| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展开 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展开 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| Hydroxyl Modified Ternary Copolymer Resin B-VAGH | Briture Co., Ltd. | Hydroxyl Modified Ternary Copolymer Resin B-VAGH is a hydroxyl modified ternary copolymer white powder of vinyl chloride, vinyl acetate and vinyl alcohol. This product improves paint performance, reinforces adhesive power, and has good solubility, flexibi...展开 Hydroxyl Modified Ternary Copolymer Resin B-VAGH is a hydroxyl modified ternary copolymer white powder of vinyl chloride, vinyl acetate and vinyl alcohol. This product improves paint performance, reinforces adhesive power, and has good solubility, flexibility, hardness, and chemical resistance. Hydroxyl Modified Ternary Copolymer Resin B-VAGH is used in industrial paint, repair paint, vessel paint, wood paint, steel board adhesives, varnish, and tape adhesive. 收起 | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...展开 ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...展开 ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. 收起 | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展开 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展开 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. 收起 | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. 收起 | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. 收起 | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. 收起 | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. 收起 | |
| Ruikang R-938 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturin...展开 Ruikang R-938 is a special rutile titanium dioxide pigment that is manufactured by organic surface treatments and ultrafine grinding. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is recommended to be used in automobile paints for high quality results. 收起 | |
| Ruikang R-998 | Xichang Ruikang Titanium Industry Co., Ltd. | Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coating...展开 Ruikang R-998 is a universal rutile titanium dioxide pigment. This product has excellent chalk resistance, excellent gloss retention, high tinting strength and gloss, and manufacturing consistency. It is used in a variety of applications including coatings and inks. 收起 | |
| Saturated Epoxy Resin E-12 | Briture Co., Ltd. | Saturated Epoxy Resin E-12 is a light yellow granular epoxy resin. This product has a softening point of 88 to 96°C. Saturated Epoxy Resin E-12 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-12 is a light yellow granular epoxy resin. This product has a softening point of 88 to 96°C. Saturated Epoxy Resin E-12 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Epoxy Resin E-14 | Briture Co., Ltd. | Saturated Epoxy Resin E-14 is a light yellow granular epoxy resin. This product has a softening point of 89 to 94°C. Saturated Epoxy Resin E-14 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-14 is a light yellow granular epoxy resin. This product has a softening point of 89 to 94°C. Saturated Epoxy Resin E-14 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Epoxy Resin E-20 | Briture Co., Ltd. | Saturated Epoxy Resin E-20 is a light yellow granular epoxy resin. This product has a softening point of 64 to 76°C. Saturated Epoxy Resin E-20 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive co...展开 Saturated Epoxy Resin E-20 is a light yellow granular epoxy resin. This product has a softening point of 64 to 76°C. Saturated Epoxy Resin E-20 is used in many coating including powder coatings, solid coatings, solvent-based coatings and anti-corrosive coatings. 收起 | |
| Saturated Polyester Resin P7030 | Briture Co., Ltd. | Saturated Polyester Resin P7030 is a clear light yellow carboxyl saturated polyester resin. This product has high gloss, good flow effect, mechanical properties, decorative effects, yellowing resistance and durability. Saturated Polyester Resin P7030 is u...展开 Saturated Polyester Resin P7030 is a clear light yellow carboxyl saturated polyester resin. This product has high gloss, good flow effect, mechanical properties, decorative effects, yellowing resistance and durability. Saturated Polyester Resin P7030 is used to produce hybrid powder coatings. 收起 | |
| Silane Coupling Agent 792 | Briture Co., Ltd. | Silane Coupling Agent 792 is a colorless to yellowish transparent liquid silane coupling agent. This product is an adhesion promoter for epoxy, MS polymer, RTV silicone and PVC-based sealants. Silane Coupling Agent 792 is also a component in primer system...展开 Silane Coupling Agent 792 is a colorless to yellowish transparent liquid silane coupling agent. This product is an adhesion promoter for epoxy, MS polymer, RTV silicone and PVC-based sealants. Silane Coupling Agent 792 is also a component in primer systems for hybrid, MS polymer and polyurethane sealants. 收起 | |
| Silane Coupling Agent BA-550 | Briture Co., Ltd. | Silane Coupling Agent BA-550 is a colorless transparent liquid that is completely and immediately soluble in water, alcohol, and aromatic and alip hatic hydrocarbons. This product improves adhesion and pigment dispersion. Silane Coupling Agent BA-550 is u...展开 Silane Coupling Agent BA-550 is a colorless transparent liquid that is completely and immediately soluble in water, alcohol, and aromatic and alip hatic hydrocarbons. This product improves adhesion and pigment dispersion. Silane Coupling Agent BA-550 is used in latex coatings, and adhesives. 收起 | |
| Silane Coupling Agent BA-560 | Briture Co., Ltd. | Silane Coupling Agent BA-560 is a colorless transparent liquid coupling agent. This product improves adhesion and mechanical strength. Silane Coupling Agent BA-560 is used in adhesives and epoxy sealing. | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展开 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展开 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow Brown | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow Brown is a Sulphur Dyestuff with a Color Index Number of Brown 10. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Yellow GC is a Sulphur Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Brown BR | UNIVERSAL DYECHEM PVT. LTD. | Univat Brown BR is a vat dyestuff with a Color Index of 1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Green FB | UNIVERSAL DYECHEM PVT. LTD. | Univat Green FB is a dyestuff with a Color Index Number of 1 and a Color Index Name of 42040:1. This product is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Grey 2B | UNIVERSAL DYECHEM PVT. LTD. | Univat Grey 2B is a vat dyestuff with a Color Index of Black 16. This product is used for cotton,viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Indigo Blue | UNIVERSAL DYECHEM PVT. LTD. | Univat Indigo Blue is a Vat Dyestuff with a Color Index Number of Indigo Blue 1. This product is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Khaki 2G | UNIVERSAL DYECHEM PVT. LTD. | Univat Khaki 2G is a Vat Dyestuff with a Color Index of Green 8. It is used for cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Olive R | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive R is a Vat Dyestuff with a Color Index Number of Black 27. It is used for cotton, viscose and linen fibers and as an additive in paints, coatings and inks. | |
| Univat Olive T | UNIVERSAL DYECHEM PVT. LTD. | Univat Olive T is a Vat Dyestuff with a Color Index Number of Black 25. It is used in cotton, viscose and linen fibers that has several different shades and as an additive in paints, coatings and inks. | |
| Univat Red 6B | UNIVERSAL DYECHEM PVT. LTD. | Univat Red 6B is a Vat Dyestuff with a Color Index Number of Red 13. It is a product used for cotton, viscose and linen fibers that has several different shades as well as an additive in paints, coatings and inks. | |
| Univat Violet 2R | UNIVERSAL DYECHEM PVT. LTD. | Univat Violet 2R is a Vat Dyestuff with a Color Index Number of Violet 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Univat Yellow GC | UNIVERSAL DYECHEM PVT. LTD. | Univat Yellow GC is a Vat Dyestuff with a Color Index Number of Yellow 2. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. |
