| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展开 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展开 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展开 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展开 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展开 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| Pigment Red 146 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Red 146 is a blue-red shaded pigment that has a density of 1.4 g/cm3 and heat resistance of 180°C. This product is commonly used in inks, paints, and coatings. | |
| Pigment Yellow 83 | Gaoyou Huabao Pigment Co., Ltd. | Pigment Yellow 83 is a red-yellow shaded pigment that has a density of 1.5 g/cm3 and heat resistance of 250°C. This product is often used in paints and inks. | |
| Superfast™ Orange GPP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solv...展开 Superfast™ Orange GPP is a yellow shaded orange pigment that is partially transparent and has high color strength. It has a density of 1.4-1.6 g/M2 and a heat resistance of 290-300°C. This product is commonly used to offer excellent heat stability in solvent-based inks and industrial paints. 收起 | |
| Superfast™ Pink EP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coat...展开 Superfast™ Pink EP is a blue shaded pink pigment that is partially transparent and has high color strength. It has a density of 10-12 g/M2 and a heat resistance of 290-300°C. This product is commonly used in decorative paints, industrial paints, coil coatings, powder coatings, and offset inks. 收起 | |
| Superfast™ Red HF4C | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial ...展开 Superfast™ Red HF4C is a yellow shaded red pigment that is partially transparent and has high color strength. It has a density of 1.4 g/M2 and heat resistance of 250°C. This product is commonly used in decorative paints, solvent-based inks and industrial paints. 收起 | |
| Superfast™ Violet RL | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coa...展开 Superfast™ Violet RL is a brilliant and very strong violet pigment that has very high fastness levels. It has a density of 1.50 g/cm3 and heat resistance of 280-300°C. This product is used in decorative paints, industrial paints, coil coatings, powder coatings, water-based inks, and offset inks. 收起 | |
| Superfast™ Yellow H4G | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibilit...展开 Superfast™ Yellow H4G is a greenish yellow pigment that is partially transparent and has high light resistance. It has a density of 1.4-1.6 g/m2 and heat resistance of 250-280°C. This product is used to offer light resistance and exceptional dispersibility in solvent-based inks and paints, offset inks, and industrial paints. 收起 | |
| Superfast™ Yellow HGP | Gaoyou Huabao Pigment Co., Ltd. | Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative pain...展开 Superfast™ Yellow HGP is a greenish yellow pigment that is partially transparent and has high color strength. It has a density of 1.46 g/M2 and heat resistance of 260-280°C. This product is used in solvent-based industrial paints and inks, decorative paints, and offset inks. 收起 | |
| Vat Brilliant Violet RR | Chongqing Changfeng Chemical Co., Ltd. | Vat Brilliant Violet RR (Vat Violet 1) is a violet-brown powder which can be used in ink for printing on cotton fabrics. | |
| Vat Dark Blue BO | Chongqing Changfeng Chemical Co., Ltd. | Vat Dark Blue BO (Vat Blue 20) is a blue-violet powder which can be used in ink for printing on cotton fabrics. | |
| Vat Olive Green B | Chongqing Changfeng Chemical Co., Ltd. | Vat Olive Green B (Vat Green 3) is a dark green powder which can be used in ink for printing on cotton fabrics. | |
| Vat Olive T | Chongqing Changfeng Chemical Co., Ltd. | Vat Olive T (Vat Black 25) is a black-brown powder which can be used in ink for printing on cotton fabrics. | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展开 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展开 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
| VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展开 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展开 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展开 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
| VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
| VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
| VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
| VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展开 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |
