| Acid Casein - Mesh 100 | Kaskat Ltd | Acid Casein - Mesh 100 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 100 is used as...展开 Acid Casein - Mesh 100 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 100 is used as an emulsifier and as an economical substitute for milk and whey protein concentrate, specifically for uses in processed and hard cheeses, glazing agent for bakery products, and meat sauces. 收起 | |
| Acid Casein - Mesh 30 | Kaskat Ltd | Acid Casein - Mesh 30 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 30 is used as a...展开 Acid Casein - Mesh 30 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 30 is used as an emulsifier and as an economical substitute for milk and whey protein concentrate, specifically for uses in processed and hard cheeses, glazing agent for bakery products, and meat sauces. 收起 | |
| Acid Casein - Mesh 60 | Kaskat Ltd | Acid Casein - Mesh 60 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 60 is used as a...展开 Acid Casein - Mesh 60 is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of continued casein coagulation from accurately skimmed milk under the influence of sour whey. Acid Casein - Mesh 60 is used as an emulsifier and as an economical substitute for milk and whey protein concentrate, specifically for uses in processed and hard cheeses, glazing agent for bakery products, and meat sauces. 收起 | |
| Anhydrous Milk Fat | Kaskat Ltd | Anhydrous Milk Fat is obtained from pasteurized cream by almost total elimination of water and non fatty solids. This product is available as a yellow liquid or solid free from abnormal flavors with a pure and clean odor. It is applied in recombined dairy...展开 Anhydrous Milk Fat is obtained from pasteurized cream by almost total elimination of water and non fatty solids. This product is available as a yellow liquid or solid free from abnormal flavors with a pure and clean odor. It is applied in recombined dairy products, confectionery, bakery and pastry, ice cream, sauces and spreads mixing well with other products as a great source of pure milkfat to give a natural dairy flavor and creaminess and easily mixes with other products. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| Calcium Caseinate | Kaskat Ltd | Calcium Caseinate is a white to yellowish free flowing powder with a typical milky taste and smell without a foreign odor. It is obtained through performance of extrusion process of acid casein i.e. dissolving casein and processing in 135 °C for 15 second...展开 Calcium Caseinate is a white to yellowish free flowing powder with a typical milky taste and smell without a foreign odor. It is obtained through performance of extrusion process of acid casein i.e. dissolving casein and processing in 135 °C for 15 seconds. Calcium Caseinate is used as an emulsifier and WPC replacer, specifically for use in the bakery and confectionery industry, hard and processed cheeses, food and pharmaceutical concentrates, drinks and dietetic products, and ice creams and whipped toppings. 收起 | |
| Demineralized Whey Powder | Kaskat Ltd | Demineralized Whey Powder is a white to yellowish free flowing powder with a milky taste and smell without foreign odor. It is manufactured by removal of water from liquid sweet whey which is the main by-product from hard cheese production. Demineralized ...展开 Demineralized Whey Powder is a white to yellowish free flowing powder with a milky taste and smell without foreign odor. It is manufactured by removal of water from liquid sweet whey which is the main by-product from hard cheese production. Demineralized Sweet Whey is used as an emulsifier and economical substitute of milk solids in the food and beverage industry, specifically for uses in infant foods, dairy products, dairy blends, wet blends, bakery products, pasta sauces, chocolates, confectioneries, and ice creams. 收起 | |
| Full Cream Milk Powder | Kaskat Ltd | Full Cream Milk Powder is a white to yellowish free flowing powder with a milky taste and smell without foreign odor. It is obtained during the process of dehydration of homogenized whole milk. Full Cream Milk Powder is used as an emulsifier in the food a...展开 Full Cream Milk Powder is a white to yellowish free flowing powder with a milky taste and smell without foreign odor. It is obtained during the process of dehydration of homogenized whole milk. Full Cream Milk Powder is used as an emulsifier in the food and beverage industry, specifically for confectionery, milk chocolate, bakery, beverage whiteners, ice cream, chocolate drinks, yogurts, and frozen foods. 收起 | |
| Haicel® CMC 1000HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 1000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (1% Brookfield). It...展开 Haicel® CMC 1000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices and instant noodles. 收起 | |
| Haicel® CMC 1000MF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 1000MF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 500-2000 Cps (2% Brookfield). It...展开 Haicel® CMC 1000MF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 500-2000 Cps (2% Brookfield). It is widely used as a thickener and stabilizer in fruit juices and yogurts. 收起 | |
| Haicel® CMC 1500HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 1500HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1200-1500 Cps (1% Brookfield). I...展开 Haicel® CMC 1500HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1200-1500 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices, yogurt, and instant noodles. 收起 | |
| Haicel® CMC 1800HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 1800HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1500-2000 Cps (1% Brookfield). I...展开 Haicel® CMC 1800HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1500-2000 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices, yogurt, and instant noodles. 收起 | |
| Haicel® CMC 2000HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 2000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 2000-3000 Cps (1% Brookfield). I...展开 Haicel® CMC 2000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 2000-3000 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in soft drinks and bakery products. 收起 | |
| Haicel® CMC 20LF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 20LF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 25-50 Cps (2% Brookfield). It is w...展开 Haicel® CMC 20LF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 25-50 Cps (2% Brookfield). It is widely used as a thickener and stabilizer in fruit juices. 收起 | |
| Haicel® CMC 3000HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 3000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 3000-4000 Cps (1% Brookfield). I...展开 Haicel® CMC 3000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 3000-4000 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in bakery products. 收起 | |
| Haicel® CMC 300HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 300HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 200-400 Cps (1% Brookfield). It i...展开 Haicel® CMC 300HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 200-400 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices and milk. 收起 | |
| Haicel® CMC 4000HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 4000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 4000-5000 Cps (1% Brookfield). I...展开 Haicel® CMC 4000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 4000-5000 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in bakery products and meat products. 收起 | |
| Haicel® CMC 5000HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 5000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 5000-6000 Cps (1% Brookfield). I...展开 Haicel® CMC 5000HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 5000-6000 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in bakery products and meat products. 收起 | |
| Haicel® CMC 500HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 500HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 400-600 Cps (1% Brookfield). It i...展开 Haicel® CMC 500HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 400-600 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices. 收起 | |
| Haicel® CMC 500MF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 500MF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 100-500 Cps (2% Brookfield). It i...展开 Haicel® CMC 500MF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 100-500 Cps (2% Brookfield). It is widely used as a thickener and stabilizer in soft drinks. 收起 | |
| Haicel® CMC 50LF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 50LF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 50-100 Cps (2% Brookfield). It is ...展开 Haicel® CMC 50LF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 50-100 Cps (2% Brookfield). It is widely used as a thickener and stabilizer in fruit juices and soft drinks. 收起 | |
| Haicel® CMC 700HF | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC 700HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 600-800 Cps (1% Brookfield). It i...展开 Haicel® CMC 700HF is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 600-800 Cps (1% Brookfield). It is widely used as a thickener and stabilizer in fruit juices and ice cream. 收起 | |
| Haicel® CMC FH6 | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC FH6 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (NDJ-79, 2%). It is wi...展开 Haicel® CMC FH6 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (NDJ-79, 2%). It is widely used as a thickener and stabilizer in ice cream. 收起 | |
| Haicel® CMC FH9 | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC FH9 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (NDJ-79, 2%). It is wi...展开 Haicel® CMC FH9 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 800-1200 Cps (NDJ-79, 2%). It is widely used as a thickener and stabilizer in fruit juices, yogurts, milk, etc. 收起 | |
| Haicel® CMC FVH6 | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC FVH6 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1800-2200 Cps (NDJ-79, 2%). It is ...展开 Haicel® CMC FVH6 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1800-2200 Cps (NDJ-79, 2%). It is widely used as a thickener and stabilizer in ice cream, meat products, and bakery products. 收起 | |
| Haicel® CMC FVH9 | Zibo Hailan Chemical Co., Ltd. | Haicel® CMC FVH9 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1800-2200 Cps (NDJ-79, 2%). It is ...展开 Haicel® CMC FVH9 is a gum that is water-soluble cellulose ether manufactured by reacting sodium monochloroacetate with alkali cellulose to form sodium carboxymethylcellulose. This product has a viscosity of approximately 1800-2200 Cps (NDJ-79, 2%). It is widely used as a thickener and stabilizer in fruit juices, yogurts, milk, etc. 收起 | |
| Haixan® F200-Xanthan Gum Food Grade 200 Mesh | Zibo Hailan Chemical Co., Ltd. | Haixan® F200-Xanthan Gum Food Grade 200 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 100% through 80 mesh and 92% minimum through 200 mesh. It ...展开 Haixan® F200-Xanthan Gum Food Grade 200 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 100% through 80 mesh and 92% minimum through 200 mesh. It is used as a stabilizer, thickener, or emulsifier in baked goods, beverages, and salad dressings. 收起 | |
| Haixan® F40-Xanthan Gum Food Grade 40 Mesh | Zibo Hailan Chemical Co., Ltd. | Haixan® F40-Xanthan Gum Food Grade 40 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 98% minimum through 42 mesh and 10% maximum through 200 mesh...展开 Haixan® F40-Xanthan Gum Food Grade 40 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 98% minimum through 42 mesh and 10% maximum through 200 mesh. It is used as a stabilizer, thickener, or emulsifier in baked goods, salad dressings, and beverages. 收起 | |
| Haixan® F80-Xanthan Gum Food Grade 80 Mesh | Zibo Hailan Chemical Co., Ltd. | Haixan® F80-Xanthan Gum Food Grade 80 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 100% through 60 mesh and 95% minimum through 80 mesh. It is ...展开 Haixan® F80-Xanthan Gum Food Grade 80 Mesh appears as a cream colored powder that is produced by the fermentation of carbohydrate with Xanthomonas campestris. This product has a particle size of 100% through 60 mesh and 95% minimum through 80 mesh. It is used as a stabilizer, thickener, or emulsifier in salad dressings, baked goods, beverages, etc. 收起 | |
| Lactic Butter | Kaskat Ltd | Lactic Butter is a deep yellow to nearly white emulsion made from pasteurized, aged, and ripened milk by churning, draining buttermilk, washing, working, and forming. It is very nutritious, has a long shelf life in right conditions, is an alternative to c...展开 Lactic Butter is a deep yellow to nearly white emulsion made from pasteurized, aged, and ripened milk by churning, draining buttermilk, washing, working, and forming. It is very nutritious, has a long shelf life in right conditions, is an alternative to cooking oil, imparts a natural and unique flavor and improves moisture retention. It is generally used as a spread and a condiment, as well as in cooking, such as baking, sauce making, and pan frying. 收起 | |
| Lactose | Kaskat Ltd | Lactose is a free flowing powder manufactured from fresh pasteurized sweet whey through membrane filtering, crystallization, refining and drying processes. It is used in the food and beverage industry as an added source of energy for newborns, cost reduce...展开 Lactose is a free flowing powder manufactured from fresh pasteurized sweet whey through membrane filtering, crystallization, refining and drying processes. It is used in the food and beverage industry as an added source of energy for newborns, cost reducer, and a flavor fixer. Specifically, Lactose is used in confectioneries, milk chocolates, bakery products, beverage whiteners, ice creams, chocolate drinks, yogurts, frozen foods, and drinks. 收起 | |
| Milk Protein Concentrate | Kaskat Ltd | Milk Protein Concentrate is a white to yellowish free flowing powder with a milky taste and smell. It is obtained from skim milk by a process that includes removing a portion of the lactose and minerals using ultra-filtration, then evaporation and drying....展开 Milk Protein Concentrate is a white to yellowish free flowing powder with a milky taste and smell. It is obtained from skim milk by a process that includes removing a portion of the lactose and minerals using ultra-filtration, then evaporation and drying. Milk Protein Concentrate is used as an emulsifier in the food and beverage industry, specifically for uses in nutritional and dietary products, geriatric nutritional products, recombined and processed cheeses, bakery and confection products, and processed meat. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展开 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展开 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| Skimmed Milk Powder | Kaskat Ltd | Skimmed Milk Powder is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of dehydration of pasteurized skimmed milk. Skimmed Milk Powder is used as an emulsifier in dairy foods, specifically for UHT milk,...展开 Skimmed Milk Powder is a white to yellowish free flowing powder with a milky taste and smell. It is obtained during process of dehydration of pasteurized skimmed milk. Skimmed Milk Powder is used as an emulsifier in dairy foods, specifically for UHT milk, cultured yogurts, desserts, recombined sweetened and evaporated milk, dry mixes, bakery, confectionery, and meat products. 收起 | |
| Sodium Caseinate | Kaskat Ltd | Sodium Caseinate is a white to yellowish free flowing powder with a milky taste and smell. It is obtained through performance of extrusion process of acid casein i.e. dissolving casein and processing in 135°C for 15 seconds. Sodium Caseinate is used as an...展开 Sodium Caseinate is a white to yellowish free flowing powder with a milky taste and smell. It is obtained through performance of extrusion process of acid casein i.e. dissolving casein and processing in 135°C for 15 seconds. Sodium Caseinate is used as an emulsifier, specifically for use in food supplements (baby food and sports nutrition), coffee creamers, drinks and dietetic products, the meat industry, and processed and hard cheeses. 收起 | |
| Sweet Butter | Kaskat Ltd | Sweet Butter is a deep yellow to nearly white emulsion made from pasteurized, aged, and ripened milk by churning, draining buttermilk, washing, working, and forming. It is very nutritious, has a long shelf life in right conditions, is an alternative to co...展开 Sweet Butter is a deep yellow to nearly white emulsion made from pasteurized, aged, and ripened milk by churning, draining buttermilk, washing, working, and forming. It is very nutritious, has a long shelf life in right conditions, is an alternative to cooking oil, imparts a natural and unique flavor and improves moisture retention. It is generally used as a spread and a condiment, as well as in cooking, such as baking, sauce making, and pan frying. 收起 | |
| Sweet Whey Powder | Kaskat Ltd | Sweet Whey Powder is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by removal of water from liquid sweet whey which is the main by-product from hard cheese production. Sweet Whey Powder is used as an emulsifier ...展开 Sweet Whey Powder is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by removal of water from liquid sweet whey which is the main by-product from hard cheese production. Sweet Whey Powder is used as an emulsifier and economical substitute of milk solids in the food and beverage industry, specifically for uses in bakery products, process cheeses, frozen desserts, sauces, meat emulsions, confectioneries, soups, ice creams, and pasta sauces. 收起 | |
| Whey Permeate | Kaskat Ltd | Whey Permeate, also known as deproteinized whey, is the by-product of the production of whey protein concentrates. It is a white to yellowish free flowing powder with a typical milk taste and smell. Whey permeate is used in the food and beverage industry ...展开 Whey Permeate, also known as deproteinized whey, is the by-product of the production of whey protein concentrates. It is a white to yellowish free flowing powder with a typical milk taste and smell. Whey permeate is used in the food and beverage industry for its richness in lactose and mineral salts and reduction of cost. Specifically, it is used for application in biscuits, bakery products, drinks, and confectionery. 收起 | |
| Whey Protein Concentrate 34/35 | Kaskat Ltd | Whey Protein Concentrate 34/35 is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by drying the material resulting from removal of sufficient non-protein constituents from pasteurized whey. Whey Protein Concentrat...展开 Whey Protein Concentrate 34/35 is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by drying the material resulting from removal of sufficient non-protein constituents from pasteurized whey. Whey Protein Concentrate 34/35 is used as a skimmed milk replacer and as an alternative to egg-whites in the food and beverage industry. Specifically it is used in nutritional and protein fortified beverages, bakery products, processed meats, dietetic foods, infant foods, and confections. 收起 | |
| Whey Protein Concentrate 80 | Kaskat Ltd | Whey Protein Concentrate 80 is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by drying the material resulting from removal of sufficient non-protein constituents from pasteurized whey. Whey Protein Concentrate 8...展开 Whey Protein Concentrate 80 is a white to yellowish free flowing powder with a milky taste and smell. It is manufactured by drying the material resulting from removal of sufficient non-protein constituents from pasteurized whey. Whey Protein Concentrate 80 is used as a skimmed milk replacer and as an alternative to egg-whites in the food and beverage industry. Specifically, it is used in nutritional and protein fortified beverages, bakery products, processed meats, dietetic foods, infant foods, and confections. 收起 |
