 HG is a highly saturated red shade blue pigment with good fastness. This product has an oil absorption of 40-45 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder...展开 Verdcol® Blue 60 HG is a highly saturated red shade blue pigment with good fastness. This product has an oil absorption of 40-45 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
| Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展开 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Orange 36 HG | Verdcol Ltd | Verdcol® BML Orange 36 HG is a red shade orange pigment with good opacity, gloss and fastness. This product has an oil absorption of 65-70 g/100g and a density of 1.6-1.7 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatin...展开 Verdcol® BML Orange 36 HG is a red shade orange pigment with good opacity, gloss and fastness. This product has an oil absorption of 65-70 g/100g and a density of 1.6-1.7 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 151 GH | Verdcol Ltd | Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate....展开 Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate. It can also be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 154 | Verdcol Ltd | Verdcol® BML Yellow 154 is a medium shade and good opacity yellow pigment and is recommended for water based systems. This product has an oil absorption of 55-60 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coat...展开 Verdcol® BML Yellow 154 is a medium shade and good opacity yellow pigment and is recommended for water based systems. This product has an oil absorption of 55-60 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, and wood coatings. 收起 | |
| Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展开 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
| Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
| Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 SO | Verdcol Ltd | Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coating...展开 Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coatings. It may also find use in decorative coatings and automotive coatings. 收起 | |
| Verdcol® DPP Orange 73 Y 02 | Verdcol Ltd | Verdcol® DPP Orange 73 Y 02 is a highly saturated orange pigment with good fastness. This product has an oil absorption of 48-51 g/100g and a density of 1.3-1.4 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder...展开 Verdcol® DPP Orange 73 Y 02 is a highly saturated orange pigment with good fastness. This product has an oil absorption of 48-51 g/100g and a density of 1.3-1.4 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® DPP Red 254 PTR | Verdcol Ltd | Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative c...展开 Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Orange 43 | Verdcol Ltd | Verdcol® Orange 43 is a pure shade orange pigment with good color strength and fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, powder coatings, coil c...展开 Verdcol® Orange 43 is a pure shade orange pigment with good color strength and fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Pink 122 | Verdcol Ltd | Verdcol® Pink 122 is a semi-opaque and blue shade red pigment with high gloss and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative...展开 Verdcol® Pink 122 is a semi-opaque and blue shade red pigment with high gloss and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Pink 122 GP | Verdcol Ltd | Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial...展开 Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Red 144 | Verdcol Ltd | Verdcol® Red 144 is a mid-blue shade red pigment with good fastness to light and weather. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, p...展开 Verdcol® Red 144 is a mid-blue shade red pigment with good fastness to light and weather. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Red 169 W | Verdcol Ltd | Verdcol® Red 169 W is a bright pink pigment with high transparency. This product has an oil absorption of 100-105 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Red 170 BN | Verdcol Ltd | Verdcol® Red 170 BN is a mid shade red pigment which is semi-opaque. This product has an oil absorption of 65-70 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil ...展开 Verdcol® Red 170 BN is a mid shade red pigment which is semi-opaque. This product has an oil absorption of 65-70 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Red 170 YO | Verdcol Ltd | Verdcol® Red 170 YO is a mid shade red pigment with good opacity. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coa...展开 Verdcol® Red 170 YO is a mid shade red pigment with good opacity. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Red 177 | Verdcol Ltd | Verdcol® Red 177 is a transparent blue shade red pigment with excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder co...展开 Verdcol® Red 177 is a transparent blue shade red pigment with excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings and wood coatings. 收起 | |
| Verdcol® Red 81 S | Verdcol Ltd | Verdcol® Red 81 S is a bright pink color with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Red 81 W | Verdcol Ltd | Verdcol® Red 81 W is a bright pink pigment with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Scarlet 166 | Verdcol Ltd | Verdcol® Scarlet 166 is a mid shade red pigment with good opacity and fastness. This product has an oil absorption of 50-55 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coat...展开 Verdcol® Scarlet 166 is a mid shade red pigment with good opacity and fastness. This product has an oil absorption of 50-55 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Violet 19 B2 | Verdcol Ltd | Verdcol® Violet 19 B2 is a highly saturated violet pigment with high transparency, gloss and color strength. This product has an oil absorption of 80-90 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, dec...展开 Verdcol® Violet 19 B2 is a highly saturated violet pigment with high transparency, gloss and color strength. This product has an oil absorption of 80-90 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Violet 19 G | Verdcol Ltd | Verdcol® Violet 19 G is a bright and slightly blue shade red pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, po...展开 Verdcol® Violet 19 G is a bright and slightly blue shade red pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Violet 23 KR | Verdcol Ltd | Verdcol® Violet 23 KR is a red shade violet pigment with high gloss. This product has an oil absorption of 75-80 g/100g and a density of 1.3-1.4 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil ...展开 Verdcol® Violet 23 KR is a red shade violet pigment with high gloss. This product has an oil absorption of 75-80 g/100g and a density of 1.3-1.4 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Violet 27 W | Verdcol Ltd | Verdcol® Violet 27 W is an economical pigment with good flow stability. This product has an oil absorption of 45-55 g/100g and a density of 1.6-1.7 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Violet 3 S | Verdcol Ltd | Verdcol® Violet 3 S is a brilliant red pigment with high transparency. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Violet 3 W | Verdcol Ltd | Verdcol® Violet 3 W is a brilliant and red shade pigment with transparent qualities. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Yellow 110 GP | Verdcol Ltd | Verdcol® Yellow 110 GP is a semi-opaque and red shade yellow pigment with good durability. This product has an oil absorption of 32-38 g/100g and a density of 1.8-1.9 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, ...展开 Verdcol® Yellow 110 GP is a semi-opaque and red shade yellow pigment with good durability. This product has an oil absorption of 32-38 g/100g and a density of 1.8-1.9 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 | |
| Verdcol® Yellow 110 PTR | Verdcol Ltd | Verdcol® Yellow 110 PTR is a transparent and red shade yellow pigment with good durability. This product has an oil absorption of 45-50 g/100g and a density of 1.8-1.9 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings,...展开 Verdcol® Yellow 110 PTR is a transparent and red shade yellow pigment with good durability. This product has an oil absorption of 45-50 g/100g and a density of 1.8-1.9 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. 收起 |
