| A-2468 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry. | |
| A-6205 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits. | |
| A-6571FG Aluminum Paste | Silberline Manufacturing Co., Inc. | A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings. | |
| AQUA PASTE® 055-C33 | Silberline Manufacturing Co., Inc. | AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness. | |
| AQUASIL® BP 3500 Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...展開 AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. 收起 | |
| Aquavex® AD 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially f...展開 Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Aquavex® AD 015 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially ...展開 Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® L Premier 021 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...展開 AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...展開 AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 013 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...展開 AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 028 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...展開 AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Dynoadd® D-960 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment w...展開 Dynoadd® D-960 is a non-ionic, structured polymeric dispersing agent with excellent pigment affinity and effective steric stabilization, particularly suitable for the dispersion of carbon black in aqueous media. Dynoadd D-960 gives rapid initial pigment wetting and deflocculation giving stable dispersions with low particle size. Pigment dispersions produced using Dynoadd D-960 have low viscosity and give excellent color strength, stability, and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-962 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...展開 Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® D-963 | Dynoadd by Dynea 太尔化工 | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...展開 Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. 收起 | |
| Dynoadd® F-1 | Dynoadd by Dynea 太尔化工 | Dynoadd F-1是一種用於溶劑型涂料的一般用途的流動性、流平和抗縮孔添加劑。它可以降低涂料配方的表面張力，從而提高基材的潤濕性，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-100 | Dynoadd by Dynea 太尔化工 | Dynoadd F-100是一種流動性和潤濕添加劑，與溶劑型涂料的相容性高。它可以降低配方的表面張力，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-101 | Dynoadd by Dynea 太尔化工 | Dynoadd F-101是一種流平添加劑，適用於包括UV涂料在內的極性體系。它可以降低非溶劑型和溶劑型涂料的表面張力，從而提高基材的潤濕性，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-102 | Dynoadd by Dynea 太尔化工 | Dynoadd F-102是一種流動性和流平添加劑，用於溶劑型體系時具有防泡沫的特性。由於其分子量和化學組成的關系，Dynoadd F-102在流動性和消泡沫性方面做到了良好的平衡，廣泛用於各種配方。 | |
| Dynoadd® F-106 | Dynoadd by Dynea 太尔化工 | 透明塗料的防縮孔助劑，具有高DOI | |
| Dynoadd® F-113 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 c...展開 Dynoadd® F-113 is a silicone-free, flow, and leveling additive for solvent-based heat set topcoat formulations. By creating a surface layer with high cross-linking density, F-113 reduces dirt pickup and increases anti-blocking properties. Dynoadd® F-113 can improve protective film release and, in some cases, anti-graffiti properties. Surface defects such as orange peel, craters, and popping are eliminated. 收起 | |
| Dynoadd® F-200 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....展開 Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. 收起 | |
| Dynoadd® F-201ND | Dynoadd by Dynea 太尔化工 | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flo...展開 Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. 收起 | |
| Dynoadd® F-300 | Dynoadd by Dynea 太尔化工 | Dynoadd F-300是一種可以與食品接觸的流動性和潤濕添加劑，適用於溶劑型涂料。它能夠降低配方的表面張力，避免縮孔、收縮、桔皮和針孔等表面缺陷。 | |
| Dynoadd® F-3B | Dynoadd by Dynea 太尔化工 | Dynoadd F-3B是一種可以與食品接觸的流動性和抗縮孔添加劑，適用於溶劑型涂料。它能夠降低配方的表面張力，提高基材的潤濕性，避免縮孔、收縮和針孔等表面缺陷。 | |
| Dynoadd® F-404 | Dynoadd by Dynea 太尔化工 | Dynoadd F-404是一種硅氧烷改性流動性和流平添加劑，可以有效地控制溶劑型涂料的表面張力，用於噴涂涂料時具有出色的流動性、流平性和抗過噴縮孔的性能。 | |
| Dynoadd® F-409 | Dynoadd by Dynea 太尔化工 | 用於紫外固化體系的流平、流動和光澤助劑 | |
| Dynoadd® F-414 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...展開 Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. 收起 | |
| Dynoadd® F-461 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...展開 Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. 收起 | |
| Dynoadd® F-462 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | |
| Dynoadd® F-470 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-470可以減少滯留氣泡、針孔和表面氣泡。防止在生產和施工過程中產生氣泡。特別適合較厚的涂層，比如地坪涂料、使用雙組分環氧、不飽和聚脂和聚氨酯的鑄膜體系。Dynoadd® F-470對透明度沒有影響，推薦用於透明配方體系。Dynoadd® F-470還有低量的氟聚合物。 | |
| Dynoadd® F-601 | Dynoadd by Dynea 太尔化工 | Dynoadd F-601是一種用於水性配方的基材潤濕和流平添加劑。添加Dynoadd F-601后可以提高基材的潤濕性、流動性和流平性。避免或最大限度地減少縮孔、針孔、白點和其它表面缺陷。 | |
| Dynoadd® F-606 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...展開 Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. 收起 | |
| Dynoadd® F-608 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...展開 Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. 收起 | |
| Dynoadd® F-701B | Dynoadd by Dynea 太尔化工 | DYNOADD® F -701B是一種高效聚合物添加劑，對空氣釋放和抗氣泡特別有效。它可控制溶劑型塗料的表面張力。少量添加即有助於提高流動性，減少表面缺陷，例如縮孔、桔皮和針孔。該產品與許多蠟乳液具有良好的相容性，用於高蠟含量塗料中具有良好的性能。DYNOADD® F -701B可以結合Dynoadd®流動添加劑，特別是Dynoadd ®F -101使用。 | |
| Dynoadd® F-705 | Dynoadd by Dynea 太尔化工 | Dynoadd F-705是一種高效的防泡沫非硅樹脂聚合濃縮物，用於溶劑型和UV配方。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| Dynoadd® F-706 | Dynoadd by Dynea 太尔化工 | Dynoadd F-706是一種非硅樹脂聚合型防泡沫和脫氣添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。對涂料外觀沒有消極影響。 | |
| Dynoadd® F-707 | Dynoadd by Dynea 太尔化工 | Dynoadd F-707是一種用於溶劑型涂料的非硅樹脂聚合型防泡沫添加劑。能夠有效防止泡沫的生成，且對脫氣特別有效，因而可以防爆裂。它可以控制溶劑型體系的表面張力。少量添加有助於提高流動性，減少縮孔和桔皮等表面缺陷。 | |
| Dynoadd® F-711 | Dynoadd by Dynea 太尔化工 | 消泡劑和脫氣劑，適用於修補漆和一般工業漆 | |
| Dynoadd® F-713 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-713可以減少VOC為零或很低的配方體系中的滯留氣泡、針孔和表面氣泡。特別適合較厚的涂層，比如地坪涂料、使用雙組分環氧、不飽和聚脂和聚氨酯的鑄膜體系。Dynoadd® F-713可能減少涂膜的透明性。 | |
| Dynoadd® F-760 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in c...展開 Dynoadd® F-760 is a defoamer intended for use in water-borne industrial coating formulations including two-pack polyurethane formulations. It effectively prevents foam formation and rapidly destabilises and destroys foam in liquid coatings, resulting in coating surfaces that are easily recoated. Dynoadd® F-760 is based on a solution of foam destabilizing polymers and is silicone- and mineral oil-free. 收起 | |
| Dynoadd® F-800 | Dynoadd by Dynea 太尔化工 | DYNOADD® F -800是一種多官能團、附著力促進流動和流平劑。它改性塗料表面，大大改善對聚氨酯泡的吸附。作為一種有效的流動和流平添加劑，該產品可控制塗層表面張力，從而消除表面缺陷如橘皮、縮孔和針孔。DYNOADD® F -800對基材和顏料潤濕上也有積極作用。 | |
| Dynoadd® F-802 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured for...展開 Dynoadd® F-802 is a multi-functional, adhesion-promoting flow and leveling agent. Dynoadd® F-802 has similar properties to Dynoadd® F-800 but with considerably higher reactivity enabling immediate adhesion between the coated surface and the -NCO cured formulation. The novel surface active Dynoadd® F-802 polymer modifies coating surfaces in such a way that adhesion to -NCO curing formulations such as foam, adhesives, or coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-802 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. The properties of Dynoadd® F-802 make it ideal for formulating backer coatings which have good foam adhesion without the use of additional adhesion resins. The adhesion promoting properties are maintained even after repeated curing. 收起 | |
| Dynoadd® F-810 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effectiv...展開 Dynoadd® F-810 is a multi-functional, adhesion-promoting flow and leveling agent. The novel surface active Dynoadd® F-810 polymer modifies coating surfaces in such a way that adhesion to UV curing inks and coatings is considerably improved. As an effective flow and leveling additive Dynoadd® F-810 controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters, and pinholes. Dynoadd® F-810 also has a positive effect on substrate wetting. 收起 | |
| Dynoadd® P-506 | Dynoadd by Dynea 太尔化工 | Dynoadd P-506是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為6微米。 | |
| Dynoadd® P-510 | Dynoadd by Dynea 太尔化工 | Dynoadd P-510是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為10微米。 | |
| Dynoadd® P-515 | Dynoadd by Dynea 太尔化工 | Dynoadd P-515是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為15微米。 | |
| Dynoadd® P-520 | Dynoadd by Dynea 太尔化工 | Dynoadd P-520是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為20微米。 | |
| Dynoadd® P-530 | Dynoadd by Dynea 太尔化工 | Dynoadd P-530是一種單分散、球型顆粒添加劑，能夠生成質地非常精細和均勻的膜。顆粒尺寸分布非常一致，確保每一個顆粒都能發揮出良好的效果，與同類產品相比的添加量比較少。能夠提高抗刮擦性、持久改善滑爽度。顆粒尺寸為30微米。 | |
| Dynoadd® P-540 | Dynoadd by Dynea 太尔化工 | Dynoadd® P-540是一種單分散、球型顆粒添加劑，能夠產生細而均勻的塗膜紋理。粒子具有極窄的粒度分布，以確保每一個顆粒都能發揮應有的效果，因而比其它競爭技術降低了添加量。它們可以改善抗刮擦性，並賦予永久的滑爽度。Dynoadd® P-540具有40微米的粒度。 所述顆粒可用於溶劑型、水性和光固化塗料配方中。典型的應用是卷材塗料、家用電器、化妝品包裝、手機、汽車內飾、機械外殼、木器塗料以及光學塗層。 | |
| Dynoadd® R-1001 | Dynoadd by Dynea 太尔化工 | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...展開 Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. 收起 | |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. 收起 | |
| ETERNABRITE® 651-1 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset in...展開 ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset inks. ETERNABRITE® 651-1 has a mesh grade of 400 and is 42% non-volatile by volume. 收起 | |
| ETERNABRITE® 651-7 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and ...展開 ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and 72% non-volatile by weight. 收起 | |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous ...展開 ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. 收起 | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. 收起 | |
| Extra Fine GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigmen...展開 Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigment with good brightness. 收起 | |
| Hanos ASP-100F | Hanwha Chemical Corporation | Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos AST-100F | Hanwha Chemical Corporation | Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos MWCNT CM-150 | Hanwha Chemical Corporation | Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-150 Composite material is well suited for the production of ESD, EMI shielding, reinforced material, heat exchangers, etc. 收起 | |
| Hanos MWCNT CM-250 | Hanwha Chemical Corporation | Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-250 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-280 | Hanwha Chemical Corporation | Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-280 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-350 | Hanwha Chemical Corporation | Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-350 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos PS Compound / Sheet | Hanwha Chemical Corporation | Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a...展開 Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a filler in the production of sheets or as a black pigment in inks and paints. 收起 | |
| Hanos PS Ink | Hanwha Chemical Corporation | Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applicati...展開 Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos SW01 | Hanwha Chemical Corporation | Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos TW01 | Hanwha Chemical Corporation | Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha CP-710 | Hanwha Chemical Corporation | Hanwha CP-710 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-710 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展開 Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...展開 Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. 收起 | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...展開 Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. 收起 | |
| Hanwha TP-400M | Hanwha Chemical Corporation | Hanwha TP-400M is a PVC resin made from a terpolymer with outstanding adhesion to metals. It is well suited for use in the production of metal coatings, paints and aluminum printing inks. | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...展開 HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 收起 | |
| L-1015 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-1015 is a standard grade, class “C”, coarse leafing aluminum pigment carried in regular mineral spirits. | |
| L-10545WD Aluminum Pigment | Silberline Manufacturing Co., Inc. | L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pi...展開 L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation to determine its reactivity. 收起 | |
| L-11085 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-10545WD is a non-leafing aluminum paste. | |
| L-12683 | Silberline Manufacturing Co., Inc. | L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in ...展開 L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in all common organic solvents except aliphatic hydrocarbons. 收起 | |
| L-406AR Aluminum Paste | Silberline Manufacturing Co., Inc. | L-406AR is a medium particle size, bright, non-leafing aluminum pigment with a narrow particle size distribution. It provides exceptional brightness and is high purity. | |
| Lansford 243 Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range...展開 Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| Lansford 243GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wi...展開 Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| LE-12773 | Silberline Manufacturing Co., Inc. | LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. L...展開 LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. LE-12773 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LE-12774 | Silberline Manufacturing Co., Inc. | LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing ...展開 LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LT-1094 Aluminium Pigment | Silberline Manufacturing Co., Inc. | LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appe...展開 LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. LT-1094 is suitable for use in both plastics and powder coating applications. 收起 | |
| LT-12605 Aluminum Pigment | Silberline Manufacturing Co., Inc. | LT-12605 is a medium particle size, bright, Tufflake® Premier aluminum produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. | |
| LX-12860 Aluminum Paste | Silberline Manufacturing Co., Inc. | LX-12860 is a fine, bright aluminum flake product suitable for use in cross-link foam applications that require aluminum flake pigment and flame retardant carrier. | |
| Polytone AP 108 | Polyols and Polymers | Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展開 Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 108 is primarily used as an additive for rubber, upholstery, shoe, leather and many other types of adhesives. It is also used as an additive in coatings that provide strength and heat resistance. 收起 | |
| Polytone AP 109 | Polyols and Polymers | Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展開 Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 109 is primarily used to impart good open time combined with green tack and durability, and provides some heat resistance similar to Polytone AP 108 but not as strong of resistance. Polytone AP 109 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. 收起 | |
| Polytone AP 110 | Polyols and Polymers | Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展開 Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 110 is primarily used to impart good open time combined with green tack and durability, and provides heat resistance. Polytone AP 110 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. 收起 | |
| Polytone AP 111 | Polyols and Polymers | Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces an...展開 Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces and is formulated to be used in neoprene. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 111 is primarily used with adhesive grades of chloroprene that provides bond strength at room or higher temperatures. It is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. 收起 | |
| Polytone AP 121 | Polyols and Polymers | Polytone AP 121 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive adhesive resin that has a pale yellow-light reddish brown color, delivered as small solid. ...展開 Polytone AP 121 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive adhesive resin that has a pale yellow-light reddish brown color, delivered as small solid. Polytone AP 121 is primarily used as a tackifier in the production of mechanical goods. It is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. 收起 | |
| Polytone AP 122 | Polyols and Polymers | Polytone AP 122 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as sm...展開 Polytone AP 122 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. Polytone AP 122 is primarily used as a tackifier in the production of rubber goods and adhesives. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons. 收起 | |
| Polytone AP 130 | Polyols and Polymers | Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, deliv...展開 Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to give reliable performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, chip and abrasion resistance when cross-linked with methylene. Polytone AP 130 is primarily used as a reinforcing resin as a lining in several different rubber products and as an additive in rubber adhesives. It is soluble in ester, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. 收起 | |
| Polytone AP 131 | Polyols and Polymers | Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, deliv...展開 Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to be used in synthetic natural rubber based compounds. Polytone AP 131 is primarily used in applications that require high hardness in industrial areas to prevent chips and abrasion. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons. 收起 | |
| Polytone AP 132 | Polyols and Polymers | Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as...展開 Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as axs reinforcing resin in synthetic and natural rubber based goods that need high hardness along with chip and abrasion resistance when cross linked with a methylene product. Polytone AP 132 is primarily used as a reinforcing additive in rubber adhesives, conveyer belts, apex strips and many more. 收起 | |
| Polytone K 93 | Polyols and Polymers | Polytone K 93 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It imparts gloss, adhesiveness, leveling and also reduces levels in the VOC. The hydroxyl polarity allows for wetting of pigments...展開 Polytone K 93 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It imparts gloss, adhesiveness, leveling and also reduces levels in the VOC. The hydroxyl polarity allows for wetting of pigments and surfaces. Polytone K 93 is primarily used as an additive for polishing lacquers and finishes it is also used in heat seal coatings, primers and base coatings and gasoline resistant coatings. The different uses of Polytone K 93 are flexographic and gravure inks, ball point inks, Pants and coatings and different types of varnishes. 收起 | |
| Polytone K 94 | Polyols and Polymers | Polytone K 94 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to h...展開 Polytone K 94 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to have solvent retention. Plus this resin improves gloss, hardness, filling, adhesive strength and durability. Polytone K 94 is primarily used to impart gloss, adhesiveness in the inks and increase the solid content in flexographic and gravure inks, ball point inks, lacquers, varnishes, paintings and coatings. 收起 |
