| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...展开 Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...展开 Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...展开 Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. 收起 | |
| CI Pigment Orange 20 (77202) | James M. Brown Ltd. | CI Pigment Orange 20 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as an orange coloring in artists' color and ceramic coating applications. | |
| CI Pigment Red 108 (77202) | James M. Brown Ltd. | CI Pigment Red 108 (77202) is a pigment based on a cadmium sulphoselenide system. This product is most commonly used as a red coloring in artists' color and ceramic coating applications. | |
| CI Pigment White 21 (77120) | James M. Brown Ltd. | CI Pigment White 21 (77120) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a white coloring in artists' color and ceramic coating applications. | |
| CI Pigment Yellow 35 (77205) | James M. Brown Ltd. | CI Pigment Yellow 35 (77205) is a pigment based on a solid solution of cadmium zinc sulphide. This product is most commonly used as a yellow coloring in artists' color and ceramic coating applications. | |
| Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...展开 Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...展开 Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...展开 Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...展开 Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...展开 Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...展开 Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...展开 Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...展开 Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...展开 H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. 收起 | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...展开 H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. 收起 | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...展开 H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. 收起 | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...展开 H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. 收起 | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...展开 H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. 收起 | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...展开 Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. 收起 | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...展开 Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. 收起 | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...展开 Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. 收起 | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...展开 Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...展开 MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...展开 MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...展开 MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...展开 MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...展开 MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...展开 MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
| MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
| MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...展开 MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...展开 MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...展开 MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...展开 MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
| MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Fluo Red, VPA 596 | mk chemicals | MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
| MK-Hydrocolor Bismuth Vanadate Yellow | mk chemicals | MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments tha...展开 MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Black 7, VPA 26 | mk chemicals | MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that ar...展开 MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Black P. Bk. 7, VPA 344/12 | mk chemicals | MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Blue 15:1 | mk chemicals | MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 | mk chemicals | MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are ...展开 MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Chromium Oxide Green | mk chemicals | MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...展开 MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
| MK-Hydrocolor Green 7 | mk chemicals | MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paint...展开 MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Green GN P. G. 17, VPA 344/20 | mk chemicals | MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Green P. G. 7, VPA 344/21 | mk chemicals | MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are use...展开 MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Black 306 | mk chemicals | MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Black 318 | mk chemicals | MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Red 110 | mk chemicals | MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Red 130 | mk chemicals | MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Red 160 | mk chemicals | MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Yellow 3910 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Iron Oxide Yellow 3920 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Orange 34 | mk chemicals | MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Orange 5 | mk chemicals | MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Orange 943, VPA 344/23/1 | mk chemicals | MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Orange P. O. 67, VPA 344/28 | mk chemicals | MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Red 112 | mk chemicals | MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Red 130 M, VPA 344/19 | mk chemicals | MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in c...展开 MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Red 146 | mk chemicals | MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
| MK-Hydrocolor Red P. R. 112, VPA 437/4 | mk chemicals | MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used i...展开 MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Red P. R. 122, VPA 344/26 | mk chemicals | MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Red P. R. 170, VPA 344/22 | mk chemicals | MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
| MK-Hydrocolor Tinting Black WD, VPA 26 | mk chemicals | MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
| MK-Hydrocolor Tiosorb WD, VPA 78 | mk chemicals | MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium diox...展开 MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium dioxide pigments that are used in wood stain coatings as an U.V. absorber. 收起 | |
| MK-Hydrocolor Transoxide Orange WD | mk chemicals | MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
| MK-Hydrocolor Transoxide Red WD | mk chemicals | MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
| MK-Hydrocolor Transoxide Yellow WD | mk chemicals | MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
| MK-Hydrocolor Violet 23 | mk chemicals | MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 |
