Aliphatic 6/15 | Braskem S.A. | Aliphatic 6/15 is an aliphatic solvent. | |
Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
Dicyclopentadiene | Braskem S.A. | Dicyclopentadiene is a colorless hydrocarbon liquid. | |
Ezolem 6/13 | Braskem S.A. | Ezolem 6/13 is a solvent for rubber. | |
Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...展開 UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...展開 UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展開 UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...展開 UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. 收起 | |
Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展開 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展開 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® DPP Red 254 PTR | Verdcol Ltd | Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative c...展開 Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, water based inks, and solvent based inks. 收起 | |
Verdcol® Pink 122 GP | Verdcol Ltd | Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial...展開 Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial coatings, water based inks, and solvent based inks. 收起 | |
Verdcol® Red 169 W | Verdcol Ltd | Verdcol® Red 169 W is a bright pink pigment with high transparency. This product has an oil absorption of 100-105 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
Verdcol® Red 81 S | Verdcol Ltd | Verdcol® Red 81 S is a bright pink color with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® Red 81 W | Verdcol Ltd | Verdcol® Red 81 W is a bright pink pigment with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
Verdcol® Violet 27 W | Verdcol Ltd | Verdcol® Violet 27 W is an economical pigment with good flow stability. This product has an oil absorption of 45-55 g/100g and a density of 1.6-1.7 g/cm3. It is primarily used in water based inks. | |
Verdcol® Violet 3 S | Verdcol Ltd | Verdcol® Violet 3 S is a brilliant red pigment with high transparency. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
Verdcol® Violet 3 W | Verdcol Ltd | Verdcol® Violet 3 W is a brilliant and red shade pigment with transparent qualities. This product has an oil absorption of 65-75 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
VISIOMER® 1,4-BDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers...展開 VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent for the free radical polymerization, and as adhesion promoter and hardener for PVC plastisols, and a coagent for peroxide crosslinking of elastomers. 收起 | |
VISIOMER® 1,6-HDDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® 1,6-HDDMA is a hydrophobic dimethacrylate. Ideal for use as crosslinker for sealants, adhesives, inks, photopolymer plates and dental compounds. | |
VISIOMER® AMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid...展開 VISIOMER® AMA is a clear, colorless liquid with a pungent odor. Allyl methacrylate offers exceptional performance with two double bonds of different reactivity, allowing graft copolymerization in emulsions. It is used as a crosslinker, comonomer for rigid plastics, graft crosslinker and base product for the manufacture of silanes. 收起 | |
VISIOMER® BDGMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® BDGMA is a monofunctional "label-free"methacrylate monomer with ether functionality. It has a very low Tg and is therefore an excellent plasticizing monomer, e.g. in emulsions | |
VISIOMER® c-HMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® c-HMA is a clear, colorless hydrophobic methacrylate monomer that can be used for polymer synthesis. It is ideal for use in the paint, adhesive, leather, paper and textile industries. | |
VISIOMER® C18 PEG 1105 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA. It consist of a hydrophylic backbone with side chains that end in a hydrophobic group . Ideal for use as associative polymeric thickener in emulsion polymers. | |
VISIOMER® DMAPMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® DMAPMA is an amino functional methacrylate monomer that is used to improve pigment wetting and substrate adhesion to polymers. Suggested applications include paints and coatings, paper and water and cosmetic applications. | |
VISIOMER® EGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EGDMA is a low viscosity dimethacrylate monomer. It is ideal for use as a crosslinking agent to improve hardness and mechanical properties in plastics and adhesives, and a coagent for peroxide crosslinking of elastomers. | |
VISIOMER® EHMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EHMA is hydrophobic methacrylate monomer with low Tg. Used as flexibilizer and internal plasticizer. It is also an excellent co-monomer in coatings and adhesive applications. | |
VISIOMER® IDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® IDMA is a hydrophobic methacrylate monomer with very low Tg. It is for use as a co-monomer in adhesives, sealants and paint resins. | |
VISIOMER® MAAmide | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MAAmide is a colorless, solid, crystalline with very high Tg . It is a special monomer for thermosetting paints and self-crosslinking emulsions. | |
VISIOMER® MADAME™ | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MADAME™ is a monofunctional methacrylate with a tertiary amino group in the side chain. Ideal for improving adhesion of formulations. Also used for the preparation of cationic polymers, especially quaternary ammonium polymers and flocculants. | |
VISIOMER® MEEU 25 M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 25 M is an ureido methacrylate 25% in MMA. Used to impart wet adhesion and wet scrub resistance to solvent based polymers. | |
VISIOMER® MEEU 50 W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MEEU 50 W is an ureido methacrylate 50% in water. It is designed to improve wet adhesion properties of emulsion polymers and wet scrub resistance of the final products. | |
VISIOMER® MPEG 750 MA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MPEG 750 MA W is a highly polar monomer (50% in water) with excellent water solubility. Used as co-polymerizable emulsifier to stabilize latex polymer systems e.g. emulsion. | |
VISIOMER® THFMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® THFMA is a low viscosity, low odor mono methacrylate monomer that impacts flexibility and adhesion to adhesive applications. Due to its low volatility, it can be used as reactive diluent for reactive systems, e.g. adhesives | |
VISIOMER® TMPTMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TMPTMA is a trifunctional methacrylate monomer. It is ideal for use as a crosslinking agent in free radical polymerization, as adhesion promoter and hardener for PVC plastisol, and coagent for peroxide crosslinking of elastomers. | |
VISIOMER® TRGDMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® TRGDMA is a low viscosity dimethacrylate monomer that is ideal for use as a crosslinking agent for free radical polymerization, adhesion promoter and hardener for PVC plastisols, and component in reactive resins. | |
VISIOMER®Terra C13-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C13-MA is a hydrophobic methacrylate monomer with very low Tg. It is ideal for use as flexibilizer and internal plasticizer. | |
VISIOMER®Terra C17,4-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C17,4-MA is a hydrophobic methacrylate monomer with low Tg . It can be used as flexibilizer and internal plasticizer in coatings and reactive resins applications. | |
VISIOMER®Terra IBOMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra IBOMA is bulky side chain alkyl methacrylate monomer with very high Tg. It provide polymers with reduced viscosity , thus allowing a higher solids content. Suggested applications include coatings and adhesive applications. | |
White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. |