| α-Pyrrolidone | Shanghai WellTone Material Technology Co., Ltd. | α-Pyrrolidone is a colorless high boiling point polar solvent and also an organic synthetic intermediate product. As to this kind of solvent, it can be used to produce synthetic resin, pesticide, polyvalent alcohol, printing inks and iodine. | |
| APX-916 | Jiangsu Jingke Total Solution Co Ltd (JTS) | APX-916, in the form of a transparent, amber liquid, is a defoamer that can be used in water-based coatings and adhesives. This product has little odor and a pH between 3.0 and 7.0. | |
| APZ-85200 | Jiangsu Jingke Total Solution Co Ltd (JTS) | APZ-85200, in the form of a light yellow liquid, is an organic silicon defoamer that can be used in coating applications. This product has little odor and an emulsifiable solubility. | |
| ASCONIUM® 110 | ASCOTEC | ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats. | Request Sample |
| ASCONIUM® 111 | ASCOTEC | ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 112 | ASCOTEC | ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
| ASCONIUM® 130 | ASCOTEC | ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins. | Request Sample |
| ASCONIUM® 140 | ASCOTEC | ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins. | Request Sample |
| ASCONIUM® 141S1 | ASCOTEC | ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins. | Request Sample |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| ASCONIUM® 144DA | ASCOTEC | ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| 新 ASCONIUM® 500 | ASCOTEC | ASCONIUM® 500 is a liquid corrosion inhibitor for long-term protection of DTM clear coats or paints. It is VOC and heavy metal free, tailored for post addition and designed for water-based formulations based on acrylic, alkyd, epoxy, and PU binders. | Request Sample |
| ASCOTRAN® AL4 | ASCOTEC | ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the...展开 ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...展开 ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® H14 | ASCOTEC | ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and...展开 ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...展开 ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® H18 | ASCOTEC | ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during dryin...展开 ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® H30 | ASCOTEC | ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...展开 ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRAN® HPB | ASCOTEC | ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and a...展开 ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). 收起 | Request Sample |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| ASCOTRUST® X2 | ASCOTEC | ASCOTRUST® X2 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne clear coatings to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...展开 Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| N-Methyl-Pyrrolidone | Shanghai WellTone Material Technology Co., Ltd. | N-Methyl-Pyrrolidone is a 99.5% pure chemical raw ingredient in a colorless liquid form. This is a solvent of resin processing in the manufacture of coatings, lacquer for floor, varnish, compound coating filming, enameled wire of IC, fiber fabrics and ad...展开 N-Methyl-Pyrrolidone is a 99.5% pure chemical raw ingredient in a colorless liquid form. This is a solvent of resin processing in the manufacture of coatings, lacquer for floor, varnish, compound coating filming, enameled wire of IC, fiber fabrics and adhesives. It may also be used as an industrial-use detergent in the cleaning of chemical equipments, stem, adhesive material and coatings etc. 收起 | |
| N-Octyl-Pyrrolidone | Shanghai WellTone Material Technology Co., Ltd. | N-Octyl-Pyrrolidone is a 99% pure chemical raw ingredient in a clear, light yellow-colored liquid form. It is used as a solvent in chemical reactions, components in ink and coating formulations and as a coating stripper in the electronic industry. | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...展开 PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...展开 PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...展开 PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...展开 PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...展开 PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...展开 PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...展开 PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...展开 PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...展开 PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...展开 PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. |
